Auto Parts Search
BRAKE SERVICE PROCEDURES FOR 2001 Mazda B3000 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Mazda B3000 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> B-Series -> Except B-Series & Tribute -> Manual -> Pressure -> Tribute
Vehicle: 2001 Mazda B3000 3.0 V6 GAS
Except B-Series & Tribute
- Raise and support vehicle with jack stands.
- Fill reservoir with brake fluid, ensure reservoir is at least half full at all times during bleeding procedure.
- After removing bleeder cap, connect one end of transparent vinyl tube to bleeder and place other end in a clean, clear container that is half full with brake fluid.
- One person should depress pedal a few times, then hold the pedal depressed.
- A second person should loosen the bleeder screw and drain fluid, then retighten screw to specifications.
- Repeat steps 4 and 5 until there are no more air bubbles see...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda B3000 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Mazda B3000 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Mazda B3000 cars and light trucks from 1990+.
Anti-lock Brakes -> Precautions -> Audio Coded Anti-Theft System -> Battery Ground Cable
Vehicle: 2001 Mazda B3000 3.0 V6 GAS
Battery Ground Cable
Prior to service, disconnect battery ground cable and isolate as required.
Audio Coded Anti-Theft System
The audio system's anti-theft feature renders the system inoperable after power to the audio unit has been interrupted. Obtaining the anti-theft security code prior to performing repairs will ensure restoration of audio system operation in case the vehicle battery is disconnected or power to the audio unit is otherwise lost during repairs.
Always obtain the security code before interrupting power to the audio unit. To reactivate the unit after power is restored, ...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda B3000 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Mazda B3000 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Mazda B3000 cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> B-Series -> Front -> Miata -> Millenia -> MPV -> MX-6 & 626 -> Protege -> Rear -> Tribute
Vehicle: 2001 Mazda B3000 3.0 V6 GAS
Front
B-Series
- Raise and support vehicle and remove front wheel assemblies.
- Use a C-clamp to compress caliper piston into bore.
- Remove caliper pin bolts, Figs. through .
- Remove caliper from disc plate and position aside. Do not let caliper hang with its weight suspended by brake hose.
- Slide disc pads off caliper anchor plate.
- Inspect all components for wear or damage.
- Reverse procedure to install. Caliper must be bottomed out to install new disc pads.
Miata
- Raise and support front of vehicle, then remove front wheels.
- Remove components in order, Fig. , noting the following:
- After removin...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda B3000 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Mazda B3000 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Mazda B3000 cars and light trucks from 1990+.
Disc Brakes -> Parking Brake Service -> 1997-98 -> 2000-01 -> Millenia -> MPV -> Replacement
Vehicle: 2001 Mazda B3000 3.0 V6 GAS
Replacement
Millenia
- Remove rear brake assembly, then remove parking brake shoe upper and lower return springs. If parking brake shoes prevent assembly from being removed, remove rotor service plug and use a suitable screwdriver to rotate shoe adjuster in direction opposite arrow mark on rotor.
- Remove shoe hold springs and pins, Fig. , then the shoes, adjuster and operating lever.
- Inspect parking brake components as follows:
- Inspect shoe contact surface on inside of rotor. If abnormal wear or scratches are evident, or if inner diameter exceeds 7.52 inches, replace rotor.
- Inspect...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda B3000 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Mazda B3000 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Mazda B3000 cars and light trucks from 1990+.
Drum Brakes -> Brake Service
Vehicle: 2001 Mazda B3000 3.0 V6 GAS
For brake drum and brake shoe replacement procedures, r...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda B3000 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Mazda B3000 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Mazda B3000 cars and light trucks from 1990+.
Drum Brakes -> Adjustments -> B-Series -> Except B-Series -> Parking Brake
Vehicle: 2001 Mazda B3000 3.0 V6 GAS
Parking Brake
B-Series
The parking brake on these vehicles is self adjusting. Depress parking brake completely to the f...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda B3000 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2001 Mazda B3000 vehicle. |
Access the Complete guide! |