Auto Parts Search
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 BMW 328CI AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 BMW 328CI cars and light trucks sold in the U.S. from 1990+.
BMW -> Tire Pressure Monitoring System (TPMS) Warning Indicator -> 2000-09 3 Series Except X3 -> Less iDrive -> Reset -> With iDrive
Vehicle: 2000 BMW 328CI 2.8 L6 GAS
Reset
The reset procedure needs to be performed anytime the tire pressure is adjusted or the tires are rotated.
Less iDrive
- With vehicle in a stationary position, start the engine.
- Touch turn signal lever up or down until tire pressure warning indicator and RESET appear.
- Press button on the end of the turn signal lever to confirm selection of tire pressure indicator.
- Press button on the end of the turn signal lever for approximately five seconds until a check/tick a...
CLICK HERE TO GET FULL ACCESS TO 2000 BMW 328CI MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 BMW 328CI AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 BMW 328CI cars and light trucks sold in the U.S. from 1990+.
BMW -> Anti-Lock Brake System Warning Lamp ->
Vehicle: 2000 BMW 328CI 2.8 L6 GAS
The Anti-Lock warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. If the ...
CLICK HERE TO GET FULL ACCESS TO 2000 BMW 328CI MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 BMW 328CI AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 BMW 328CI cars and light trucks sold in the U.S. from 1990+.
BMW -> Automatic Transmission Indicator Lamp ->
Vehicle: 2000 BMW 328CI 2.8 L6 GAS
The warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. The warning lamp will also flash when the system ...
CLICK HERE TO GET FULL ACCESS TO 2000 BMW 328CI MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 BMW 328CI AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 BMW 328CI cars and light trucks sold in the U.S. from 1990+.
BMW -> Automatic Stability Control (ASC, ASC+) & Dynamic Stability Control (DSC) Warning Lamp ->
Vehicle: 2000 BMW 328CI 2.8 L6 GAS
The warning lamp is used to warn of a system fault. It will be lit during engine start-up, but should go out when the self-diagnostic system determines that the system is functioning properly. The warning lamp will also flash when the syst...
CLICK HERE TO GET FULL ACCESS TO 2000 BMW 328CI MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 BMW 328CI AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 BMW 328CI cars and light trucks sold in the U.S. from 1990+.
BMW -> Air Bag Warning Lamp ->
Vehicle: 2000 BMW 328CI 2.8 L6 GAS
If the Air Bag warning lamp lights and stays on, diagnosis and ...
CLICK HERE TO GET FULL ACCESS TO 2000 BMW 328CI MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 BMW 328CI AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 BMW 328CI cars and light trucks sold in the U.S. from 1990+.
BMW -> Service Interval Indicator -> 3 Series & M3 -> Interval Indicator -> Less Underhood Diagnostic Connector -> Oil Service -> With Underhood Diagnostic Connector
Vehicle: 2000 BMW 328CI 2.8 L6 GAS
Less Underhood Diagnostic Connector
On these models the SII reset tool cannot be used. Resetting is possible using the instrument cluster trip odometer reset button. Proceed as follows:
- Turn ignition Off.
- Press and hold trip odometer reset button, then turn ignition to "1" (Accessory).
- Keep odometer reset button depressed for approximately five more seconds until any of following words appear in display: "Oil Service" or "Inspection" with "Reset" or "Re."
- On models equipped with high cluster, remaining amount of fuel in liters until next service is displayed should appear.
- On all models, depress ...
CLICK HERE TO GET FULL ACCESS TO 2000 BMW 328CI MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2000 BMW 328CI vehicle. |
Access the Complete guide! |