Auto Parts Search
We have info for following modifications of 1999 Acura CL
- 1999 Acura CL 3.0 V6 GAS, CC:2997, Fuel Injection
- 1999 Acura CL 2.3 L4 GAS, CC:2254, Fuel Injection
MAINTENANCE LAMP RESET PROCEDURES FOR 1999 Acura CL AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1999 Acura CL cars and light trucks sold in the U.S. from 1990+.
Acura -> Anti-Lock Brake System (ABS) Warning Lamp -> 1997-99 3.0CL
Vehicle: 1999 Acura CL 3.0 V6 GAS
The ABS warning lamp is used to warn of a system fault. The lamp monitors the condition of the anti-lock brake system. It will be lit during engine start-up, but should go off when the self-diagnostic system determines that the system is operating properly. If the lamp remains lit, a fault in the anti-lock brake system is indicated. Even though the system is operating properly, the indicator may come on if the vehicle goes into a spin, one drive wheel is stuck, only drive wheels rotate, electrical interference is present, or when ABS operates continuously for a long time.
After dia...
CLICK HERE TO GET FULL ACCESS TO 1999 Acura CL MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1999 Acura CL AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1999 Acura CL cars and light trucks sold in the U.S. from 1990+.
Acura -> Check Engine/Malfunction Indicator (MIL)/PGM-FI Warning Indicator Lamp -> 1997-99 3.0CL
Vehicle: 1999 Acura CL 3.0 V6 GAS
The Check Engine/PGM-FI Warning Indicator Lamp should be illuminated for approximately 2 seconds after the ignition switch is placed in the on position as a bulb check. After approximately 2 seconds, the lamp should go off. If the lamp remains lit, a problem in the Programmed Fuel Injection (PGM-FI) system is indicated and a diagnostic trouble code is stored in the Electronic Control Unit (ECU) memory. After diagnosis and repair, clear the ECU memory of diagnostic trouble code...
CLICK HERE TO GET FULL ACCESS TO 1999 Acura CL MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1999 Acura CL AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1999 Acura CL cars and light trucks sold in the U.S. from 1990+.
Acura -> Information System Display ->
Vehicle: 1999 Acura CL 2.3 L4 GAS
This system will indicate driver information and service interval reminder information. The system will normally indicate the clock display until the trip function or system check buttons are depressed. When the trip function button is depressed, the system will indicate fuel remaining, trip meter, present fuel consumption and average fuel consumption. When the system check button is depressed, the display will indicate next service interval, engine oil and filter service interval, oil level, coolant level and washer fluid level. A warning lamp on the instrument cluster will be illuminated whe...
CLICK HERE TO GET FULL ACCESS TO 1999 Acura CL MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1999 Acura CL AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1999 Acura CL cars and light trucks sold in the U.S. from 1990+.
Acura -> Side Air Bag off Lamp ->
Vehicle: 1999 Acura CL 3.0 V6 GAS
This indicator should light for a few seconds when the ignition switch placed in the on position and then go Off. The lamp is used a an alert that the passenger side air bag has been automatically shut off. The passenger side air bag w...
CLICK HERE TO GET FULL ACCESS TO 1999 Acura CL MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1999 Acura CL AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1999 Acura CL cars and light trucks sold in the U.S. from 1990+.
Acura -> Check Engine/Malfunction Indicator (MIL)/PGM-FI Warning Indicator Lamp -> 1998-99 2.3CL
Vehicle: 1999 Acura CL 2.3 L4 GAS
The Check Engine/PGM-FI Warning Indicator Lamp should be illuminated for approximately 2 seconds after the ignition switch is placed in the on position as a bulb check. After approximately 2 seconds, the lamp should go off. If the lamp remains lit, a problem in the Programmed Fuel Injection (PGM-FI) system is indicated and a diagnostic trouble code is stored in the Electronic Control Unit (ECU) memory. After diagnosis and repair, clear the ECU memory of diagnostic trouble cod...
CLICK HERE TO GET FULL ACCESS TO 1999 Acura CL MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1999 Acura CL AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1999 Acura CL cars and light trucks sold in the U.S. from 1990+.
Acura -> Air Bag Warning Lamp ->
Vehicle: 1999 Acura CL 3.0 V6 GAS
The air bag warning lamp will light for a few seconds when the ignition switch is placed in the on position as a bulb check. I...
CLICK HERE TO GET FULL ACCESS TO 1999 Acura CL MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1999 Acura CL vehicle. |
Access the Complete guide! |