Auto Parts Search
We have info for following modifications of 2000 Buick Lesabre
- 2000 Buick Lesabre Custom 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:K
- 2000 Buick Lesabre Limited 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:K
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Buick Lesabre AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Buick Lesabre cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2000 Buick Lesabre Limited 3.8 V6 GAS
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Disconnect outer tie rod end from steering knuckle. Do NOT loosen tie rod end jam nut.
- Insert a drift or punch into brake rotor and against brake caliper in order to prevent wheel hub and bearing from turning.
- Remove and discard wheel drive shaft spindle nut retaining wheel drive shaft to hub.
- Remove stabilizer shaft link.
- Disconnect electrical connector from wheel speed sensor and reposition wiring harness away from ball joint.Be sure that wheel speed sensor wiring harness is repositioned away from ball joint after dis...
CLICK HERE TO GET FULL ACCESS TO 2000 Buick Lesabre DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Buick Lesabre AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Buick Lesabre cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2000 Buick Lesabre Custom 3.8 V6 GAS
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Disconnect outer tie rod end from steering knuckle. Do NOT loosen tie rod end jam nut.
- Insert a drift or punch into brake rotor and against brake caliper in order to prevent wheel hub and bearing from turning.
- Remove and discard wheel drive shaft spindle nut retaining wheel drive shaft to hub.
- Remove stabilizer shaft link.
- Disconnect electrical connector from wheel speed sensor and reposition wiring harness away from ball joint.Be sure that wheel speed sensor wiring harness is repositioned away from ball joint after dis...
CLICK HERE TO GET FULL ACCESS TO 2000 Buick Lesabre DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2000 Buick Lesabre vehicle. |
Access the Complete guide! |