Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2004 Ford Explorer car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2004 Ford Explorer automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2004 Ford Explorer
- 2004 Ford Explorer 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:E
- 2004 Ford Explorer 4.0 V6 FLEX, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:K
- 2004 Ford Explorer 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:W
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Ford Explorer AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Ford Explorer cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Four Wheel Drive (4WD) -> Front -> Rear -> Two Wheel Drive (2WD)
Vehicle: 2004 Ford Explorer 4.0 V6 GAS
Front
The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This can be accomplished by turning off the air suspension switch located in the rear jack storage area. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.
- With vehicle in neutral, raise and support vehicle.
- Index-mark front axle pinion flange to front driveshaft.
- Remove transfer case skid plate.
- Index-mark transfer case pinion flange to front ...
CLICK HERE TO GET FULL ACCESS TO 2004 Ford Explorer DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Ford Explorer AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Ford Explorer cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Four Wheel Drive (4WD) -> Front -> Rear -> Two Wheel Drive (2WD)
Vehicle: 2004 Ford Explorer 4.6 V8 GAS
Front
The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This can be accomplished by turning off the air suspension switch located in the rear jack storage area. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.
- With vehicle in neutral, raise and support vehicle.
- Index-mark front axle pinion flange to front driveshaft.
- Remove transfer case skid plate.
- Index-mark transfer case pinion flange to front ...
CLICK HERE TO GET FULL ACCESS TO 2004 Ford Explorer DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Ford Explorer AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Ford Explorer cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2004 Ford Explorer 4.0 V6 GAS
The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension vehicle. This can be accomplished by turning off the air suspension switch located in the rear jack storage area. Failure to do so can result in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations.
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove wheel hub retainer nut and washer assembly. Discard wheel hub retainer nut and washer assembly. It is a torque prevailing des...
CLICK HERE TO GET FULL ACCESS TO 2004 Ford Explorer DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Ford Explorer AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Ford Explorer cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 2004 Ford Explorer 4.6 V8 GAS
Single Cardan, Slip Yoke
Disassemble
Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.
- Index-mark the shaft components.
- Remove and discard all four snap rings.
- Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
- If necessary, use a pair of pliers to remove a bearing cup t...
CLICK HERE TO GET FULL ACCESS TO 2004 Ford Explorer DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Ford Explorer AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Ford Explorer cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 2004 Ford Explorer 4.0 V6 FLEX
Single Cardan, Slip Yoke
Disassemble
Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.
- Index-mark the shaft components.
- Remove and discard all four snap rings.
- Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
- If necessary, use a pair of pliers to remove a bearing cup t...
CLICK HERE TO GET FULL ACCESS TO 2004 Ford Explorer DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2004 Ford Explorer AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2004 Ford Explorer cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble -> Single Cardan, Flange Yoke -> Single Cardan, Slip Yoke
Vehicle: 2004 Ford Explorer 4.0 V6 GAS
Single Cardan, Slip Yoke
Disassemble
Do not, under any circumstance, clamp the shaft in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing shaft failure during vehicle operation. Place the shaft on a suitable workbench. Do not damage the tube. If components are not marked and installed incorrectly, driveline imbalance can occur.
- Index-mark the shaft components.
- Remove and discard all four snap rings.
- Clamp bearing cup removal tool No. 205-086 or equivalent in a vise.
- If necessary, use a pair of pliers to remove a bearing cup t...
CLICK HERE TO GET FULL ACCESS TO 2004 Ford Explorer DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
 | 2006 Ford Explorer Mirror, Passenger Side, Manual folding; Corner mount type; Includes 1 smooth cap, 1 chrome cap, and 6-prong connector; With puddle light; A high quality, OE replacement mirror; Backed by 2-year Kool Vue limited warranty.. | $75.96 |
 | 2001 Ford Explorer Headlight, Passenger Side, Comes with bulbs and backed by 1-year, unlimited-mileage warranty.<p>Be safe! Replace your worn out or broken lights with these DOT and SAE Approved lighting products. They are made to stand rough road wear and the test of time!<br>. | $30.63 |
 | 2005 Ford Explorer Power Door Mirror, Passenger Side, PASSENGER SIDE POWER DOOR MIRROR, WITHOUT HEATED GLASS, WITH PUDDLE LAMP, BLACK TEXTURED, , . | $81.91 |
 | 2001 Ford Explorer V6, 4 L, 245 CID Rebuilt Engine, Explorer/Ranger All & Manual trans Aerostar Van, Block # 95TM-AB, Head # 95TM. Supplied with new head casting., Warranty: 7-Year/70,000 Mile, . | $1,969.00 |
 | 2002 Ford Explorer Used Starter, 4.6, AUTO, RWD, Very Good. | $81.00 |
| 2006 Ford Explorer Used Alternator, 4.0, AUTO, 61K, 4X2 6-245 (4.0L), (115 amp), Very Good. | $79.00 |
| More parts | ||
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2004 Ford Explorer vehicle.
|
| Access the Complete guide! |
