Auto Parts Search


      Over 40 million used auto parts online. Shop online for auto and truck parts and save up to 75%

Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!
Help me findSearch
Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 Plymouth Neon car and truck repair procedures including Plymouth engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 1998 Plymouth Neon automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >

We have info for following modifications of 1998 Plymouth Neon

  • 1998 Plymouth Neon 2.0 L4 GAS, CC:1996, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:C
  • 1998 Plymouth Neon 2.0 L4 GAS, CC:1996, CID:122, Fuel Injection, Aspiration:122, Engine VIN:, Desg:Y

BRAKE SERVICE PROCEDURES FOR 1998 Plymouth Neon AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Plymouth Neon cars and light trucks from 1990+.

Hydraulic Brake Systems -> Hydraulic Brake System Controls -> 1998 Breeze, Cirrus, Sebring Convertible & Stratus -> Anti-Lock Brake System -> Description -> Less ABS Except Models w/TLEV -> Less Anti-Lock Brake System -> Neon less ABS, 1997 Breeze, Cirrus, Sebring Convertible & Stratus -> Neon, 1997 Breeze, Cirrus, Sebring Convertible, & Stratus -> Testing -> Type 1 Proportioning Valve -> Type 2 Proportioning Valves -> Type 3 Proportioning Valves -> With ABS & Non-ABS w/TLEV
Vehicle: 1998 Plymouth Neon 2.0 L4 GAS

Type 1 Proportioning Valve

Testing
  • Install suitable pressure gauges, one each on input side and output side of proportioning valve as shown in Fig. .
  • Bleed brake line and pressure gauge, then gradually depress brake pedal and observe gauge readings. Refer to "Hydraulic Brake Controls Specifications" chart.
  • Observe left and right output pressures.
  • Pressure difference between left and right should not be greater than 57 psi.
  • If gauge readings are not within specifications, replace proportioning valve.

Type 2 Proportioning Valves

Description

This system uses proportioning val...

CLICK HERE TO GET FULL ACCESS TO 1998 Plymouth Neon BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1998 Plymouth Neon AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Plymouth Neon cars and light trucks from 1990+.

Disc Brakes -> Type 4-Kelsey-Hayes Dual Pin Floating Caliper Disc Brake, Front -> Troubleshooting -> Lateral Runout Inspection -> Parallelism Inspection
Vehicle: 1998 Plymouth Neon 2.0 L4 GAS

Refer to Fig. for system troubleshooting.

Lateral Runout Inspection

Refer to "Disc Brake Specifications" for runout specifications.

  • Raise and support vehicle, then remove wheels.
  • If applicable, ensure wheel bearings are properly adjusted.
  • Using suitable spacers install lug nuts or bolts, then tighten to specifications.
  • Mount a dial indicator to vehicle, then position dial indicator plunger so it contacts the rotor at a point one inch from the outer edge.
  • Rotate the rotor and note the dial indicator readings. Perf...

CLICK HERE TO GET FULL ACCESS TO 1998 Plymouth Neon BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1998 Plymouth Neon AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Plymouth Neon cars and light trucks from 1990+.

Anti-Lock Brakes -> Type 4-Teves Mark 20 Anti-Lock Braking System -> Troubleshooting
Vehicle: 1998 Plymouth Neon 2.0 L4 GAS

Refer to flowcharts under "Diagnosis & T... "

CLICK HERE TO GET FULL ACCESS TO 1998 Plymouth Neon BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1998 Plymouth Neon AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Plymouth Neon cars and light trucks from 1990+.

Disc Brakes -> Type 5-Kelsey-Hayes Dual Pin Floating Caliper Disc Brake, Rear -> Troubleshooting -> Lateral Runout Inspection -> Parallelism Inspection
Vehicle: 1998 Plymouth Neon 2.0 L4 GAS

Refer to "Type 6-Kelsey-Hayes Dual Pin Floating Caliper Disc Brake, Front" for system troubleshooting.

Lateral Runout Inspection

Refer to "Disc Brake Specifications" for runout specifications.

  • Raise and support vehicle, then remove wheels.
  • If applicable, ensure wheel bearings are properly adjusted.
  • Using suitable spacers install lug nuts or bolts, then tighten to specifications.
  • Mount a dial indicator to vehicle, then position dial indicator plunger so it contacts the rotor at a point one inch from the outer edge.
  • Rotate the rotor and note the...

CLICK HERE TO GET FULL ACCESS TO 1998 Plymouth Neon BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1998 Plymouth Neon AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Plymouth Neon cars and light trucks from 1990+.

Anti-Lock Brakes -> Type 4-Teves Mark 20 Anti-Lock Braking System -> System Service -> Brake System Bleed -> Breeze, Cirrus, Sebring Convertible & Stratus -> Component Replacement -> Concorde, Intrepid & LHS -> Controller Anti-Lock Brake (CAB) -> Except Neon -> Front -> Integrated Control Unit -> Neon -> Rear -> Wheel Speed Sensor
Vehicle: 1998 Plymouth Neon 2.0 L4 GAS

Brake System Bleed

The TEVES Mark 20 anti-lock brake system must be bled as two independent braking systems. The non ABS portion of the brake system should be bled the same as any non ABS system. The ABS portion of the system requires the use of a DRB, or equivalent, scan tool.

  • To bleed the non ABS portion of the system, refer to " Hydraulic Brakes".
  • To bleed the ABS portion of the system, connect DRB scan tool to vehicle diagnostics connector, located under the lefthand side of instrument panel.
  • Set can tool to "Bleed ABS" routine.
  • Apply brake pedal firmly and initiate the "Bleed ABS" cycl...

CLICK HERE TO GET FULL ACCESS TO 1998 Plymouth Neon BRAKE SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1998 Plymouth Neon AUTOMOBILES

Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Plymouth Neon cars and light trucks from 1990+.

Drum Brakes -> Type 1: Kelsey-Hayes & Varga Leading-Trailing Drum Brakes -> Adjustments -> Breeze, Cirrus & Stratus -> Concord, Intrepid, LHS, Neon, Sebring Convertible & Vision -> Except Breeze, Cirrus & Stratus -> Parking Brake -> Service Brake
Vehicle: 1998 Plymouth Neon 2.0 L4 GAS

Service Brake
Breeze, Cirrus & Stratus

These vehicles are equipped with a fully automatic adjustment mechanism. In the event of brake shoe replacement the following initial adjustment procedure must be completed prior to driving the vehicle.

  • Ensure parking brake lever is fully released.
  • Depress brake pedal as far as possible 2-3 times. This will cause automatic adjuster to correctly adjust rear brakes.
  • Apply and release park brake lever one time after service brakes have been adjusted.
Except Breeze, Cirrus & Stratus
  • Raise and support vehicle.
  • Remove brake adjusting hole plug from rear brak...

CLICK HERE TO GET FULL ACCESS TO 1998 Plymouth Neon BRAKE SERVICE PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

Click here to view more details about 1997 Plymouth Neon Hood1997 Plymouth Neon Hood, With windshield washer nozzle holes; A high quality, direct fit OE replacement hood..

Source: Auto Body Parts Store

$115.50

Click here to view more details1996 Plymouth Neon Oil Pressure Switch, 3/8 in. x 18 NPT thread size; Pin type; 1-prong male terminal; A high quality, direct fit OE replacement oil pressure switch; With 2 years limited Trustbuilt warranty..

Source: Auto Body Parts Store

$14.96

Click here to view more details about 2001 Plymouth Neon 16" x 6" Alloy Wheel2001 Plymouth Neon 16" x 6" Alloy Wheel, Alloy Wheel; 16 X 6; 20 Spokes; 5 Lug; 100MM BP; Sparkle Silver, , .

Source: Wheels / Rims, Mirrors & Lights Store

$120.50

Click here to view more details1995 Plymouth Neon Highline L4, 2 L, 1996 CC, 122 CID Rebuilt Engine, Warranty: 3-Year/100,000 Mile, .

Source: Rebuilt Engines Store

$2,241.00

Click here to view more details2000 Plymouth Neon Used A/C Compressor, 2.0, AUTO, FWD, Very Good.

Source: Used Auto Parts Store

$132.00

Click here to view more details2000 Plymouth Neon Used Ignition Switch W/Key, Very Good.

Source: Used Auto Parts Store

$65.00
More parts
Help me findSearch
Auto Repair Quick Search
Help me find
Search DIY repair manuals by VIN...
Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

Find out what info we have for your vehicle

Get the Complete Technical Service Bulletins!
Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Plymouth Neon vehicle.
Access the Complete guide!
Need To Fix Your Car or Truck?
Save Money With Free Car Insurance Quote
FREE car insurance quote
Enter Zip Code:
Auto Repair Quick Search
Help me find