2001 Toyota Tundra Driveline, U-Joint & CV Axles Replacement (ONLINE REPAIR MANUALS)

Auto Parts Search


Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!
Help me findSearch
Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2001 Toyota Tundra car and truck repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 2001 Toyota Tundra automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >

We have info for following modifications of 2001 Toyota Tundra

  • 2001 Toyota Tundra 4.7 V8 GAS, CC:4663, CID:285, Fuel Injection, Aspiration:285
  • 2001 Toyota Tundra 3.4 V6 GAS, CC:3378, Fuel Injection

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2001 Toyota Tundra AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2001 Toyota Tundra cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2001 Toyota Tundra 4.7 V8 GAS

Disassemble

This procedure describes a driveline equipped with cardan joint in tube yoke. Driveline equipped with companion/slip yoke repeat steps to remove remaining cardan joint.

  • Place driveshaft on suitable workbench. Do not damage driveshaft when servicing on workbench. Ensure driveline and components are reference marked to prevent driveline imbalance. Do not tighten driveshaft too tightly in a vise because this will cause driveline to become out of balance and result in driveline vibration.
  • Tap outside of bearing cap with a drift to loosen snap ring.
  • Remove snap ri...

CLICK HERE TO GET FULL ACCESS TO 2001 Toyota Tundra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2001 Toyota Tundra AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2001 Toyota Tundra cars and light trucks from 1990+.

DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2001 Toyota Tundra 4.7 V8 GAS

Front

  • Place vehicle in neutral.
  • Release parking brake.
  • Raise and support vehicle and support it with safety stands in proper locations.
  • Place matchmarks on the propeller shaft and front differential flanges.
  • Remove bolts, nuts, and washers from differential flange.
  • Suspend the front side of the propeller shaft.
  • Place matchmarks on the propeller shaft and transfer flanges.
  • Remove bolts, nuts, and washers from transfer flanges.
  • Remove front propeller shaft.
  • Reverse procedure to install, noting the following:
    • Torque differential flange bolts to 54 ft. lbs.
    • Torque ...

CLICK HERE TO GET FULL ACCESS TO 2001 Toyota Tundra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2001 Toyota Tundra AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2001 Toyota Tundra cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2001 Toyota Tundra 3.4 V6 GAS

Disassemble

This procedure describes a driveline equipped with cardan joint in tube yoke. Driveline equipped with companion/slip yoke repeat steps to remove remaining cardan joint.

  • Place driveshaft on suitable workbench. Do not damage driveshaft when servicing on workbench. Ensure driveline and components are reference marked to prevent driveline imbalance. Do not tighten driveshaft too tightly in a vise because this will cause driveline to become out of balance and result in driveline vibration.
  • Tap outside of bearing cap with a drift to loosen snap ring.
  • Remove snap ri...

CLICK HERE TO GET FULL ACCESS TO 2001 Toyota Tundra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2001 Toyota Tundra AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2001 Toyota Tundra cars and light trucks from 1990+.

CV AXLE SHAFT, Replace
Vehicle: 2001 Toyota Tundra 4.7 V8 GAS

  • Raise and support vehicle.
  • Remove wheel and tire assembly.
  • Remove engine under-cover.
  • Drain differential oil.
  • Remove drive shaft lock nut grease cap, using a screwdriver and hammer.
  • Remove cotter pin and lock cap from drive shaft lock nut.
  • With an assistant applying brakes, remove drive shaft lock nut.
  • Remove cotter pin and nut from lower ball joint.
  • Disconnect lower suspension arm, using a suitable pry tool.
  • Disconnect drive shaft from hub by pushing steering knuckle outward. Be careful not to damage oil seal, bo...

CLICK HERE TO GET FULL ACCESS TO 2001 Toyota Tundra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2001 Toyota Tundra AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2001 Toyota Tundra cars and light trucks from 1990+.

DRIVESHAFT, Replace -> Front -> Rear
Vehicle: 2001 Toyota Tundra 3.4 V6 GAS

Front

  • Place vehicle in neutral.
  • Release parking brake.
  • Raise and support vehicle and support it with safety stands in proper locations.
  • Place matchmarks on the propeller shaft and front differential flanges.
  • Remove bolts, nuts, and washers from differential flange.
  • Suspend the front side of the propeller shaft.
  • Place matchmarks on the propeller shaft and transfer flanges.
  • Remove bolts, nuts, and washers from transfer flanges.
  • Remove front propeller shaft.
  • Reverse procedure to install, noting the following:
    • Torque differential flange bolts to 54 ft. lbs.
    • Torque ...

CLICK HERE TO GET FULL ACCESS TO 2001 Toyota Tundra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2001 Toyota Tundra AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2001 Toyota Tundra cars and light trucks from 1990+.

CV AXLE SHAFT, Replace
Vehicle: 2001 Toyota Tundra 3.4 V6 GAS

  • Raise and support vehicle.
  • Remove wheel and tire assembly.
  • Remove engine under-cover.
  • Drain differential oil.
  • Remove drive shaft lock nut grease cap, using a screwdriver and hammer.
  • Remove cotter pin and lock cap from drive shaft lock nut.
  • With an assistant applying brakes, remove drive shaft lock nut.
  • Remove cotter pin and nut from lower ball joint.
  • Disconnect lower suspension arm, using a suitable pry tool.
  • Disconnect drive shaft from hub by pushing steering knuckle outward. Be careful not to damage oil seal, bo...

CLICK HERE TO GET FULL ACCESS TO 2001 Toyota Tundra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

More parts
Help me findSearch
Auto Repair Quick Search
Help me find
Search DIY repair manuals by VIN...
Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

Find out what info we have for your vehicle

Get the Complete Technical Service Bulletins!
Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2001 Toyota Tundra vehicle.
Access the Complete guide!
Need To Fix Your Car or Truck?
Save Money With Free Car Insurance Quote
FREE car insurance quote
Enter Zip Code:
Auto Repair Quick Search
Help me find