Auto Parts Search
We have info for following modifications of 1997 Honda Odyssey
- 1997 Honda Odyssey EX 2.2 L4 GAS, CC:2156, Fuel Injection
- 1997 Honda Odyssey LX 2.2 L4 GAS, CC:2156, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Honda Odyssey AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Honda Odyssey cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 1997 Honda Odyssey LX 2.2 L4 GAS
Front
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Drain transmission fluid and reinstall drain plug using a new washer. Its not required to drain transmission fluid if lefthand driveshaft is removed.
- Lift up locking tab on spindle nut then remove nut.
- Remove self-locking nut and flange bolt.
- Remove bolts securing dampner fork.
- Remove cotter pin from lower arm ball joint castle nut and remove nut.
- Install a 12 mm hex nut on ball joint. Ensure that hex nut is flush with ball joint pi...
CLICK HERE TO GET FULL ACCESS TO 1997 Honda Odyssey DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Honda Odyssey AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Honda Odyssey cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 1997 Honda Odyssey EX 2.2 L4 GAS
Front
- Loosen wheel nuts slightly.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Drain transmission fluid and reinstall drain plug using a new washer. Its not required to drain transmission fluid if lefthand driveshaft is removed.
- Lift up locking tab on spindle nut then remove nut.
- Remove self-locking nut and flange bolt.
- Remove bolts securing dampner fork.
- Remove cotter pin from lower arm ball joint castle nut and remove nut.
- Install a 12 mm hex nut on ball joint. Ensure that hex nut is flush with ball joint pi...
CLICK HERE TO GET FULL ACCESS TO 1997 Honda Odyssey DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1997 Honda Odyssey vehicle. |
Access the Complete guide! |