Auto Parts Search


      Over 40 million used auto parts online. Shop online for auto and truck parts and save up to 75%

Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!
Help me findSearch
Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 GMC Yukon car and truck repair procedures including GMC engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 2004 GMC Yukon automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >

We have info for following modifications of 2004 GMC Yukon

  • 2004 GMC Yukon 4.8 V8 GAS, CID:294, Fuel Injection, Aspiration:294, Engine VIN:, Desg:V
  • 2004 GMC Yukon 5.3 V8 GAS, CID:323, Fuel Injection, Aspiration:323, Engine VIN:, Desg:T
  • 2004 GMC Yukon 5.3 V8 FLEX, CID:323, Fuel Injection, Aspiration:323, Engine VIN:, Desg:Z
  • 2004 GMC Yukon Denali 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:U
  • 2004 GMC Yukon Denali XL 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:U

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 GMC Yukon AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 GMC Yukon cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2004 GMC Yukon 5.3 V8 GAS

Never clamp propeller shaft tubing in a vise. Clamping could dent or deform the tube causing an imbalance or unsafe condition. Always clamp on one of the yokes and support the shaft horizontally. Avoid damaging the slip yoke sealing surface. Nicks may damage the bushing or cut the lip seal.

Disassemble

  • Support propeller shaft in a line horizontal with table of a press.
  • Mark propeller shaft in order to show which end connects to transmission and which end goes to rear axle.
  • On models equipped with external snap ring retainers, proceed as follows:
    • Disassemble snap rings by ...

CLICK HERE TO GET FULL ACCESS TO 2004 GMC Yukon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 GMC Yukon AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 GMC Yukon cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2004 GMC Yukon 4.8 V8 GAS

Never clamp propeller shaft tubing in a vise. Clamping could dent or deform the tube causing an imbalance or unsafe condition. Always clamp on one of the yokes and support the shaft horizontally. Avoid damaging the slip yoke sealing surface. Nicks may damage the bushing or cut the lip seal.

Disassemble

  • Support propeller shaft in a line horizontal with table of a press.
  • Mark propeller shaft in order to show which end connects to transmission and which end goes to rear axle.
  • On models equipped with external snap ring retainers, proceed as follows:
    • Disassemble snap rings by ...

CLICK HERE TO GET FULL ACCESS TO 2004 GMC Yukon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 GMC Yukon AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 GMC Yukon cars and light trucks from 1990+.

DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2004 GMC Yukon Denali 6.0 V8 GAS

Front

Before disassembly, observe and accurately reference mark all driveline components relative to the propeller shaft and axles. These items include the propeller shafts, wheel drive shafts, pinion flanges and output shafts

Assemble all components in the exact relationship to each other as they were prior to removal. Observe all published specifications and torque values, and any measurements obtained prior to disassembly.

  • Raise and support vehicle.
  • Remove transfer case shield, if equipped.
  • If equipped with double clamp style boot, remove clamp at transfer case by prying up ex...

CLICK HERE TO GET FULL ACCESS TO 2004 GMC Yukon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 GMC Yukon AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 GMC Yukon cars and light trucks from 1990+.

CV AXLE SHAFT, Replace
Vehicle: 2004 GMC Yukon 4.8 V8 GAS

  • Raise and support vehicle.
  • Remove wheel and tire assembly.
  • Remove drive axle center cap, if equipped.
  • Insert a drift or large screwdriver through brake caliper into one of the brake rotor vanes in order to prevent drive axle wheel drive shaft from turning.
  • Remove nut and washer from hub. Do not reuse nut. A new nut must be used when installing wheel drive shaft.
  • Using J 45859 or equivalent, press wheel drive shaft from hub.
  • Remove bolts securing wheel drive shaft ...

CLICK HERE TO GET FULL ACCESS TO 2004 GMC Yukon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 GMC Yukon AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 GMC Yukon cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2004 GMC Yukon 5.3 V8 FLEX

Never clamp propeller shaft tubing in a vise. Clamping could dent or deform the tube causing an imbalance or unsafe condition. Always clamp on one of the yokes and support the shaft horizontally. Avoid damaging the slip yoke sealing surface. Nicks may damage the bushing or cut the lip seal.

Disassemble

  • Support propeller shaft in a line horizontal with table of a press.
  • Mark propeller shaft in order to show which end connects to transmission and which end goes to rear axle.
  • On models equipped with external snap ring retainers, proceed as follows:
    • Disassemble snap rings by ...

CLICK HERE TO GET FULL ACCESS TO 2004 GMC Yukon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 GMC Yukon AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 GMC Yukon cars and light trucks from 1990+.

DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2004 GMC Yukon Denali XL 6.0 V8 GAS

Front

Before disassembly, observe and accurately reference mark all driveline components relative to the propeller shaft and axles. These items include the propeller shafts, wheel drive shafts, pinion flanges and output shafts

Assemble all components in the exact relationship to each other as they were prior to removal. Observe all published specifications and torque values, and any measurements obtained prior to disassembly.

  • Raise and support vehicle.
  • Remove transfer case shield, if equipped.
  • If equipped with double clamp style boot, remove clamp at transfer case by prying up ex...

CLICK HERE TO GET FULL ACCESS TO 2004 GMC Yukon DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

Click here to view more details about 2005 GMC Yukon Parking Light, Passenger Side2005 GMC Yukon Parking Light, Passenger Side, Bulbs not included; DOT and SAE approved; A high quality, OE replacement parking light; Backed by 1-year, unlimited-mileage warranty..

Source: Auto Body Parts Store

$51.53

Click here to view more details about 1999 GMC Yukon Fender Flares, Front, Driver Side1999 GMC Yukon Fender Flares, Front, Driver Side, A high quality, OE replacement fender trim; Backed by 1-year, unlimited-mileage warranty..

Source: Auto Body Parts Store

$8.54

Click here to view more details2013 GMC Yukon Center Cap, Wheel Center Cap; Fits ALY05330; Chrome; Used, , .

Source: Wheels / Rims, Mirrors & Lights Store

$16.45

Click here to view more details2002 GMC Yukon V8, 5.3 L, 323 CID Rebuilt Engine, 5.3 CHEVY,GMC, Warranty: 3-Year/100,000 Mile, .

Source: Rebuilt Engines Store

$1,866.00

Click here to view more details2005 GMC Yukon Used Rear Axle Assembly, 4.8, AUTO, RWD, Very Good.

Source: Used Auto Parts Store

$815.00

Click here to view more details2000 GMC Yukon Used Air Flow Meter/Sensor, 5.3, AUTO, AWD, Very Good.

Source: Used Auto Parts Store

$61.00
More parts
Help me findSearch
Auto Repair Quick Search
Help me find
Search DIY repair manuals by VIN...
Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

Find out what info we have for your vehicle

Get the Complete Technical Service Bulletins!
Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2004 GMC Yukon vehicle.
Access the Complete guide!
Need To Fix Your Car or Truck?
Save Money With Free Car Insurance Quote
FREE car insurance quote
Enter Zip Code:
GOT A WEBSITE?Make money with Automotix

Make money with Automotix Partner Program.

Learn more

Auto Repair Quick Search
Help me find