Auto Parts Search
We have info for following modifications of 1998 Toyota Camry
- 1998 Toyota Camry 3.0 V6 GAS, CC:2995, Fuel Injection, Engine VIN:, Desg:F
- 1998 Toyota Camry 2.2 L4 GAS, CC:2164, Fuel Injection, Engine VIN:, Desg:G
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Toyota Camry AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Toyota Camry cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 1998 Toyota Camry 2.2 L4 GAS
Front
- Raise and support vehicle, then remove front wheels.
- Remove brake caliper and support with wire, then the rotor, Fig. .
- Place a dial indicator near center of axle hub and check backlash in bearing shaft direction, Fig. . If backlash is greater than .002 inch, replace bearing.
- Place a dial indicator at surface of axle hub outside hub bolt and check hub runout, Fig. . If runout is greater than .002 inch, replace axle hub.
- Install rotor and brake caliper, then remove driveshaft locknut while applying brakes.
- Remove brake caliper and support with wire. Remove rotor.
- Remove AB...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Camry DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Toyota Camry AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Toyota Camry cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 1998 Toyota Camry 3.0 V6 GAS
Front
- Raise and support vehicle, then remove front wheels.
- Remove brake caliper and support with wire, then the rotor, Fig. .
- Place a dial indicator near center of axle hub and check backlash in bearing shaft direction, Fig. . If backlash is greater than .002 inch, replace bearing.
- Place a dial indicator at surface of axle hub outside hub bolt and check hub runout, Fig. . If runout is greater than .002 inch, replace axle hub.
- Install rotor and brake caliper, then remove driveshaft locknut while applying brakes.
- Remove brake caliper and support with wire. Remove rotor.
- Remove AB...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Camry DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Toyota Camry vehicle. |
Access the Complete guide! |