Auto Parts Search
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Audi A6 Quattro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Audi A6 Quattro cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1997 Audi A6 Quattro 2.8 V6 GAS
- Raise and support vehicle.
- Remove exhaust pipe with three way catalytic converters.
- Remove front crossmember and heat shield.
- Remove complete exhaust system.
- Remove crossmember below driveshaft.
- If there are no markings, mark position of flange relative to rear final drive with paint.
- Loosen driveshaft mounting bolts at rear final drive and at transmission.
- Loosen center bearing-to-body mounting bolts.
- Attach a suitable alignment fixture and tighten plastic nuts.
- Remov...
CLICK HERE TO GET FULL ACCESS TO 1997 Audi A6 Quattro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Audi A6 Quattro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Audi A6 Quattro cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1997 Audi A6 Quattro 2.8 V6 GAS
- Raise and support vehicle.
- Remove wheel cover and remove drive axle bolt in hub.
- Pull speed sensor slightly out of housing, then remove drive axle flange to transaxle mounting bolts.
- Press drive axle upward toward front o...
CLICK HERE TO GET FULL ACCESS TO 1997 Audi A6 Quattro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1997 Audi A6 Quattro vehicle. |
Access the Complete guide! |