Auto Parts Search
We have info for following modifications of 2005 Toyota Camry
- 2005 Toyota Camry 3.0 V6 GAS, CC:2995, Fuel Injection
- 2005 Toyota Camry 3.3 V6 GAS, CC:3300, CID:202, Fuel Injection, Aspiration:202
- 2005 Toyota Camry 2.4 L4 GAS, CC:2362, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 2005 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Toyota Camry cars and light trucks from 1990+.
Toyota -> Hydraulic Brake Systems -> Component Replacement -> Except Land Cruiser & 4Runner -> Except Sienna -> Land Cruiser & 4Runner -> Master Cylinder -> Models w/Load Sensing Proportioning Valve (LSPV) -> Models w/Proportioning & Bypass Valve (P-BV) -> Proportioning Valve -> Sienna -> Wheel Cylinders
Vehicle: 2005 Toyota Camry 3.3 V6 GAS
Master Cylinder
Except Sienna
- Remove brake fluid with syringe.
- On RAV4 models, remove air cleaner cover with air cleaner hose.
- On all models, label and disconnect brake lines using line wrench 09751-36011, 09023-00100, or equivalent. Cap brake lines from master cylinder.
- Disconnect wire connector from brake pressure switch and then disconnect level warning switch connector, if equipped.
- Remove master cylinder to brake unit attaching nuts, then remove master cylinder, wire clamp, gasket and 3-way union, as needed.
- Reverse procedure to install. Bleed brake system.
Sienna
- Remove air c...
CLICK HERE TO GET FULL ACCESS TO 2005 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Toyota Camry cars and light trucks from 1990+.
Toyota -> Rear Disc & Parking Brakes -> Caliper Service -> 2003-04 -> 2005 -> Avalon -> Camry, Camry Solara & Sienna -> Celica, Corolla & MR2 -> Highlander & RAV4 -> Land Cruiser, Sequoia & 4Runner -> Matrix -> Overhaul -> Replace
Vehicle: 2005 Toyota Camry 2.4 L4 GAS
Avalon
2003-04
Replace
- Raise and support rear of vehicle, then remove tire and wheel assembly.
- Disconnect brake hose from brake tube and caliper using a suitable tool.
- Remove caliper attaching bolts, then the caliper, Fig. .
- Remove anti-squeal shim(s), brake pad, anti-rattle spring, pad guide plate and pad support plate.
- Reverse procedure to install, then bleed brake system.
Overhaul
- Remove sliding bushing and boot.
- Remove main pin boot using a suitable chisel.
- Remove piston using compressed air. When using air pressure to remove caliper piston, place a shop towel over piston to prevent it...
CLICK HERE TO GET FULL ACCESS TO 2005 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Toyota Camry cars and light trucks from 1990+.
Toyota -> Rear Disc & Parking Brakes -> Caliper Service -> 2003-04 -> 2005 -> Avalon -> Camry, Camry Solara & Sienna -> Celica, Corolla & MR2 -> Highlander & RAV4 -> Land Cruiser, Sequoia & 4Runner -> Matrix -> Overhaul -> Replace
Vehicle: 2005 Toyota Camry 3.0 V6 GAS
Avalon
2003-04
Replace
- Raise and support rear of vehicle, then remove tire and wheel assembly.
- Disconnect brake hose from brake tube and caliper using a suitable tool.
- Remove caliper attaching bolts, then the caliper, Fig. .
- Remove anti-squeal shim(s), brake pad, anti-rattle spring, pad guide plate and pad support plate.
- Reverse procedure to install, then bleed brake system.
Overhaul
- Remove sliding bushing and boot.
- Remove main pin boot using a suitable chisel.
- Remove piston using compressed air. When using air pressure to remove caliper piston, place a shop towel over piston to prevent it...
CLICK HERE TO GET FULL ACCESS TO 2005 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Toyota Camry cars and light trucks from 1990+.
Toyota -> Hydraulic Brake Systems -> Description
Vehicle: 2005 Toyota Camry 2.4 L4 GAS
When the brake pedal is depressed, a vacuum builds up in the booster which amplifies the pedal force, pressing on the piston in the master cylinder. The piston raises the hydraulic pressure in the cylinder. This hydraulic ...
CLICK HERE TO GET FULL ACCESS TO 2005 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Toyota Camry cars and light trucks from 1990+.
Toyota -> Hydraulic Brake Systems -> Component Service -> Assemble -> Disassemble -> Except Sienna -> Inspection -> Master Cylinder -> Overhaul -> Sienna -> Wheel Cylinders
Vehicle: 2005 Toyota Camry 3.3 V6 GAS
Master Cylinder
Except Sienna
Disassemble
For the following procedures, refer to Fig. for assistance.
- Remove master cylinder boot.
- Remove setscrew and reservoir tank, then the cap and strainer from reservoir.
- Remove two grommets and place cylinder in vise.
- Push piston in and remove stopper bolt, Fig. .
- Push pistons in and remove snap ring, then No. 1 piston carefully by hand.
- Place cylinder on edges of two wooden blocks and tap on cylinder until No. 2 piston comes out.
Inspection
Clean components with compressed air. Inspect cylinder bore for rust and scoring. Also, inspect for wear or ...
CLICK HERE TO GET FULL ACCESS TO 2005 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2005 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2005 Toyota Camry cars and light trucks from 1990+.
Toyota -> Hydraulic Brake Systems -> Component Replacement -> Except Land Cruiser & 4Runner -> Except Sienna -> Land Cruiser & 4Runner -> Master Cylinder -> Models w/Load Sensing Proportioning Valve (LSPV) -> Models w/Proportioning & Bypass Valve (P-BV) -> Proportioning Valve -> Sienna -> Wheel Cylinders
Vehicle: 2005 Toyota Camry 2.4 L4 GAS
Master Cylinder
Except Sienna
- Remove brake fluid with syringe.
- On RAV4 models, remove air cleaner cover with air cleaner hose.
- On all models, label and disconnect brake lines using line wrench 09751-36011, 09023-00100, or equivalent. Cap brake lines from master cylinder.
- Disconnect wire connector from brake pressure switch and then disconnect level warning switch connector, if equipped.
- Remove master cylinder to brake unit attaching nuts, then remove master cylinder, wire clamp, gasket and 3-way union, as needed.
- Reverse procedure to install. Bleed brake system.
Sienna
- Remove air c...
CLICK HERE TO GET FULL ACCESS TO 2005 Toyota Camry BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2005 Toyota Camry vehicle. |
Access the Complete guide! |