Auto Parts Search
We have info for following modifications of 2005 Hyundai Tucson
- 2005 Hyundai Tucson GL 2.0 L4 GAS, CC:1975, Fuel Injection
- 2005 Hyundai Tucson GLS 2.7 V6 GAS, CC:2656, Fuel Injection
- 2005 Hyundai Tucson LX 2.7 V6 GAS, CC:2656, Fuel Injection
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 Hyundai Tucson AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2005 Hyundai Tucson cars and light trucks sold in the U.S. from 1990+.
Hyundai -> 4WD System Warning Lamp -> Santa Fe & Tucson
Vehicle: 2005 Hyundai Tucson GLS 2.7 V6 GAS
This lamp should light for a few seconds when the ignition is turned On as a bulb check. If th...
CLICK HERE TO GET FULL ACCESS TO 2005 Hyundai Tucson MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 Hyundai Tucson AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2005 Hyundai Tucson cars and light trucks sold in the U.S. from 1990+.
Hyundai -> Electronic Stability Program (ESP) Warning Lamp ->
Vehicle: 2005 Hyundai Tucson GL 2.0 L4 GAS
The ESP warning lamp is used to warn of a system fault. It will be lit when the ignition switch is placed in the on position, but should go out when the self-diagnostic system determines that the system is functioning properly. ...
CLICK HERE TO GET FULL ACCESS TO 2005 Hyundai Tucson MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 Hyundai Tucson AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2005 Hyundai Tucson cars and light trucks sold in the U.S. from 1990+.
Hyundai -> Air Bag (SRS) Service Reminder Lamp ->
Vehicle: 2005 Hyundai Tucson GL 2.0 L4 GAS
The Supplemental Restraint System (SRS) or air bag warning lamp should light for approximately 6 seconds wh...
CLICK HERE TO GET FULL ACCESS TO 2005 Hyundai Tucson MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 Hyundai Tucson AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2005 Hyundai Tucson cars and light trucks sold in the U.S. from 1990+.
Hyundai -> Check Engine/Malfunction Indicator Lamp (MIL) Lamp ->
Vehicle: 2005 Hyundai Tucson GLS 2.7 V6 GAS
The Check Engine/MIL lamp will be illuminated for approximately 5 seconds when the ignition switch is placed in the On position without starting the engine. When the engine is started, the lamp should go out. If it remains lit, a diagnostic trouble code has been stored by the electronic control system. On models less OBD II, after diagnosis and repair are complete, place ignition switch in Off position, then clear diagnostic trouble codes by disconnecting the battery ground cable or the ECM connector for at least 15 seconds. On models equipped with OBD II, following diagnosis ...
CLICK HERE TO GET FULL ACCESS TO 2005 Hyundai Tucson MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 Hyundai Tucson AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2005 Hyundai Tucson cars and light trucks sold in the U.S. from 1990+.
Hyundai -> Anti-Lock Brake Warning Lamp ->
Vehicle: 2005 Hyundai Tucson GL 2.0 L4 GAS
The Anti-Lock warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. If the ...
CLICK HERE TO GET FULL ACCESS TO 2005 Hyundai Tucson MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2005 Hyundai Tucson AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2005 Hyundai Tucson cars and light trucks sold in the U.S. from 1990+.
Hyundai -> Check Engine/Malfunction Indicator Lamp (MIL) Lamp ->
Vehicle: 2005 Hyundai Tucson GL 2.0 L4 GAS
The Check Engine/MIL lamp will be illuminated for approximately 5 seconds when the ignition switch is placed in the On position without starting the engine. When the engine is started, the lamp should go out. If it remains lit, a diagnostic trouble code has been stored by the electronic control system. On models less OBD II, after diagnosis and repair are complete, place ignition switch in Off position, then clear diagnostic trouble codes by disconnecting the battery ground cable or the ECM connector for at least 15 seconds. On models equipped with OBD II, following diagnosis ...
CLICK HERE TO GET FULL ACCESS TO 2005 Hyundai Tucson MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2005 Hyundai Tucson vehicle. |
Access the Complete guide! |