Auto Parts Search
We have info for following modifications of 1998 Toyota Camry
- 1998 Toyota Camry 3.0 V6 GAS, CC:2995, Fuel Injection, Engine VIN:, Desg:F
- 1998 Toyota Camry 2.2 L4 GAS, CC:2164, Fuel Injection, Engine VIN:, Desg:G
BRAKE SERVICE PROCEDURES FOR 1998 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Toyota Camry cars and light trucks from 1990+.
Anti-lock Brakes -> Diagnosis & Testing -> 1997-2000 4RUNNER -> 1997-2000 RAV4 -> 1997-2001 CAMRY W/BOSCH ABS -> 1997-2001 CAMRY W/NIPPONDENSO ABS -> 1997-2001 CAMRY W/TRAC -> 1998-2000 SIENNA LESS VSC -> 2001-02 4RUNNER -> 2001-02 RAV4 -> 2001-02 SIENNA LESS VSC -> 2002 CAMRY W/ABS, BA, TRAC & VSC -> 2002 CAMRY W/BOSCH ABS -> 2002 CAMRY W/DENSO ABS -> 4Runner -> ABS Warning Lamp -> Accessing Diagnostic Trouble Codes -> Anti-Lock Brake System (ABS) -> Avalon -> AVALON LESS TRAC -> AVALON W/TRAC -> Avalon, Camry, Celica, Corolla, Echo, MR2, RAV4, Paseo, Sienna, Supra & Tercel -> Brake Actuator -> Camry -> Camry Solara -> CAMRY SOLARA LESS TRAC -> CAMRY SOLARA W/TRAC -> CELICA -> Clearing Diagnostic Trouble Codes -> Component Testing -> Corolla -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation -> Echo -> HIGHLANDER W/ABS, BA, TRAC & VSC -> HIGHLANDER W/BA & ABS -> Land Cruiser -> LAND CRUISER LESS VSC -> LAND CRUISER w/VSC -> Land Cruiser, Previa, Tacoma, T100 & 4Runner -> Less Toyota Hand Held Tester -> Less Toyota Hand-Held Tester -> MR2 -> PASEO -> Previa -> RAV4 -> Sequoia -> Sequoia & Tundra -> Sienna -> SIENNA W/VSC -> Speed Sensor -> Stop Lamp Switch -> Supra -> SUPRA LESS TRAC -> SUPRA W/TRAC -> System Testing -> T100 -> Tacoma -> Tc Terminal -> Tercel -> Traction Control (TRAC) Warning Lamp -> Ts Terminal -> Tundra -> Vehicle Skid Control (VSC) Warning Lamp -> Wiring Diagrams -> With Toyota Hand Held Tester -> With Toyota Hand-Held Tester
Vehicle: 1998 Toyota Camry 3.0 V6 GAS
Accessing Diagnostic Trouble Codes
Less Toyota Hand-Held Tester
- On Land Cruiser models, ensure center differential is free.
- On all models, turn ignition switch to On position.
- Disconnect short pin from Data Link Connector 1 (DLC1).
- Connect terminals Tc and E1 or CG of DLC1 or DLC3 using tool No. 09843-18020, or equivalent, Figs. through .
- Read and record number of times ANTI-LOCK warning lamp flashes.
- If system is operating properly, (no faults) warning lamp will blink once every .25 seconds.
- Connect actuator check connector and ensure proper operation.
With Toyota Hand-Held Tester
- O...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Toyota Camry cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Tightening Specifications
Vehicle: 1998 Toyota Camry 3.0 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Toyota Camry cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Except Land Cruiser & 4Runner -> Except Sienna -> Land Cruiser & 4Runner -> Master Cylinder -> Models w/Load Sensing Proportioning Valve (LSPV) -> Models w/Proportioning & Bypass Valve (P-BV) -> Proportioning Valve -> Sienna -> Wheel Cylinders
Vehicle: 1998 Toyota Camry 3.0 V6 GAS
Master Cylinder
Except Sienna
- Remove brake fluid with syringe.
- On RAV4 models, remove air cleaner cover with air cleaner hose.
- On all models, label and disconnect brake lines using line wrench 09751-36011, 09023-00100, or equivalent. Cap brake lines from master cylinder.
- Disconnect wire connector from brake pressure switch and then disconnect level warning switch connector, if equipped.
- Remove master cylinder to brake unit attaching nuts, then remove master cylinder, wire clamp, gasket and 3-way union, as needed.
- Reverse procedure to install. Bleed brake system.
Sienna
- Remove air c...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Toyota Camry cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Precautions -> Audio Coded Anti-Theft System
Vehicle: 1998 Toyota Camry 3.0 V6 GAS
Audio Coded Anti-Theft System
Some models are equipped with an audio coded anti-theft system that will disable the radio when the battery cable is disconnected. The system can be identified by the "ANTI-THEFT SYSTEM" on the cassette tape lid. Obtain 3 digit customer code for input. Reset system after service as follows:
- Obtain 3 digit audio anti-theft code.
- Depress 1 (PROG) while depressing righthand side of TUNE SEEK button,- - - will appear in tape operation display.
- To enter the first digit, depress 1 (PROG) button repeatedly until the number of times depressed equals the first digit b...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Toyota Camry cars and light trucks from 1990+.
Disc Brakes -> Rear Disc & Parking Brakes -> Parking Brake Service -> Avalon, Camry, Camry Solara, Celica & Supra -> Land Cruiser & Sequoia -> Shoes, Replace
Vehicle: 1998 Toyota Camry 2.2 L4 GAS
Avalon, Camry, Camry Solara, Celica & Supra
Shoes, Replace
- Raise and support rear of vehicle, then remove tire and wheel assembly.
- Remove rear caliper.
- Remove rotor disc.
- Remove shoe return springs, Figs. and .
- Using strut remover 09717-20010, or equivalent, remove shoe strut and spring.
- Slide front shoe from under shoe hold-down spring, then remove shoe adjusting screw, tension spring and remove shoe.
- Slide rear from shoe hold-down spring, then disconnect parking brake cable from shoe lever.
- Apply non-melting grease on brake backing plate shoe flats, then on shoe sliding surface.
- ...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Toyota Camry cars and light trucks from 1990+.
Power Brake Units -> Troubleshooting
Vehicle: 1998 Toyota Camry 2.2 L4 GAS
Refer to "Hydraulic Brake Systems" ...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Camry BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Toyota Camry vehicle. |
Access the Complete guide! |