Auto Parts Search
We have info for following modifications of 2005 BMW X5
- 2005 BMW X5 4.4I 4.4 V8 GAS, CC:4398, Fuel Injection
- 2005 BMW X5 3.0I 3.0 L6 GAS, CC:2979, Fuel Injection
- 2005 BMW X5 4.8IS 4.8 V8 GAS, CC:4837, Fuel Injection
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2005 BMW X5 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2005 BMW X5 cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2005 BMW X5 4.4I 4.4 V8 GAS
- Disconnect battery ground cable.
- Remove bolts securing radiator cover.
- Disconnect cooling fan sensor connector.
- Disconnect oil cooler hoses. Drain fluid into suitable container and replace new O-rings upon installation.
- Lift fan cowl up and push retaining tabs in to remove fan cowl.
- Remove oil cooler mounting bolts from fan cowl and set aside.
- Raise vehicle on suitable lift.
- Remove retainers from lower engine splash shield.
- Open cap on coolant reservoir. Drain coolant into suitable container and never drain coolant when engine is hot to avoid scalding of skin.
- Open drain plug on bott...
CLICK HERE TO GET FULL ACCESS TO 2005 BMW X5 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2005 BMW X5 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2005 BMW X5 cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2005 BMW X5 4.8IS 4.8 V8 GAS
- Disconnect battery ground cable.
- Disconnect MAF sensor connector.
- Loosen hose clamp and detach air intake hose.
- Remove intake filter housing bolts then remove housing assembly.
- Remove bolts securing radiator cover.
- Disconnect cooling fan sensor connector.
- Disconnect oil cooler hoses. Drain fluid into suitable container and replace new O-rings upon installation.
- Lift fan cowl up and push retaining tabs in to remove fan cowl.
- Remove oil cooler mounting bolts from fan cowl and set aside.
- Remove fan clutch nuts using suitable tool.
- Rotate or lift belt tensioner arm...
CLICK HERE TO GET FULL ACCESS TO 2005 BMW X5 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2005 BMW X5 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2005 BMW X5 cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2005 BMW X5 3.0I 3.0 L6 GAS
- Disconnect battery ground cable.
- Twist and carefully pull idle speed sensor connector.
- Loosen clamp and detach air intake hose then unfasten hose clips.
- Release air cleaner housing with mass air flow sensor. Separate air cleaner housing from mass air flow sensor.
- Remove nuts using suitable tool securing fan clutch. Fan cowl may need to be removed to gain access to fan clutch assembly.
- Remove fan and clutch from coolant pump to remove. Turn fan clutch nuts clockwise to remove because of lefthand threads.
- Remove cap, loosen tensioner nut, and rotate or lift belt tensioner arm clockw...
CLICK HERE TO GET FULL ACCESS TO 2005 BMW X5 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2005 BMW X5 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2005 BMW X5 cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2005 BMW X5 4.8IS 4.8 V8 GAS
- Disconnect battery ground cable.
- Raise vehicle on suitable lift.
- Remove bolts from reinforcement plate then remove plate.
- Remove control sensor using suitable tool.
- Disconnect monitor connector.
- Remove crankshaft sensor using suitable tool.
- Remove nut from righthand engine mount.
- Raise engine using suitable lifting hardware tools.
- Remove bolts securing heat shield then remove shield.
- Disconnect S-terminal connector from start...
CLICK HERE TO GET FULL ACCESS TO 2005 BMW X5 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2005 BMW X5 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2005 BMW X5 cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2005 BMW X5 4.4I 4.4 V8 GAS
- Disconnect battery ground cable.
- Raise vehicle on suitable lift.
- Remove bolts securing engine under body cover then remove cover.
- Remove bolts from reinforcement plate then remove plate.
- Disconnect oxygen sensor connector.
- Remove control sensor using suitable tool.
- Disconnect monitor connector.
- Remove control sensor using suitable tool.
- Support exhaust system using suitable tool.
- Remove nuts and gasket from front exhaust pipe to engine manifold.
- Remove vacuum hose from vacuum unit and remove nut from exhaust bracket.
- Remove bolts from exhaust system reinforcement plate and lower exhaust s...
CLICK HERE TO GET FULL ACCESS TO 2005 BMW X5 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2005 BMW X5 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2005 BMW X5 cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2005 BMW X5 3.0I 3.0 L6 GAS
- Disconnect battery ground cable.
- Disconnect S-terminal connector nut from starter motor solenoid.
- Remove B+ terminal nut from starter motor solenoid.
- Remove bolts then remove starter motor assembly by pulling and turning to gain ...
CLICK HERE TO GET FULL ACCESS TO 2005 BMW X5 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2005 BMW X5 vehicle. |
Access the Complete guide! |