Auto Parts Search
We have info for following modifications of 2001 Toyota Tundra
- 2001 Toyota Tundra 4.7 V8 GAS, CC:4663, CID:285, Fuel Injection, Aspiration:285
- 2001 Toyota Tundra 3.4 V6 GAS, CC:3378, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 2001 Toyota Tundra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Toyota Tundra cars and light trucks from 1990+.
Power Brake Units -> Description
Vehicle: 2001 Toyota Tundra 4.7 V8 GAS
When the brake pedal is depressed, a vacuum builds up in the booster which amplifies the pedal force, pressing on the piston in the master cylinder. The piston raises the hydraulic pressure in the cylinder. This hydr...
CLICK HERE TO GET FULL ACCESS TO 2001 Toyota Tundra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Toyota Tundra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Toyota Tundra cars and light trucks from 1990+.
Disc Brakes -> Rear Disc & Parking Brakes -> Tightening Specifications
Vehicle: 2001 Toyota Tundra 3.4 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 2001 Toyota Tundra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Toyota Tundra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Toyota Tundra cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Assemble -> Disassemble -> Except Sienna -> Inspection -> Master Cylinder -> Overhaul -> Sienna -> Wheel Cylinders
Vehicle: 2001 Toyota Tundra 4.7 V8 GAS
Master Cylinder
Except Sienna
Disassemble
For the following procedures, refer to Fig. for assistance.
- Remove master cylinder boot.
- Remove setscrew and reservoir tank, then the cap and strainer from reservoir.
- Remove two grommets and place cylinder in vise.
- Push piston in and remove stopper bolt, Fig. .
- Push pistons in and remove snap ring, then No. 1 piston carefully by hand.
- Place cylinder on edges of two wooden blocks and tap on cylinder until No. 2 piston comes out.
Inspection
Clean parts with compressed air. Inspect cylinder bore for rust and scoring. Also, inspect for wear or damag...
CLICK HERE TO GET FULL ACCESS TO 2001 Toyota Tundra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Toyota Tundra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Toyota Tundra cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> ABS Computer -> Brake Actuator -> Brake Lines -> Brake System Bleed -> Component Replacement -> Master Cylinder
Vehicle: 2001 Toyota Tundra 4.7 V8 GAS
Brake System Bleed
Master Cylinder
- Fill reservoir.
- Disconnect master cylinder tubes.
- Slowly depress brake pedal and hold.
- Block outlet holes with fingers and release pedal.
- Repeat 3-4 times.
Brake Lines
Bleed wheel with longest brake line first, then work your way back to the master cylinder according to brake line length.
- Connect brake cylinder tube.
- Depress pedal several times and hold.
- Loosen bleeder plug.
- When fluid stops coming out, tighten bleeder plug and release pedal.
- Repeat several times.
- Repeat entire procedure for each wheel.
- Fill reservoir.
Component Replacement
Brake Actuator
- Remove ...
CLICK HERE TO GET FULL ACCESS TO 2001 Toyota Tundra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Toyota Tundra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Toyota Tundra cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> ABS Computer -> Brake Actuator -> Brake Lines -> Brake System Bleed -> Component Replacement -> Master Cylinder
Vehicle: 2001 Toyota Tundra 3.4 V6 GAS
Brake System Bleed
Master Cylinder
- Fill reservoir.
- Disconnect master cylinder tubes.
- Slowly depress brake pedal and hold.
- Block outlet holes with fingers and release pedal.
- Repeat 3-4 times.
Brake Lines
Bleed wheel with longest brake line first, then work your way back to the master cylinder according to brake line length.
- Connect brake cylinder tube.
- Depress pedal several times and hold.
- Loosen bleeder plug.
- When fluid stops coming out, tighten bleeder plug and release pedal.
- Repeat several times.
- Repeat entire procedure for each wheel.
- Fill reservoir.
Component Replacement
Brake Actuator
- Remove ...
CLICK HERE TO GET FULL ACCESS TO 2001 Toyota Tundra BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Toyota Tundra AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Toyota Tundra cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Caliper Service -> 2WD -> 4Runner -> Avalon, Camry, Camry Solara, Corolla, Celica, Highlander, MR2 & Sienna -> Echo & RAV4 -> Land Cruiser -> Overhaul -> Replace -> Sequoia & Tundra -> Supra -> T100 -> Tacoma -> Tercel
Vehicle: 2001 Toyota Tundra 4.7 V8 GAS
Avalon, Camry, Camry Solara, Corolla, Celica, Highlander, MR2 & Sienna
Replace
- Raise and support vehicle and remove front wheel.
- Remove union bolt and disconnect brake hose. Use suitable container to catch brake fluid.
- Remove caliper, Figs. through .
- Remove anti-squeal shims and brake pad wear indicator plates.
- Remove support plates.
- Reverse procedure to install.
Overhaul
- Remove caliper.
- Remove the following parts:
- Caliper slide bushings.
- Dust boots.
- Collars.
- Using screwdriver, remove caliper boot set ring and boot.
- Place suitable rag between caliper and piston and using compressed air, remov...
CLICK HERE TO GET FULL ACCESS TO 2001 Toyota Tundra BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2001 Toyota Tundra vehicle. |
Access the Complete guide! |