Auto Parts Search
We have info for following modifications of 1998 Toyota Camry
- 1998 Toyota Camry 3.0 V6 GAS, CC:2995, Fuel Injection, Engine VIN:, Desg:F
- 1998 Toyota Camry 2.2 L4 GAS, CC:2164, Fuel Injection, Engine VIN:, Desg:G
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Toyota Camry AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Toyota Camry cars and light trucks sold in the U.S. from 1990+.
Toyota -> Low Coolant Lamp ->
Vehicle: 1998 Toyota Camry 3.0 V6 GAS
This lamp will be illuminated when the coolant level in the radiator drops below a pre-determined point. To reset the lamp, bring the c...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Camry MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Toyota Camry AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Toyota Camry cars and light trucks sold in the U.S. from 1990+.
Toyota -> Anti-Lock Brake System (ABS)/Vehicle Stability Control (VSC) System Warning Lamp -> 1997-2001 Camry
Vehicle: 1998 Toyota Camry 3.0 V6 GAS
The anti-lock warning lamp is used to warn of a system fault. The lamp will be lit during engine start-up, but should go out when the self-diagnostic system verifies proper anti-lock operation. If the lamp remains lit, a fault in the anti-lock brake system is indicated. After system diagnosis and repair are complete, the lamp can be reset using the following procedures:
- Place ignition switch in On position.
- On models equipped with Nippondenso systems,connect jumper tool No. 09843-18040, or equivalent, to terminals TC and E1 of diagnostic...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Camry MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Toyota Camry AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Toyota Camry cars and light trucks sold in the U.S. from 1990+.
Toyota -> Automatic Transmission Overdrive Lamp ->
Vehicle: 1998 Toyota Camry 2.2 L4 GAS
The "OD Off" lamp will be illuminated when the ignition switch is in the On position and the Overdrive (OD) switch is in the Off position. When the OD switch is placed in the On position, the "OD Off" lamp should go out. If the lamp flashes when the switch is placed in the On position, a fault has been detected by the electronic control system. After diagnosis and repair are c...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Camry MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Toyota Camry AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Toyota Camry cars and light trucks sold in the U.S. from 1990+.
Toyota -> Anti-Lock Brake System (ABS)/Vehicle Stability Control (VSC) System Warning Lamp -> 1997-2001 Camry
Vehicle: 1998 Toyota Camry 2.2 L4 GAS
The anti-lock warning lamp is used to warn of a system fault. The lamp will be lit during engine start-up, but should go out when the self-diagnostic system verifies proper anti-lock operation. If the lamp remains lit, a fault in the anti-lock brake system is indicated. After system diagnosis and repair are complete, the lamp can be reset using the following procedures:
- Place ignition switch in On position.
- On models equipped with Nippondenso systems,connect jumper tool No. 09843-18040, or equivalent, to terminals TC and E1 of diagnostic...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Camry MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Toyota Camry AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Toyota Camry cars and light trucks sold in the U.S. from 1990+.
Toyota -> Air Bag Warning Lamp -> 1990-2001 Camry
Vehicle: 1998 Toyota Camry 2.2 L4 GAS
The air bag system warning lamp is used to warn of a system fault. The lamp will light during engine start-up, but should go out when the self-diagnostic system determines that no faults are present. If the lamp remains lit, a fault in the air bag system is indicated. The air bag system must be diagnosed and repaired, then the following procedures can be used to reset the warning lamp.
- Connect service wires to check conn...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Camry MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Toyota Camry AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Toyota Camry cars and light trucks sold in the U.S. from 1990+.
Toyota -> Malfunction Indicator Lamp (MIL) ->
Vehicle: 1998 Toyota Camry 2.2 L4 GAS
On some models equipped with OBD II, the MIL will also illuminate if the fuel tank filler cap is not properly tightened. Tighten fuel tank filler cap until it clicks.
The MIL should light when the ignition switch is placed in the On position without starting the engine. When the engine is started, the lamp should go out. If it remains lit, a fault has been detected by the diagnostic system and has logged a diagnostic trouble code. If the fault does not occur again within three trips, the lamp will go out but a diagnostic tro...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Camry MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Toyota Camry vehicle. |
Access the Complete guide! |