Auto Parts Search


      Over 40 million used auto parts online. Shop online for auto and truck parts and save up to 75%

1998 Buick Park Avenue CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Buick REPAIR SHOPS DON'T WANT YOU TO KNOW

Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!

    Automotive Domain Names

    Help me findSearch

    Select Section

    Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 Buick Park Avenue car and truck repair procedures including Buick engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your Buick Park Avenue automobile. Try the Automotix DIY solution today!
    DIY REPAIR SAMPLES > CONTINUE EXPLORING >
    Using the Automotix DIY repair procedures will save you hundreds and even thousands of dollars! In addition, it will save you hours of touring the city searching for Buick mechanics you can trust. The Automotix DIY solution is particularly affordable. A full access to the entire DIY repair procedures and diagrams for your 1998 Buick Park Avenue vehicle will cost less than a single gallon of gas. Here are some of the DIY repair tips and procedures you will find here:

    A/C & HEATER SERVICE PROCEDURES FOR 1998 Buick Park Avenue AUTOMOBILES

    Component Replacement & Adjustment -> Bonneville, Eighty Eight, LeSabre, LSS, Park Avenue & Regency -> Programmer, Replace -> Bonneville -> LeSabre, LSS, Regency & 88
    Vehicle: 1998 Buick Park Avenue Ultra 3.8 V6 GAS

    Bonneville
    • Remove right sound insulator from under instrument panel.
    • Disconnect vacuum connectors from programmer.
    • Disconnect programmer electrical connector.
    • Remove rod from temperature valve link.
    • Remove programmer attaching screws, then disconnect actuator connector from temperature valve.
    • Remove programmer from HVAC module.
    • Reverse procedure to install. Adjust temperature valve link as outline...

    CLICK HERE TO GET FULL ACCESS TO 1998 Buick Park Avenue A/C & HEATER SERVICE PROCEDURES

    BRAKE SERVICE PROCEDURES FOR 1998 Buick Park Avenue AUTOMOBILES

    Power Brake Units -> Adjustments -> AC-Delco Single Diaphragm Type -> AC-Delco Tandem Diaphragm Type -> Air Method -> Brake Pedal -> Gauge Method -> Pushrod -> Toyota/GM Single Diaphragm Type
    Vehicle: 1998 Buick Park Avenue 3.8 V6 GAS

    Brake Pedal
    Toyota/GM Single Diaphragm Type
    • With engine running and brake pedal in rest position, measure distance between face of pedal and floor mat.
    • If distance is not 5.79-6.18 inches, adjust pedal height as follows:
      • Remove left lower instrument panel trim section and air duct.
      • Loosen stop lamp switch sufficiently to gain clearance for pedal adjustment.
      • Loosen locknut and rotate pedal pushrod as needed to obtain specified pedal height, then tighten locknut.
      • Adjust position of brake light switch so that plunger lightly contacts pedal stopper and brake lamps are off when pedal is release...

    CLICK HERE TO GET FULL ACCESS TO 1998 Buick Park Avenue BRAKE SERVICE PROCEDURES

    FUEL FILTER REPLACEMENT PROCEDURES FOR 1998 Buick Park Avenue AUTOMOBILES

    General Motors Corp./Saturn Passenger Cars -> Fuel Pressure Relief -> Except Aveo, LaCrosse, LeMans (1988-93), Malibu & Malibu Maxx (2004-05), Metro, Nova, Prizm, Spectrum & Storm -> Engine Fuel Pressure Service Port -> Engines Less Fuel Pressure Service Port
    Vehicle: 1998 Buick Park Avenue Ultra 3.8 V6 GAS

    Do not smoke or allow an open flame of any type when working on or near any fuel system related components. The highly flammable vapor mixtures may ignite, resulting in serious personal injury.

    Prior to disconnecting fuel lines, the fuel system pressure must be relieved to prevent accidental spray of fuel.

    After the battery has been disconnected and reconnected, some abnormal driveability symptoms may occur. The vehicle may need to be driven while the vehicle relearns its adaptive strateg...

    CLICK HERE TO GET FULL ACCESS TO 1998 Buick Park Avenue FUEL FILTER REPLACEMENT PROCEDURES

    DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Buick Park Avenue AUTOMOBILES

    CV AXLE SHAFT, Replace
    Vehicle: 1998 Buick Park Avenue Ultra 3.8 V6 GAS

    • Raise and support vehicle, then remove tire and wheel assembly.
    • Install a brass drift or a screwdriver to prevent rotor from turning.
    • Remove axle nut and washer.
    • Remove ball joint pinch bolt, then using a suitable pry bar, separate ball joint from knuckle.
    • Remove drive axle from hub and bearing assembly using front hub spindle...

    CLICK HERE TO GET FULL ACCESS TO 1998 Buick Park Avenue DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

    TIRE PRESSURE MONITORING SYSTEM PROCEDURES FOR 1998 Buick Park Avenue AUTOMOBILES

    Component Locations
    Vehicle: 1998 Buick Park Avenue 3.8 V6 GAS

    Refer to F...

    CLICK HERE TO GET FULL ACCESS TO 1998 Buick Park Avenue TIRE PRESSURE MONITORING SYSTEM PROCEDURES

    STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1998 Buick Park Avenue AUTOMOBILES

    Starter, Replace
    Vehicle: 1998 Buick Park Avenue Ultra 3.8 V6 GAS

    When removing starter, note if any shims are used between starter and mounting surface. If shims are found, reinstall in original locations.

    If starter is noisy during cranking, remove one .015 inch double shim or add one .015 inch single shim to outer bolt. If starter makes a high pitched whine after engine...

    CLICK HERE TO GET FULL ACCESS TO 1998 Buick Park Avenue STARTER & ALTERNATOR REPLACEMENT PROCEDURES

    CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 1998 Buick Park Avenue AUTOMOBILES

    Cabin Air Filter Service -> General Motors Corp./Saturn -> 1998-99 Park Avenue
    Vehicle: 1998 Buick Park Avenue Ultra 3.8 V6 GAS

    Under normal operating conditions the cabin air filter should be replaced every 15,000 miles. In dusty areas change the cabin air filter more often.

    • Place the ignition switch in the Off position, then remove the SIR (Supplemental Inflatable Restraint) fuse from the underhood fuse panel.
    • Remove the lefthand sound insulator fasteners, Fig. . Note the location of the lefthand sound insulator fasteners so they can be installed at the same positions. Improper installation of the fasteners may result in brake or accelerator pedal binding. SIR system wiring and components are l...

    CLICK HERE TO GET FULL ACCESS TO 1998 Buick Park Avenue CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES

    MAINTENANCE LAMP RESET PROCEDURES FOR 1998 Buick Park Avenue AUTOMOBILES

    General Motors Corp./Saturn Cars -> Check Gauge Warning Lamp ->
    Vehicle: 1998 Buick Park Avenue 3.8 V6 GAS

    The Check Gauge warning lamp will light to warn the driver to inspect the oil pressure gauge, engine coolant temperature ga...

    CLICK HERE TO GET FULL ACCESS TO 1998 Buick Park Avenue MAINTENANCE LAMP RESET PROCEDURES

    RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1998 Buick Park Avenue AUTOMOBILES

    Radiator, Replace
    Vehicle: 1998 Buick Park Avenue 3.8 V6 GAS

    • Drain engine coolant.
    • Remove upper fan mounting bolts.
    • Remove upper radiator panel.
    • Remove coolant hoses from radiator and coolant recovery tank hose from radiator neck.
    • Dis...

    CLICK HERE TO GET FULL ACCESS TO 1998 Buick Park Avenue RADIATOR & HOSE REPLACEMENT PROCEDURES

    SERPENTINE BELT SERVICE PROCEDURES FOR 1998 Buick Park Avenue AUTOMOBILES

    Serpentine Drive Belt, Replace
    Vehicle: 1998 Buick Park Avenue Ultra 3.8 V6 GAS

    • Remove the battery.
    • Rotate the tensioner counterclockwise to remove the drive belt.
    • Remove the supercharger belt from...

    CLICK HERE TO GET FULL ACCESS TO 1998 Buick Park Avenue SERPENTINE BELT SERVICE PROCEDURES

    COMPONENT LOCATION DIAGRAMS FOR 1998 Buick Park Avenue AUTOMOBILES

    Component location diagrams for most 1998 Buick Park Avenue cars and light trucks sold in the U.S. from 1990+.

    LH Side Of Transaxle Diagram for 1998 Buick Park Avenue Ultra 3.8 V6 GASLH Side Of Transaxle Diagram for 1998 Buick Park Avenue Ultra 3.8 V6 GAS

    Components on diagram:
  • Intake Air Temperature Sensor
  • Park/Neutral Position Switch
  • Connector C-100
  • RH Side Of I/P Diagram for 1998 Buick Park Avenue  3.8 V6 GASRH Side Of I/P Diagram for 1998 Buick Park Avenue 3.8 V6 GAS

    Components on diagram:
  • Air Inlet Actuator
  • Passenger Air Mix Actuator
  • Connector C-205
  • HVAC Harness
  • CLICK HERE TO GET FULL ACCESS TO 1998 Buick Park Avenue PARTS/COMPONENTS LOCATION DIAGRAMS!

    WIRING DIAGRAMS FOR 1998 Buick Park Avenue AUTOMOBILES

    OEM drawn wiring diagrams for most 1998 Buick Park Avenue cars and light trucks sold in the U.S.

    1998 Buick Park Avenue Ultra 3.8 V6 GAS Wiring Diagram1998 Buick Park Avenue Ultra 3.8 V6 GAS Wiring Diagram

    Components on diagram:
  • Data Link Connector
  • Shift Interlock Solenoid
  • Body Control Module
  • Lighting Control Module
  • Stoplamp/BTSI Switch
  • 1998 Buick Park Avenue  3.8 V6 GAS Wiring Diagram1998 Buick Park Avenue 3.8 V6 GAS Wiring Diagram

    Components on diagram:
  • Head Up Display Control Switch
  • CLICK HERE TO GET FULL ACCESS TO 1998 Buick Park Avenue WIRING DIAGRAMS!

    TECHNICAL SERVICE BULLETINS FOR 1998 Buick Park Avenue AUTOMOBILES

    OEM TSB listings for most 1998 Buick Park Avenue cars and light trucks sold in the U.S. from 1985+.

    Document: Revised General Motors New Vehicle Tire Warranty Program
    Vehicle: 1998 Buick Park Avenue 3.8 V6 GAS

    Auto Systems:
  • Labor Times, Manuals, Warranty, Aids
  • Wheels, Tires, Wheel Bearings, Seals, Hubs
  • Document: New Website for AFIT, TPM, and VDR Updates
    Vehicle: 1998 Buick Park Avenue 3.8 V6 GAS

    Auto Systems:
  • Labor Times, Manuals, Warranty, Aids
  • CLICK HERE TO GET FULL ACCESS TO 1998 Buick Park Avenue TECHNICAL SERVICE BULLETINS!

    COMPONENT/PARTS SPECIFICATIONS FOR 1998 Buick Park Avenue AUTOMOBILES

    BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 1998 Buick Park Avenue cars and light trucks sold in the U.S. and Canada from 1970+.

    • Brake caliper mounting bolt torque
    • Brake drum runout, machining, & discard specs
    • Minimum brake lining thickness.
    • Brake rotor runout, parallelism, machining, discard, & finish specs

    A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 1998 Buick Park Avenue cars and light trucks sold in the U.S. and Canada from 1980+.

    • Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap

    COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.

    PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules

    QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 1998 Buick Park Avenue cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.

    • Automatic transmission/transaxles capacities, lubricant recommendations
    • Differential/final drive capacities, lube recommendations, grades, & viscosities
    • Final drive fill & drain plug torques
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
    • Severe service maintenance & interval recommendations
    • Tire sizes, wheel nut/bolt torque, pressures & rim sizes
    • Transfer case capacities, lube recommendations, grades, & viscosities

    TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 1998 Buick Park Avenue cars and light trucks sold in the U.S. and Canada from 1980+

    • Airflow sensor electrical specifications
    • Tensioning specifications for systems with automatic tensioners
    • Barometric pressure sensor specs
    • Battery group number and cranking performance
    • Crankshaft & camshaft position sensor resistance
    • Engine compression pressures
    • Coolant temperature sensor specs
    • Computer advance.
    • Diesel fuel temperature sensor resistance.
    • Distributor advance specifications
    • Ignition pickup coil resistance
    • Exhaust gas recirculation temperature sensor resistance
    • Engine fastener torque values
    • Firing order diagrams
    • Fuel system pressures
    • Generator (alternator) specs
    • Intake air temperature sensor specs
    • Ignition coil specifications
    • Fuel injector resistance
    • Engine idle speeds
    • Knock sensor resistance
    • Manifold absolute pressure sensor specs
    • Mixture control solenoid resistance
    • Voltage regulator specs
    • Spark plug applications & gaps
    • Starter motor electrical specs.
    • Tensioning specifications for systems without automatic tensioners
    • Throttle body temperature sensor resistance
    • Ignition timing in degrees at rpm
    • Transmission oil temperature sensor resistance
    • Throttle position sensor specs
    • Vacuum sensor valve specs

    CLICK HERE TO GET FULL ACCESS TO 1998 Buick Park Avenue SPECIFICATIONS DATA!

    Shop online for auto body parts, engines, wheels, lights...

    Click here to view more details about 2005 Buick Park Avenue Bumper Trim, Front, Driver Side2005 Buick Park Avenue Bumper Trim, Front, Driver Side, Made from tough impact-resistant plastic for maximum durability and tensile strength; Built to exact OE quality, fit, and finish..

    Source: Auto Body Parts Store

    $48.31

    Click here to view more details1995 Buick Park Avenue Brake Light Switch, Blade type; 2-prong and 4-prong male terminals; A high quality, direct fit OE replacement brake light switch; With 2 years limited Trustbuilt warranty..

    Source: Auto Body Parts Store

    $9.21

    Click here to view more details about 2004 Buick Park Avenue 16" x 6.5" Alloy Wheel2004 Buick Park Avenue 16" x 6.5" Alloy Wheel, Alloy Wheel; 16 X 6.5; 9 Spokes; 5 Lug; 115MM BP; Original Equipment Chrome, , .

    Source: Wheels / Rims, Mirrors & Lights Store

    $282.50

    Click here to view more details2002 Buick Park Avenue Ultra V6, 3.8 L, 231 CID Rebuilt Engine, Warranty: 3-Year/100,000 Mile, .

    Source: Rebuilt Engines Store

    $1,842.00

    Click here to view more details2000 Buick Park Avenue Used Air Injection Pump, (Calif), Very Good.

    Source: Used Auto Parts Store

    $149.00

    Click here to view more details1996 Buick Park Avenue Used A/C Compressor, 3.8, AUTO, FWD, Very Good.

    Source: Used Auto Parts Store

    $103.00
    More parts
    Help me findSearch
    Auto Repair Quick Search
    Help me find
    Search DIY repair manuals by VIN...
    Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

    Find out what info we have for your vehicle

    Get the Complete Technical Service Bulletins!
    Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Buick Park Avenue vehicle.
    Access the Complete guide!
    Need To Fix Your Car or Truck?
    Save Money With Free Car Insurance Quote
    FREE car insurance quote
    Enter Zip Code:
    GOT A WEBSITE?Make money with Automotix

    Make money with Automotix Partner Program.

    Learn more

    Auto Repair Quick Search
    Help me find