Auto Parts Search
We have info for following modifications of 1998 Ford Explorer
- 1998 Ford Explorer 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:X
- 1998 Ford Explorer 5.0 V8 GAS, CID:302, Fuel Injection, Aspiration:302, Engine VIN:, Desg:P
- 1998 Ford Explorer 4.0 V6 GAS, CID:245, Fuel Injection, Aspiration:245, Engine VIN:, Desg:E
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Ford Explorer AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Ford Explorer cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Trucks -> Charge System Warning Indicator ->
Vehicle: 1998 Ford Explorer 4.0 V6 GAS
The charge system warning indicator lamps are used to warn of no alternator output. When ignition switch contacts are closed, current flows through charge indicator and pa...
CLICK HERE TO GET FULL ACCESS TO 1998 Ford Explorer MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Ford Explorer AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Ford Explorer cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Trucks -> Emission Maintenance Reminder Indicator ->
Vehicle: 1998 Ford Explorer 4.0 V6 GAS
This lamp should light after approximately 60,000 miles of operation, Fig. . The amber lens lamp is located on the instrument panel and has the word Emissions, Emiss or EGR printed on it. After performing the required emission control maintenance, the module must be replaced or reset, depending on type of module used. On module equipped with reset feature, reset the module as follows:
- Turn ignition Off.
- On Aerostar models, the module is located under the instrument panel near the bulkhead connector.
- On Bronco, Explorer and F-Series, the module is attached to the instrument cluster to the left of ...
CLICK HERE TO GET FULL ACCESS TO 1998 Ford Explorer MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Ford Explorer AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Ford Explorer cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Trucks -> Low Oil Level Warning Indicator ->
Vehicle: 1998 Ford Explorer 5.0 V8 GAS
This system is used to indicate a low engine oil level condition. The lamp should light during engine starting. If oil level is sufficient, the lamp should go off when engine is operating. If oil level is low the...
CLICK HERE TO GET FULL ACCESS TO 1998 Ford Explorer MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Ford Explorer AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Ford Explorer cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Trucks -> Check Fuel Cap Lamp ->
Vehicle: 1998 Ford Explorer 4.0 V6 GAS
The Check Fuel Cap Lamp will illuminate momentarily when the ignition switch is placed in the On position as a bulb check. If the lamp remains...
CLICK HERE TO GET FULL ACCESS TO 1998 Ford Explorer MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Ford Explorer AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Ford Explorer cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Trucks -> Anti-Lock Or Rear Anti-Lock Brake System Warning ->
Vehicle: 1998 Ford Explorer 4.0 V6 GAS
Red and yellow indicator lamps are used to warn of system faults. The red lamp warns of such faults as low brake fluid level, parking brake On, system pressure differential and other system faults. The red indicator lamp will light for approximately two seconds during engine starting and should go off, unless parking brake is applied or a problem in the brake system exist. The red indicator lamp should reset after repairs to system have ...
CLICK HERE TO GET FULL ACCESS TO 1998 Ford Explorer MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Ford Explorer AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1998 Ford Explorer cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Trucks -> Severity Indicator ->
Vehicle: 1998 Ford Explorer 4.0 V6 GAS
This indicator will display the severity color of RED when low oil pressure, charging system malfunction, engine coolant overheating or door ajar problems ar...
CLICK HERE TO GET FULL ACCESS TO 1998 Ford Explorer MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Ford Explorer vehicle. |
Access the Complete guide! |