Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2002 Chevrolet Corvette car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2002 Chevrolet Corvette automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2002 Chevrolet Corvette
- 2002 Chevrolet Corvette 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:G
- 2002 Chevrolet Corvette Z06 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:S
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2002 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2002 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Component Replacement -> Installation -> Removal -> Tire Pressure Indicator Sensor
Vehicle: 2002 Chevrolet Corvette 5.7 V8 GAS
Tire Pressure Indicator Sensor
Removal
- Loosen the lug nuts.
- Raise and support vehicle with jack stands, then remove the wheel and tire assembly.
- Prior to dismounting the tire from the wheel, note the following precautions:
- Position the bead breaking fixture 90° from the valve stem when separating the tire bead from the wheel.
- Place the mounting and dismounting head so that the tire iron or pry bar can be inserted slightly clockwise of the sensor body when prying the tire bead up and over the head.
- Rotate the tire and wheel assembly clockwise using the tire changer when transferri...
CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2002 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2002 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Description
Vehicle: 2002 Chevrolet Corvette 5.7 V8 GAS
The TPMS warns the driver when a significant loss, or gain of tire pressure occurs in any of the four tires and allows the driver to display the individual tire pressures and the locations on the DIC (Driver Information Center) display. The system uses the PCM (Powertrain Control Module), BCM (Body Control Module), DIC, IPC (Instrument Panel Cluster), remote control door lock receiver, a radio frequency transmitting pressure sensor in each wheel assembly and the serial data circuit.
When the vehicle is stationary for 15 minutes or longer, the sensor goes into the stationary mode. In ...
CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2002 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2002 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Diagnosis & Testing -> Accessing Diagnostic Trouble Codes -> Diagnostic Tests -> Intermittent & Poor Connections -> Intermittents -> Poor Connections
Vehicle: 2002 Chevrolet Corvette 5.7 V8 GAS
Accessing Diagnostic Trouble Codes
Connect a suitably programmed scan tool to DLC (Data Link Connector) and follow manufacturer's instructions.
Diagnostic Tests
Refer to Figs. and for diagnostic test procedures.
Intermittent & Poor Connections
Intermittents
Most intermittents are caused by faulty electrical connections or wiring. Inspect for the following:
- Wiring broken inside insulation.
- Poor connection between male and female terminal at connector.
- Poor terminal to wire connection. Some conditions which fall under this are:
- Poor crimps.
- Poor solder joints.
- Crimping over wire insulat...
CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2002 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2002 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Component Locations
Vehicle: 2002 Chevrolet Corvette Z06 5.7 V8 GAS
Refer to F...
CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2002 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2002 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Wiring Diagrams -> Wire Color Code Identification
Vehicle: 2002 Chevrolet Corvette Z06 5.7 V8 GAS
Refer to Figs. and for wir...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 2002 Chevrolet Corvette AUTOMOBILES
Description, component locations, reset procedures, relearn procedures, diagnosis and testing, wiring diagrams, component replacement, and identification of vehicles equipped and not equipped with tire pressure monitoring system for most domestic and imported 2002 Chevrolet Corvette cars and light trucks sold in the U.S. from mid 1990's+.
Relearn Procedures
Vehicle: 2002 Chevrolet Corvette 5.7 V8 GAS
- Place the ignition in the On position.
- Press the reset button to clear any IPC warning messages.
- Press and release the Options button on the DIC to scroll through display until Options is blank.
- Press Options button again until Tire Training message is displayed.
- Press the Reset Button until IPC Learn L Front Tire message is displayed to begin the progra...
CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet Corvette TIRE PRESSURE MONITORING SYSTEM PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2002 Chevrolet Corvette vehicle.
|
| Access the Complete guide! |
