Auto Parts Search
We have info for following modifications of 2000 GMC Savana 2500
- 2000 GMC Savana 2500 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:R
- 2000 GMC Savana 2500 4.3 V6 GAS, CID:262, Fuel Injection, Aspiration:262, Engine VIN:, Desg:W
- 2000 GMC Savana 2500 5.0 V8 GAS, CID:305, Fuel Injection, Aspiration:305, Engine VIN:, Desg:M
- 2000 GMC Savana 2500 6.5 V8 DIESEL, CID:395, Fuel Injection, Aspiration:395, Engine VIN:, Desg:F
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 GMC Savana 2500 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 GMC Savana 2500 cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2000 GMC Savana 2500 6.5 V8 DIESEL
Never clamp propeller shaft tubing in a vise. Clamping could dent or deform the tube causing an imbalance or unsafe condition. Always clamp on one of the yokes and support the shaft horizontally. Avoid damaging the slip yoke sealing surface. Nicks may damage the bushing or cut the lip seal.
Disassemble
- Support propeller shaft in a line horizontal with table of a press.
- Mark propeller shaft in order to show which end connects to transmission and which end goes to rear axle.
- On models equipped with external snap ring retainers, proceed as follows:
- Disassemble snap rings by ...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Savana 2500 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 GMC Savana 2500 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 GMC Savana 2500 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> One Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 2000 GMC Savana 2500 4.3 V6 GAS
One Piece Driveshaft
- Raise and support vehicle.
- Mark rear universal joint to drive shaft flange.
- Remove retaining bolts and clamps.
- Remove propeller shaft from pinion drive flange.
- Remove propeller shaft from transmission/transfer case.
- Using tape or a rubber band, wrap the U-Joint bearing caps to ensure bearing caps do not separate from U-Joint.
- Reverse procedure to install, noting the following:
- Align reference marks made during removal.
- Torque yoke retainer bolts to 18 ft. lbs.
Two Piece Driveshaft
- Raise and support vehicle.
- Suppor...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Savana 2500 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 GMC Savana 2500 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 GMC Savana 2500 cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2000 GMC Savana 2500 4.3 V6 GAS
Never clamp propeller shaft tubing in a vise. Clamping could dent or deform the tube causing an imbalance or unsafe condition. Always clamp on one of the yokes and support the shaft horizontally. Avoid damaging the slip yoke sealing surface. Nicks may damage the bushing or cut the lip seal.
Disassemble
- Support propeller shaft in a line horizontal with table of a press.
- Mark propeller shaft in order to show which end connects to transmission and which end goes to rear axle.
- On models equipped with external snap ring retainers, proceed as follows:
- Disassemble snap rings by ...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Savana 2500 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 GMC Savana 2500 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 GMC Savana 2500 cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2000 GMC Savana 2500 5.0 V8 GAS
Never clamp propeller shaft tubing in a vise. Clamping could dent or deform the tube causing an imbalance or unsafe condition. Always clamp on one of the yokes and support the shaft horizontally. Avoid damaging the slip yoke sealing surface. Nicks may damage the bushing or cut the lip seal.
Disassemble
- Support propeller shaft in a line horizontal with table of a press.
- Mark propeller shaft in order to show which end connects to transmission and which end goes to rear axle.
- On models equipped with external snap ring retainers, proceed as follows:
- Disassemble snap rings by ...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Savana 2500 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 GMC Savana 2500 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 GMC Savana 2500 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> One Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 2000 GMC Savana 2500 5.0 V8 GAS
One Piece Driveshaft
- Raise and support vehicle.
- Mark rear universal joint to drive shaft flange.
- Remove retaining bolts and clamps.
- Remove propeller shaft from pinion drive flange.
- Remove propeller shaft from transmission/transfer case.
- Using tape or a rubber band, wrap the U-Joint bearing caps to ensure bearing caps do not separate from U-Joint.
- Reverse procedure to install, noting the following:
- Align reference marks made during removal.
- Torque yoke retainer bolts to 18 ft. lbs.
Two Piece Driveshaft
- Raise and support vehicle.
- Suppor...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Savana 2500 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 GMC Savana 2500 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 GMC Savana 2500 cars and light trucks from 1990+.
DRIVESHAFT, Replace -> One Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 2000 GMC Savana 2500 6.5 V8 DIESEL
One Piece Driveshaft
- Raise and support vehicle.
- Mark rear universal joint to drive shaft flange.
- Remove retaining bolts and clamps.
- Remove propeller shaft from pinion drive flange.
- Remove propeller shaft from transmission/transfer case.
- Using tape or a rubber band, wrap the U-Joint bearing caps to ensure bearing caps do not separate from U-Joint.
- Reverse procedure to install, noting the following:
- Align reference marks made during removal.
- Torque yoke retainer bolts to 18 ft. lbs.
Two Piece Driveshaft
- Raise and support vehicle.
- Suppor...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Savana 2500 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2000 GMC Savana 2500 vehicle. |
Access the Complete guide! |