2002 Chevrolet S10 Pickup Driveline, U-Joint & CV Axles Replacement (ONLINE REPAIR MANUALS)

Auto Parts Search


Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!
Help me findSearch
Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2002 Chevrolet S10 Pickup car and truck repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 2002 Chevrolet S10 Pickup automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >

We have info for following modifications of 2002 Chevrolet S10 Pickup

  • 2002 Chevrolet S10 Pickup 4.3 V6 GAS, CID:262, Fuel Injection, Aspiration:262, Engine VIN:, Desg:W
  • 2002 Chevrolet S10 Pickup 2.2 L4 FLEX, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:5

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Chevrolet S10 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Chevrolet S10 Pickup cars and light trucks from 1990+.

CV AXLE SHAFT, Replace
Vehicle: 2002 Chevrolet S10 Pickup 4.3 V6 GAS

  • Unlock steering column so that steering linkage is free to move.
  • Raise the vehicle. Support vehicle with suitable safety stands.
  • Remove front tire and wheel assemblies.
  • In order to prevent drive axle from turning, insert a drift through brake caliper and into one of the rotor vanes.
  • Remove axle nut and washer.
  • Remove drift from brake rotor.
  • Remove front brake rotors and support caliper with piece of wire in order to prevent damage to brake hose.
  • Remove brackets from upper control arm holding both ABS wire and brake hose.
  • Remove ABS bracket located on top of upper control arm ball...

CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet S10 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Chevrolet S10 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Chevrolet S10 Pickup cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2002 Chevrolet S10 Pickup 2.2 L4 FLEX

Never clamp propeller shaft tubing in a vise. Clamping could dent or deform the tube causing an imbalance or unsafe condition. Always clamp on one of the yokes and support the shaft horizontally. Avoid damaging the slip yoke sealing surface. Nicks may damage the bushing or cut the lip seal.

Disassemble

  • Support propeller shaft in a line horizontal with table of a press.
  • Mark propeller shaft in order to show which end connects to transmission and which end goes to rear axle.
  • On models equipped with external snap ring retainers, proceed as follows:
    • Disassemble snap rings by ...

CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet S10 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Chevrolet S10 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Chevrolet S10 Pickup cars and light trucks from 1990+.

DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Two Piece Driveshaft
Vehicle: 2002 Chevrolet S10 Pickup 2.2 L4 FLEX

Front

  • Raise and support vehicle.
  • Mark the front U-joint to the pinion yoke on the front differential.
  • Mark the relationship of the rear U-joint to the transfer case drive flange.
  • Remove the retaining nuts and bolts from the drive flange.
  • Remove the clamps and retaining bolts from the front drive axle pinion flange.
  • Remove the front propeller shaft from the vehicle.
  • Using tape and or a rubber band, wrap the front U-joint bearing caps to ensure the caps do not separate from the U-joint.
  • Reverse procedure to install, noting the following:
    • Torque front propeller shaft to the pinion flang...

CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet S10 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Chevrolet S10 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Chevrolet S10 Pickup cars and light trucks from 1990+.

DRIVESHAFT, Replace -> Front -> One Piece Driveshaft -> Rear -> Two Piece Driveshaft
Vehicle: 2002 Chevrolet S10 Pickup 4.3 V6 GAS

Front

  • Raise and support vehicle.
  • Mark the front U-joint to the pinion yoke on the front differential.
  • Mark the relationship of the rear U-joint to the transfer case drive flange.
  • Remove the retaining nuts and bolts from the drive flange.
  • Remove the clamps and retaining bolts from the front drive axle pinion flange.
  • Remove the front propeller shaft from the vehicle.
  • Using tape and or a rubber band, wrap the front U-joint bearing caps to ensure the caps do not separate from the U-joint.
  • Reverse procedure to install, noting the following:
    • Torque front propeller shaft to the pinion flang...

CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet S10 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Chevrolet S10 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Chevrolet S10 Pickup cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2002 Chevrolet S10 Pickup 4.3 V6 GAS

Never clamp propeller shaft tubing in a vise. Clamping could dent or deform the tube causing an imbalance or unsafe condition. Always clamp on one of the yokes and support the shaft horizontally. Avoid damaging the slip yoke sealing surface. Nicks may damage the bushing or cut the lip seal.

Disassemble

  • Support propeller shaft in a line horizontal with table of a press.
  • Mark propeller shaft in order to show which end connects to transmission and which end goes to rear axle.
  • On models equipped with external snap ring retainers, proceed as follows:
    • Disassemble snap rings by ...

CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet S10 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Chevrolet S10 Pickup AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Chevrolet S10 Pickup cars and light trucks from 1990+.

CV AXLE SHAFT, Replace
Vehicle: 2002 Chevrolet S10 Pickup 2.2 L4 FLEX

  • Unlock steering column so that steering linkage is free to move.
  • Raise the vehicle. Support vehicle with suitable safety stands.
  • Remove front tire and wheel assemblies.
  • In order to prevent drive axle from turning, insert a drift through brake caliper and into one of the rotor vanes.
  • Remove axle nut and washer.
  • Remove drift from brake rotor.
  • Remove front brake rotors and support caliper with piece of wire in order to prevent damage to brake hose.
  • Remove brackets from upper control arm holding both ABS wire and brake hose.
  • Remove ABS bracket located on top of upper control arm ball...

CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet S10 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

More parts
Help me findSearch
Auto Repair Quick Search
Help me find
Search DIY repair manuals by VIN...
Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

Find out what info we have for your vehicle

Get the Complete Technical Service Bulletins!
Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2002 Chevrolet S10 Pickup vehicle.
Access the Complete guide!
Need To Fix Your Car or Truck?
Save Money With Free Car Insurance Quote
FREE car insurance quote
Enter Zip Code:
Auto Repair Quick Search
Help me find