Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 Honda Accord car and truck
repair procedures including Honda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2000 Honda Accord automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2000 Honda Accord
- 2000 Honda Accord SE 2.3 L4 GAS, CC:2254, Fuel Injection
- 2000 Honda Accord SE 2.3 L4 GAS, CC:2254, Fuel Injection
- 2000 Honda Accord DX 2.3 L4 GAS, CC:2254, Fuel Injection
- 2000 Honda Accord EX 3.0 V6 GAS, CC:2997, Fuel Injection
- 2000 Honda Accord EX 2.3 L4 GAS, CC:2254, Fuel Injection
- 2000 Honda Accord EX 2.3 L4 GAS, CC:2254, Fuel Injection
- 2000 Honda Accord LX 3.0 V6 GAS, CC:2997, Fuel Injection
- 2000 Honda Accord LX 2.3 L4 GAS, CC:2254, Fuel Injection
- 2000 Honda Accord LX 2.3 L4 GAS, CC:2254, Fuel Injection
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Honda Accord AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Honda Accord cars and light trucks sold in the U.S. from 1990+.
Honda -> Check Engine Lamp -> 1998-2002 Accord
Vehicle: 2000 Honda Accord LX 2.3 L4 GAS
The vehicle's radio may have a coded theft protection circuit. The code number should be verified prior to disconnecting the battery ground cable.
The Check Engine/PGM-FI warning lamp should be illuminated for approximately 2 seconds after the ignition switch is placed in the On position as a bulb check. After approximately 2 seconds, the lamp should go out. If the lamp remains lit, a problem in the Programmed Fuel Injection (PGM-FI) system is indicated and a diagnostic trouble code is stored in the Electroni...
CLICK HERE TO GET FULL ACCESS TO 2000 Honda Accord MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Honda Accord AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Honda Accord cars and light trucks sold in the U.S. from 1990+.
Honda -> Air Bag Warning Lamp ->
Vehicle: 2000 Honda Accord EX 3.0 V6 GAS
The air bag warning lamp will light for a few seconds when the ignition switch is placed in the on position as a bulb check. I...
CLICK HERE TO GET FULL ACCESS TO 2000 Honda Accord MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Honda Accord AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Honda Accord cars and light trucks sold in the U.S. from 1990+.
Honda -> Electric Power Steering (EPS) Warning Indicator ->
Vehicle: 2000 Honda Accord EX 2.3 L4 GAS
The Electric Power Steering (EPS) warning lamp should be illuminate when the ignition switch is placed in the On position and should turn Off as soon as the engine is started. If the indicator comes On while driving the vehicle, pull the vehicle off to the side of the road. Restart the system by restarting the engine. If the indicator does not go Off after driving a short distance, or comes On again, a fault in the electric ...
CLICK HERE TO GET FULL ACCESS TO 2000 Honda Accord MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Honda Accord AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Honda Accord cars and light trucks sold in the U.S. from 1990+.
Honda -> Side Air Bag Off Lamp ->
Vehicle: 2000 Honda Accord EX 2.3 L4 GAS
This indicator should light for a few seconds when the ignition switch placed in the On position and then go Off. The lamp is used a an alert that the passenger side air bag has been automatically shut off. The passenger side air bag w...
CLICK HERE TO GET FULL ACCESS TO 2000 Honda Accord MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Honda Accord AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Honda Accord cars and light trucks sold in the U.S. from 1990+.
Honda -> Check Engine Lamp -> 1998-2002 Accord
Vehicle: 2000 Honda Accord LX 3.0 V6 GAS
The vehicle's radio may have a coded theft protection circuit. The code number should be verified prior to disconnecting the battery ground cable.
The Check Engine/PGM-FI warning lamp should be illuminated for approximately 2 seconds after the ignition switch is placed in the On position as a bulb check. After approximately 2 seconds, the lamp should go out. If the lamp remains lit, a problem in the Programmed Fuel Injection (PGM-FI) system is indicated and a diagnostic trouble code is stored in the Electroni...
CLICK HERE TO GET FULL ACCESS TO 2000 Honda Accord MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Honda Accord AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Honda Accord cars and light trucks sold in the U.S. from 1990+.
Honda -> Anti-Lock Brake System (ABS)/VSA System Warning Lamp -> 1998-2002 Accord
Vehicle: 2000 Honda Accord EX 2.3 L4 GAS
The Anti-Lock warning lamp is used to warn of a system fault. The lamp monitors the condition of the anti-lock brake system. It will be lit during engine start-up, but should go off when the self-diagnostic system determines that the system is operating properly. If the lamp remains lit, a fault in the anti-lock brake system is indicated. After diagnosis and repair of the system, clear the ABS DTCs as follows:
- Place ignition switch in the Off position.
- Connect the Honda PGM Tester, or equivalent suitable scan tool, to the DLC connector located behind the driver's kick panel.
- Selec...
CLICK HERE TO GET FULL ACCESS TO 2000 Honda Accord MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2000 Honda Accord vehicle.
|
| Access the Complete guide! |
