Auto Parts Search
We have info for following modifications of 2003 KIA RIO
- 2003 KIA RIO 1.6 L4 GAS, CC:1594, Fuel Injection
- 2003 KIA RIO Cinco 1.6 L4 GAS, CC:1594, Fuel Injection
- 2003 KIA RIO RX-V 1.6 L4 GAS, CC:1594, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 KIA RIO AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 KIA RIO cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2003 KIA RIO 1.6 L4 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove drain plug and drain transaxle fluid in suitable container.
- Remove driveshaft cotter pin, castle nut and washer from front hub.
- Remove tension rod mounting nuts.
- Remove ball joint clamp mounting bolt from knuckle.
- Pry down lower arm and disconnect ball joint.
- Remove stabilizer bar from control link after loosening control link nut.
- Insert suitable tool between transaxle case and driveshaft assembly, then separate driveshaft...
CLICK HERE TO GET FULL ACCESS TO 2003 KIA RIO DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 KIA RIO AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 KIA RIO cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2003 KIA RIO RX-V 1.6 L4 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove drain plug and drain transaxle fluid in suitable container.
- Remove driveshaft cotter pin, castle nut and washer from front hub.
- Remove tension rod mounting nuts.
- Remove ball joint clamp mounting bolt from knuckle.
- Pry down lower arm and disconnect ball joint.
- Remove stabilizer bar from control link after loosening control link nut.
- Insert suitable tool between transaxle case and driveshaft assembly, then separate driveshaft...
CLICK HERE TO GET FULL ACCESS TO 2003 KIA RIO DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 KIA RIO AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 KIA RIO cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2003 KIA RIO Cinco 1.6 L4 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove drain plug and drain transaxle fluid in suitable container.
- Remove driveshaft cotter pin, castle nut and washer from front hub.
- Remove tension rod mounting nuts.
- Remove ball joint clamp mounting bolt from knuckle.
- Pry down lower arm and disconnect ball joint.
- Remove stabilizer bar from control link after loosening control link nut.
- Insert suitable tool between transaxle case and driveshaft assembly, then separate driveshaft...
CLICK HERE TO GET FULL ACCESS TO 2003 KIA RIO DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2003 KIA RIO vehicle. |
Access the Complete guide! |