Auto Parts Search
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2004 Chrysler Pacifica AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2004 Chrysler Pacifica cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2004 Chrysler Pacifica 3.5 V6 GAS
Refer to F...
CLICK HERE TO GET FULL ACCESS TO 2004 Chrysler Pacifica TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2004 Chrysler Pacifica AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2004 Chrysler Pacifica cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures -> Vehicles Built After 7/28/03 -> Vehicles Built Before 7/10/03
Vehicle: 2004 Chrysler Pacifica 3.5 V6 GAS
Vehicles Built Before 7/10/03
WARNING: Serious injury may result if magnetically sensitive devices are exposed to the relearn magnet. The relearn magnets may affect pacemaker operation.
Each time a tire rotation is performed or a tire pressure sensor is replaced, all four road wheel tire pressure sensors must be relearned. Do not attempt to relearn individual sensors.
- Place the ignition switch in the On position.
- Press the Menu button on instrument cluster until RETRAIN TIRE SENSORS? is displayed.
- Press step button, the display should now read TRAIN LEFT FRONT SENSOR.
- There is a 6...
CLICK HERE TO GET FULL ACCESS TO 2004 Chrysler Pacifica TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2004 Chrysler Pacifica AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2004 Chrysler Pacifica cars and light trucks sold in the U.S. from mid 1990's+.
Reset Procedures
Vehicle: 2004 Chrysler Pacifica 3.5 V6 GAS
The Low Tire Pressure indicator lamp will flash slowly and sound a single tone when tire pressure is low. If tire pressure drops lower, the indicator lamp will flash rapidly and the tone will be continuous. When the tire is inflated to the proper pressure the lamp and tone will ...
CLICK HERE TO GET FULL ACCESS TO 2004 Chrysler Pacifica TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2004 Chrysler Pacifica AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2004 Chrysler Pacifica cars and light trucks sold in the U.S. from mid 1990's+.
Description -> Vehicles Built After 7/28/03 -> Vehicles Built Before 7/10/03
Vehicle: 2004 Chrysler Pacifica 3.5 V6 GAS
The vehicle build date is located on the vehicle certification label. The vehicle certification label is attached to the rear shut face of the driver's door.
Vehicles Built Before 7/10/03
The TPMS (Tire Pressure Monitoring System) monitors air pressure in all four road wheels, but not monitored in the spare tire. The TPMS uses radio and sensor technology to monitor tire air pressure levels. Sensors are mounted to each road wheel as part of the valve stem. Each sensor transmits tire pressure readings to the receiver located in the vehicle's overhead console. These transmissions occur o...
CLICK HERE TO GET FULL ACCESS TO 2004 Chrysler Pacifica TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2004 Chrysler Pacifica AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2004 Chrysler Pacifica cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Compass Mini Trip Computer (CMTC) Module Replacement -> Installation -> Removal -> Sentry Remote Entry Module (SKREEM) Replacement -> Tire Pressure Sensor -> Vehicles Built After 7/28/03 -> Vehicles Built Before 7/10/03
Vehicle: 2004 Chrysler Pacifica 3.5 V6 GAS
Tire Pressure Sensor
The cap used on this valve stem contains an O-ring seal to prevent contamination and moisture from entering the valve stem. Retain this valve stem cap for reuse. Do not substitute a regular valve stem cap in its place.
The valve stem used on this vehicle is made of aluminum and the core is nickel plated brass. The original valve stem core must be reinstalled and not substituted with a valve stem core made of a different material. This is required to prevent corrosion in the valve stem caused by the different metals.
The tire pressure sensor is equipped w...
CLICK HERE TO GET FULL ACCESS TO 2004 Chrysler Pacifica TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2004 Chrysler Pacifica AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2004 Chrysler Pacifica cars and light trucks sold in the U.S. from mid 1990's+.
Diagnosis & Testing -> Initialization Fault, Pressure Alert Or Transmit Failure -> Intermittent & Poor Connections -> Intermittents -> Poor Connections -> Scan Tool Messages -> Sensor Fault Or Low Battery -> Test Procedure -> Tire Pressure Sensor Check -> TPMS Diagnosis -> Vehicles Built After 7/28/03 -> Vehicles Built Before 7/10/03
Vehicle: 2004 Chrysler Pacifica 3.5 V6 GAS
Depending on the vehicle build date, the TPMS (Tire Pressure Monitoring System) may be controlled by CMTC (Compass Mini Trip Computer) or the Sentry Remote Entry Module. Early build vehicles use a system that is controlled through the Compass Mini Trip Computer. Late build vehicles use a system that is controlled by the Sentry Remote Entry Module. To identify which type system the vehicle is equipped with use a suitably programmed scan tool accessing the SKREEM (Sentry Remote Entry Module) to determine if it has TPMS capabilities. If the Sentry Remote Entry Module does not h...
CLICK HERE TO GET FULL ACCESS TO 2004 Chrysler Pacifica TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2004 Chrysler Pacifica vehicle. |
Access the Complete guide! |