Auto Parts Search
We have info for following modifications of 2003 Ford Escape
- 2003 Ford Escape 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:1
- 2003 Ford Escape 2.0 L4 GAS, CC:1989, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:B
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2003 Ford Escape AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2003 Ford Escape cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2003 Ford Escape 2.0 L4 GAS
- Disconnect battery ground cable.
- Remove alternator drive belt.
- Disconnect alternator electrical connectors.
- Remove lower alternator bolts.
- Loosen but do not remove upper alternator bolt from engine. Insufficient clearance does not allow for removal of bolt.
- Move ...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Escape STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2003 Ford Escape AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2003 Ford Escape cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 2003 Ford Escape 3.0 V6 GAS
- Disconnect battery ground cable.
- Remove righthand front brake rotor.
- Remove and discard righthand front axle wheel hub nut.
- Release tie rod end from righthand steering knuckle using a suitable tie rod end removal tool.
- Remove lower ball joint pinch bolt and nut, then release righthand lower ball joint from steering knuckle.
- Separate righthand halfshaft from front wheel knuckle, using suitable front hub removal tool, then remove halfshaft.
- Remove intermediate shaft retainer nuts, then righthand intermediate shaft.
- Remove righthand lower splash shield screws and pin type retainers, t...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Escape STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2003 Ford Escape AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2003 Ford Escape cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2003 Ford Escape 2.0 L4 GAS
- Disconnect battery ground cable.
- Remove starter mounting bolts.
- Raise and support vehicle.
- Remove halfshaft support bracket bolts and nuts.
- Remove battery cable and starter control electrical connector nuts.
- Remove starter from vehi...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Escape STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 2003 Ford Escape AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 2003 Ford Escape cars and light trucks from 1990+.
Starter, Replace
Vehicle: 2003 Ford Escape 3.0 V6 GAS
- Disconnect battery ground cable.
- Remove air cleaner box.
- Disconnect transmission shift cable-to-manual lever.
- Remove transmission cable bracket bolts and detach wire harness retainer.
- Position aside transmission cable and bracket.
- Remove starter motor solenoid wire nut.
- Remove starter motor solenoid battery cable nut and position aside ...
CLICK HERE TO GET FULL ACCESS TO 2003 Ford Escape STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2003 Ford Escape vehicle. |
Access the Complete guide! |