Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1999 Ford Contour car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1999 Ford Contour automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1999 Ford Contour
- 1999 Ford Contour 2.0 L4 GAS, CC:1989, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:3
- 1999 Ford Contour 2.5 V6 GAS, CC:2450, CID:155, Fuel Injection, Aspiration:155, Engine VIN:, Desg:L
- 1999 Ford Contour 2.0 L4 BI-FUEL, CC:1989, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:Z
- 1999 Ford Contour SVT 2.5 V6 GAS, CC:2450, CID:155, Fuel Injection, Aspiration:155, Engine VIN:, Desg:G
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Ford Contour AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Ford Contour cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Intermediate -> Left -> Right
Vehicle: 1999 Ford Contour 2.0 L4 BI-FUEL
Left
- Use an Allen key to stop piston rod from turning.
- Loosen suspension strut nut five turns.
- Loosen wheel hub retaining nut and wheel nuts.
- Raise and support vehicle.
- Remove wheel.
- Remove wheel hub retaining nut.
- On models with automatic transaxle, drain automatic transmission fluid.
- On all models, remove splash shields.
- Do not damage CV joint boot and wheel speed sensor ring.
- Detach suspension.
- Disconnect stabilizer link end from suspension strut.
- Disconnect tie-rod end.
- Disconnect lower suspension arm from wheel knuckle.
- Disconnect wiring harness bracket from suspension strut.
- To av...
CLICK HERE TO GET FULL ACCESS TO 1999 Ford Contour DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Ford Contour AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Ford Contour cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Intermediate -> Left -> Right
Vehicle: 1999 Ford Contour 2.5 V6 GAS
Left
- Use an Allen key to stop piston rod from turning.
- Loosen suspension strut nut five turns.
- Loosen wheel hub retaining nut and wheel nuts.
- Raise and support vehicle.
- Remove wheel.
- Remove wheel hub retaining nut.
- On models with automatic transaxle, drain automatic transmission fluid.
- On all models, remove splash shields.
- Do not damage CV joint boot and wheel speed sensor ring.
- Detach suspension.
- Disconnect stabilizer link end from suspension strut.
- Disconnect tie-rod end.
- Disconnect lower suspension arm from wheel knuckle.
- Disconnect wiring harness bracket from suspension strut.
- To av...
CLICK HERE TO GET FULL ACCESS TO 1999 Ford Contour DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Ford Contour AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Ford Contour cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Intermediate -> Left -> Right
Vehicle: 1999 Ford Contour 2.0 L4 GAS
Left
- Use an Allen key to stop piston rod from turning.
- Loosen suspension strut nut five turns.
- Loosen wheel hub retaining nut and wheel nuts.
- Raise and support vehicle.
- Remove wheel.
- Remove wheel hub retaining nut.
- On models with automatic transaxle, drain automatic transmission fluid.
- On all models, remove splash shields.
- Do not damage CV joint boot and wheel speed sensor ring.
- Detach suspension.
- Disconnect stabilizer link end from suspension strut.
- Disconnect tie-rod end.
- Disconnect lower suspension arm from wheel knuckle.
- Disconnect wiring harness bracket from suspension strut.
- To av...
CLICK HERE TO GET FULL ACCESS TO 1999 Ford Contour DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Ford Contour AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Ford Contour cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Intermediate -> Left -> Right
Vehicle: 1999 Ford Contour SVT 2.5 V6 GAS
Left
- Use an Allen key to stop piston rod from turning.
- Loosen suspension strut nut five turns.
- Loosen wheel hub retaining nut and wheel nuts.
- Raise and support vehicle.
- Remove wheel.
- Remove wheel hub retaining nut.
- On models with automatic transaxle, drain automatic transmission fluid.
- On all models, remove splash shields.
- Do not damage CV joint boot and wheel speed sensor ring.
- Detach suspension.
- Disconnect stabilizer link end from suspension strut.
- Disconnect tie-rod end.
- Disconnect lower suspension arm from wheel knuckle.
- Disconnect wiring harness bracket from suspension strut.
- To av...
CLICK HERE TO GET FULL ACCESS TO 1999 Ford Contour DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1999 Ford Contour vehicle.
|
| Access the Complete guide! |
