Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2003 Toyota Camry car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2003 Toyota Camry automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2003 Toyota Camry
- 2003 Toyota Camry 3.0 V6 GAS, CC:2995, Fuel Injection
- 2003 Toyota Camry 2.4 L4 GAS, CC:2362, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 2003 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Toyota Camry cars and light trucks from 1990+.
Toyota -> Power Brake Units -> Troubleshooting
Vehicle: 2003 Toyota Camry 2.4 L4 GAS
Refer to Fig. for gener...
CLICK HERE TO GET FULL ACCESS TO 2003 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Toyota Camry cars and light trucks from 1990+.
Toyota -> Power Brake Units -> Diagnosis & Testing -> Air Tightness Check -> Brake Booster Operational Test -> Operating Check
Vehicle: 2003 Toyota Camry 2.4 L4 GAS
Brake Booster Operational Test
Operating Check
- Depress brake pedal several times with engine stopped, and ensure pedal reserve distance has no change, Fig. .
- Depress brake pedal and start engine. If pedal drops slightly, operation is normal.
Air Tightness Check
- Start engine and stop after one or two minutes.
- Depress brake peda...
CLICK HERE TO GET FULL ACCESS TO 2003 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Toyota Camry cars and light trucks from 1990+.
Toyota -> Hydraulic Brake Systems -> Description
Vehicle: 2003 Toyota Camry 3.0 V6 GAS
When the brake pedal is depressed, a vacuum builds up in the booster which amplifies the pedal force, pressing on the piston in the master cylinder. The piston raises the hydraulic pressure in the cylinder. This hydraulic ...
CLICK HERE TO GET FULL ACCESS TO 2003 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Toyota Camry cars and light trucks from 1990+.
Toyota -> Hydraulic Brake Systems -> Precautions -> Audio Coded Anti-Theft System
Vehicle: 2003 Toyota Camry 3.0 V6 GAS
Audio Coded Anti-Theft System
Some models are equipped with an audio coded anti-theft system that will disable the radio when the battery cable is disconnected. The system can be identified by the "ANTI-THEFT SYSTEM" on the cassette tape lid. Obtain 3 digit customer code for input. Reset system after service as follows:
- Obtain 3 digit audio anti-theft code.
- Depress 1 (PROG) while depressing righthand side of TUNE SEEK button, - - - will appear in tape operation display.
- To enter the first digit, depress 1 (PROG) button repeatedly until the number of times depressed equals the first digit ...
CLICK HERE TO GET FULL ACCESS TO 2003 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Toyota Camry cars and light trucks from 1990+.
Toyota -> Rear Disc & Parking Brakes -> Brake Pad Service -> 2003-04 -> 2005 -> Avalon -> Camry, Camry Solara & Sienna -> Celica, Corolla, & MR2 -> Highlander & RAV4 -> Land Cruiser, Sequoia & 4Runner -> Matrix
Vehicle: 2003 Toyota Camry 3.0 V6 GAS
Avalon
2003-04
- Raise and support rear of vehicle, then remove tire and wheel assembly.
- Remove caliper attaching bolts, then the caliper, Fig. . Do not allow caliper to hang unsupported or damage to the brake hose may occur.
- Remove pads and anti-squeal shim(s).
- Remove anti-rattle springs, pad guide plates and support plate.
- Reverse procedure to install.
2005
- Raise and support vehicle, then remove rear wheel.
- Remove union bolt, gasket and flexible hose from brake caliper,
- Remove slide pin and caliper, Fig. .
- Remove brake pads, brake pad support plate and shims.
- Reverse procedure to install...
CLICK HERE TO GET FULL ACCESS TO 2003 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2003 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2003 Toyota Camry cars and light trucks from 1990+.
Toyota -> Drum Brakes -> Brake Service -> 2WD -> 4WD -> Camry & Camry Solara -> Celica, Corolla & Matrix -> Echo -> Inspection -> Installation -> RAV4 -> Removal -> Replacement -> Sienna -> Tacoma -> Tundra
Vehicle: 2003 Toyota Camry 3.0 V6 GAS
Camry & Camry Solara
Removal
- Raise and support rear of vehicle, then remove wheel and tire assembly.
- Remove brake drum. If brake drum cannot be remove easily, insert a suitable screwdriver through hole in backing plate, then push adjuster lever away from adjuster and back of adjustment tension.
- Disconnect return spring, then remove front shoe hold-down spring, retainers and pin.
- Disconnect anchor spring, then remove front brake shoe and anchor spring, Fig. .
- Remove rear shoe hold-down spring, retainers and pin, using suitable tool, then disconnect parking brake cable from anchor plate.
- D...
CLICK HERE TO GET FULL ACCESS TO 2003 Toyota Camry BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
 | 2001 Toyota Camry Door Handle Trim, Front Or Rear, Passenger Side, A high quality, direct fit OE replacement door handle case; With 18 months limited Prozone warranty.. | $4.48 |
 | 2009 Toyota Camry Tail Light, Passenger Side. | $55.75 |
 | 2012 Toyota Camry Mirror Cover, MIRROR COVER;FULL;12 CAMRY , , . | $55.75 |
 | 1991 Toyota Camry Dlx L4, 2 L, 1998 CC Rebuilt Engine, DOHC, fwd, 6 bolt flywheel, Fits 8/86-5/89., Warranty: 7-Year/70,000 Mile, . | $2,371.00 |
 | 2002 Toyota Camry Used Starter, 2.4, AUTO, 79K, FWD (1.6kw), Very Good. | $87.00 |
| 1994 Toyota Camry Used Exhaust Manifold, 6 CYL, L. (FR), FED, Very Good. | $145.00 |
| More parts | ||
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2003 Toyota Camry vehicle.
|
| Access the Complete guide! |
