2002 Chrysler Concorde Maintenance Lamp Reset (ONLINE REPAIR MANUALS)

Auto Parts Search


Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!
Help me findSearch
Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2002 Chrysler Concorde car and truck repair procedures including Chrysler engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 2002 Chrysler Concorde automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >

We have info for following modifications of 2002 Chrysler Concorde

  • 2002 Chrysler Concorde Limited 3.5 V6 GAS, CC:3497, CID:215, Fuel Injection, Aspiration:215, Engine VIN:, Desg:G
  • 2002 Chrysler Concorde LX 2.7 V6 GAS, CC:2700, CID:167, Fuel Injection, Aspiration:167, Engine VIN:, Desg:R
  • 2002 Chrysler Concorde LXI 3.5 V6 GAS, CC:3497, CID:215, Fuel Injection, Aspiration:215, Engine VIN:, Desg:M

MAINTENANCE LAMP RESET PROCEDURES FOR 2002 Chrysler Concorde AUTOMOBILES

Maintenance lamp reset procedures with corresponding images for most domestic and imported 2002 Chrysler Concorde cars and light trucks sold in the U.S. from 1990+.

Chrysler LLC Cars -> Check Engine Lamp -> Acclaim, Concord, Daytona, Dynasty, Imperial, Intrepid, LeBaron, LHS, New Yorker, Shadow, Spirit, Sundance, Vision & Viper
Vehicle: 2002 Chrysler Concorde Limited 3.5 V6 GAS

On models less OBD II, the Check Engine lamp should light for approximately 3 seconds after the ignition has been turned On as a bulb inspection. If improper or no signals are received by the Powertrain Control Module (PCM) from various sensors and monitored systems or if the PCM enters its Limp-In mode, the PCM will light the Check Engine lamp. After diagnosing and servicing the vehicle, the PCM memory will be cleared after approximately 40 to 100 ignition key On-Off cycle...

CLICK HERE TO GET FULL ACCESS TO 2002 Chrysler Concorde MAINTENANCE LAMP RESET PROCEDURES

MAINTENANCE LAMP RESET PROCEDURES FOR 2002 Chrysler Concorde AUTOMOBILES

Maintenance lamp reset procedures with corresponding images for most domestic and imported 2002 Chrysler Concorde cars and light trucks sold in the U.S. from 1990+.

Chrysler LLC Cars -> Electronic Vehicle Information Center (EVIC) -> Concorde, Intrepid, LHS & 300M
Vehicle: 2002 Chrysler Concorde Limited 3.5 V6 GAS

The Electronic Vehicle Information Center is located in a overhead console, and is programmable by driver to suit his driving needs.

  • Place the ignition in On position.
  • Depress and release the menu push button to display the first programmable feature.
  • Momentarily depress and release the step push button to step through following programmable features:
    • Language.
    • Display U.S. or metric.
    • Auto door locks?
    • Auto unlock on exit?
    • Remote unlock.
    • Remote linked to memory.
    • Sound horn on lock?
    • Flash lights with lock...

CLICK HERE TO GET FULL ACCESS TO 2002 Chrysler Concorde MAINTENANCE LAMP RESET PROCEDURES

MAINTENANCE LAMP RESET PROCEDURES FOR 2002 Chrysler Concorde AUTOMOBILES

Maintenance lamp reset procedures with corresponding images for most domestic and imported 2002 Chrysler Concorde cars and light trucks sold in the U.S. from 1990+.

Chrysler LLC Cars -> Electronic Throttle Control (ETC) Warning Light ->
Vehicle: 2002 Chrysler Concorde LXI 3.5 V6 GAS

This light will turn on briefly as a bulb check when the ignition switch is placed in the on position. This light will also turn on while the engine is run...

CLICK HERE TO GET FULL ACCESS TO 2002 Chrysler Concorde MAINTENANCE LAMP RESET PROCEDURES

MAINTENANCE LAMP RESET PROCEDURES FOR 2002 Chrysler Concorde AUTOMOBILES

Maintenance lamp reset procedures with corresponding images for most domestic and imported 2002 Chrysler Concorde cars and light trucks sold in the U.S. from 1990+.

Chrysler LLC Cars -> Electronic Vehicle Information Center (EVIC) -> Concorde, Intrepid, LHS & 300M
Vehicle: 2002 Chrysler Concorde LXI 3.5 V6 GAS

The Electronic Vehicle Information Center is located in a overhead console, and is programmable by driver to suit his driving needs.

  • Place the ignition in On position.
  • Depress and release the menu push button to display the first programmable feature.
  • Momentarily depress and release the step push button to step through following programmable features:
    • Language.
    • Display U.S. or metric.
    • Auto door locks?
    • Auto unlock on exit?
    • Remote unlock.
    • Remote linked to memory.
    • Sound horn on lock?
    • Flash lights with lock...

CLICK HERE TO GET FULL ACCESS TO 2002 Chrysler Concorde MAINTENANCE LAMP RESET PROCEDURES

MAINTENANCE LAMP RESET PROCEDURES FOR 2002 Chrysler Concorde AUTOMOBILES

Maintenance lamp reset procedures with corresponding images for most domestic and imported 2002 Chrysler Concorde cars and light trucks sold in the U.S. from 1990+.

Chrysler LLC Cars -> Compass & Temperature Mini Trip Computer -> Concorde, Intrepid, LHS, New Yorker, Vision & 300M -> Compass Calibration -> Variance Setting
Vehicle: 2002 Chrysler Concorde Limited 3.5 V6 GAS

Compass Calibration

  • Place the ignition switch in the On position, then set mini trip computer to Compass/Temp mode, Fig. .
  • Press and hold the RESET button until CAL is displayed.
  • Drive the vehicle in one complete circle at a speed of 3-5 mph. This should be done on a level surface free of large metal objects such as other vehicles, bridges, buildings, railroads and underground cables.
  • When the CAL indicator turns Off, the compass has been calibrated and should now display proper headings.
  • Inspect for proper calibrations...

CLICK HERE TO GET FULL ACCESS TO 2002 Chrysler Concorde MAINTENANCE LAMP RESET PROCEDURES

MAINTENANCE LAMP RESET PROCEDURES FOR 2002 Chrysler Concorde AUTOMOBILES

Maintenance lamp reset procedures with corresponding images for most domestic and imported 2002 Chrysler Concorde cars and light trucks sold in the U.S. from 1990+.

Chrysler LLC Cars -> Power Loss/Limit Lamp -> Chrysler, Dodge & Plymouth
Vehicle: 2002 Chrysler Concorde LX 2.7 V6 GAS

The Power Loss/Limit lamp should light for approximately 3 seconds after the ignition has been turned On as a bulb inspection. If improper or no signals are received by the logic module from various sensors, the logic modul...

CLICK HERE TO GET FULL ACCESS TO 2002 Chrysler Concorde MAINTENANCE LAMP RESET PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

More parts
Help me findSearch
Auto Repair Quick Search
Help me find
Search DIY repair manuals by VIN...
Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

Find out what info we have for your vehicle

Get the Complete Technical Service Bulletins!
Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2002 Chrysler Concorde vehicle.
Access the Complete guide!
Need To Fix Your Car or Truck?
Save Money With Free Car Insurance Quote
FREE car insurance quote
Enter Zip Code:
Auto Repair Quick Search
Help me find