Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 Nissan Pathfinder car and truck
repair procedures including Nissan engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2000 Nissan Pathfinder automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 2000 Nissan Pathfinder AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Nissan Pathfinder cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> 1997 -> 1997-98 -> 1997-99 -> 1998-2001 -> 1999-2002 -> 2000-02 -> 2002 -> 200SX -> 240SX -> ABS Actuator, Replacement -> Altima -> Altima, Maxima, Pathfinder, Quest, Sentra, 200SX & 240SX -> Brake System Bleed -> Component Replacement -> Frontier -> Frontier & Xterra -> Maxima -> Pathfinder -> Pickup -> Quest -> Sentra -> Wheel Sensor, Replacement -> Xterra
Vehicle: 2000 Nissan Pathfinder 3.3 V6 GAS
Brake System Bleed
Refer to "Hydraulic Brake Systems" for brake bleed procedure.
Component Replacement
ABS Actuator, Replacement
Altima
1997
- Remove actuator relay assembly.
- Drain brake fluid into a suitable container.
- Remove master cylinder.
- Disconnect brake pipes.
- Disconnect ABS actuator harness connectors Fig. .
- Remove ABS actuator retaining bolts and actuator.
- Reverse procedure to install. Bleed air from system.
1998-2001
- Disconnect ABS actuator and control unit harness connectors.
- Remove ABS actuator and control unit retaining bolts and assembly.
- Reverse procedure to install.
2002
- Remove windshi...
CLICK HERE TO GET FULL ACCESS TO 2000 Nissan Pathfinder BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Nissan Pathfinder AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Nissan Pathfinder cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Anti-Lock Brakes -> Less Anti-Lock Brakes
Vehicle: 2000 Nissan Pathfinder 3.3 V6 GAS
Less Anti-Lock Brakes
Do not spill brake fluid on painted surfaces, it may cause damage to the paint. If brake fluid is spilled, wash immediately with water.
- Place container under master cylinder to avoid spillage, then fill master cylinder with brake fluid.
- Connect hose to bleeder valves, then depress brake pedal several times.
- With pressure applied to pedal open bleeder valve to release air trapped in system.
- Close bleeder, then release pedal slowly.
- Repeat steps 3 and 4 as outlined above until all air is removed from system.
- Bleed air from system in order as follows:
- Left rear whe...
CLICK HERE TO GET FULL ACCESS TO 2000 Nissan Pathfinder BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Nissan Pathfinder AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Nissan Pathfinder cars and light trucks from 1990+.
Power Brake Units -> Troubleshooting
Vehicle: 2000 Nissan Pathfinder 3.3 V6 GAS
- With engine off, depress brake pedal several times. There should be no change in pedal stroke.
- With brake pedal depressed, start engine. Pedal should go down slightly.
- Run engine for two minutes, then turn engine off. Depress brake pedal slowly several times.
- Pe...
CLICK HERE TO GET FULL ACCESS TO 2000 Nissan Pathfinder BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Nissan Pathfinder AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Nissan Pathfinder cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Altima, Maxima, Sentra & 200SX -> Cleaning & Inspection -> External Proportioning Valve -> Frontier, Pathfinder & Pickup -> Master Cylinder Overhaul -> Overhaul -> Quest -> Replacement -> Testing
Vehicle: 2000 Nissan Pathfinder 3.3 V6 GAS
Master Cylinder Overhaul
Overhaul
Refer to Figs. through , for master cylinder overhaul procedures, noting the following:
- If piston assembly is stuck in cylinder bore, gradually apply air to fluid outlet port.
- Replace stopper cap if claws are damaged. Bend claw inward when installing new stopper.
Cleaning & Inspection
Examine reservoirs for foreign matter and check all passages for restrictions. If there is any indication of contamination or evidence of corrosion, service the hydraulic system as needed.
When disassembled, wash all parts in denatured alcohol or clean brake fluid. Use...
CLICK HERE TO GET FULL ACCESS TO 2000 Nissan Pathfinder BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Nissan Pathfinder AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Nissan Pathfinder cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Front -> Overhaul -> Rear -> Replacement
Vehicle: 2000 Nissan Pathfinder 3.3 V6 GAS
Front
Replacement
- Raise and support front of vehicle and remove wheels.
- Disconnect brake hose from brake tube.
- Remove caliper assembly from spindle.
- Reverse procedure to install.
Overhaul
- Remove pin bolts and separate cylinder body from torque member.
- Remove pad retainers, shims and brake pads.
- Feed compressed air gradually into caliper port and force out piston(s) with dust seals.
- Remove piston seals, sub pins, main pins and dust seals.
- Reverse procedure to assemble.
Rear
Replacement
- Disconnect parking brake cable and brake hose.
- Remove caliper retaining bolts and caliper from vehicle.
- Reverse...
CLICK HERE TO GET FULL ACCESS TO 2000 Nissan Pathfinder BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Nissan Pathfinder AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Nissan Pathfinder cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> Front -> Rear
Vehicle: 2000 Nissan Pathfinder 3.3 V6 GAS
Front
- Raise and support front of vehicle and remove wheels.
- Remove brake hose lock spring and lower pin bolt Figs. through , then pivot caliper body upwards.
- Remove pad retainers, inner and outer shims and pads.
- Install new inner pad and pivot caliper downward.
- Compress piston(s) by inserting bar through caliper opening and prying against torque member.
- Pivot caliper u...
CLICK HERE TO GET FULL ACCESS TO 2000 Nissan Pathfinder BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2000 Nissan Pathfinder vehicle.
|
| Access the Complete guide! |
