Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1996 Toyota Land Cruiser car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1996 Toyota Land Cruiser automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 1996 Toyota Land Cruiser AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Toyota Land Cruiser cars and light trucks from 1990+.
DISC BRAKES -> Rear Disc & Parking Brakes -> BRAKE PAD SERVICE -> 1995-96 Avalon & Supra -> Camry, Previa & 1993-94 Supra -> Land Cruiser -> MR2
Vehicle: 1996 Toyota Land Cruiser 4.5 L6 GAS
1995-96 Avalon & Supra
- Raise and support rear of vehicle, then remove tire and wheel assembly.
- Remove caliper attaching bolts, then the caliper, Figs. and . Do not allow caliper to hang unsupported or damage to the brake hose may occur.
- Remove pads and anti-squeal shim(s).
- Remove anti-rattle springs, pad guide plates and support plate.
- Reverse procedure to install. Tighten caliper attaching bolts to specifications.
Camry, Previa & 1993-94 Supra
- Raise and support rear of vehicle, then remove tire and wheel assembly.
- Remove caliper attaching bolts, then the caliper, Fig. . Do not allow...
CLICK HERE TO GET FULL ACCESS TO 1996 Toyota Land Cruiser BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Toyota Land Cruiser AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Toyota Land Cruiser cars and light trucks from 1990+.
Anti-lock Brakes -> Diagnosis & Testing -> ABS Warning Light -> Accessing Diagnostic Trouble Codes -> Avalon, Camry, Tacoma, Tercel, Supra, 1993-95 Corolla & 1994-95 Celica -> Circuit Tests -> Clearing Diagnostic Trouble Codes -> Diagnostic System Inspection -> Diagnostic Tests -> Less Super Monitor -> Self Diagnostic System -> Stop Light Switch -> Tc Terminal -> Ts Terminal -> Wiring Diagrams -> With Super Monitor -> With Toyota Hand-Held Tester
Vehicle: 1996 Toyota Land Cruiser 4.5 L6 GAS
Wiring Diagrams
[[table data]]Self Diagnostic System
The anti-lock brake system is equipped with a self diagnosis system capable of reading and storing specific diagnostic trouble codes, which may indicate component failure or system malfunction.
Diagnostic System Inspection
- Ensure battery voltage is about 12 volts.
- Turn ignition switch on.
- Ensure "ANTI-LOCK" warning light turns On for three seconds. If not, inspect and repair or replace fuse, bulb or wire harness.
Accessing Diagnostic Trouble Codes
Less Super Monitor
- On Land Cruiser models, ensure center differential is free.
- On all ...
CLICK HERE TO GET FULL ACCESS TO 1996 Toyota Land Cruiser BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Toyota Land Cruiser AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Toyota Land Cruiser cars and light trucks from 1990+.
DISC BRAKES -> Rear Disc & Parking Brakes -> CALIPER SERVICE -> Avalon & 1995-96 Supra -> Caliper, Replace -> Camry, Previa & 1993-94 Supra -> Land Cruiser -> MR2 -> Overhaul
Vehicle: 1996 Toyota Land Cruiser 4.5 L6 GAS
Avalon & 1995-96 Supra
Caliper, Replace
- Raise and support rear of vehicle, then remove tire and wheel assembly.
- Disconnect brake hose from brake tube and caliper using a suitable tool.
- Remove caliper attaching bolts, then the caliper, Figs. and .
- Remove anti-squeal shim(s), brake pad, anti-rattle spring, pad guide plate and pad support plate.
- Reverse procedure to install, then bleed brake system.
Overhaul
- Remove sliding bushing and boot, Figs. and .
- Remove main pin boot using a suitable chisel.
- Remove piston using compressed air. When using air pressure to remove caliper p...
CLICK HERE TO GET FULL ACCESS TO 1996 Toyota Land Cruiser BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Toyota Land Cruiser AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Toyota Land Cruiser cars and light trucks from 1990+.
DRUM BRAKES -> TIGHTENING SPECIFICATIONS
Vehicle: 1996 Toyota Land Cruiser 4.5 L6 GAS
CLICK HERE TO GET FULL ACCESS TO 1996 Toyota Land Cruiser BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Toyota Land Cruiser AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Toyota Land Cruiser cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEMS -> COMPONENT REPLACEMENT -> Except Land Cruiser, Pickup & 4Runner -> Land Cruiser, Pickup & 4Runner -> Master Cylinder -> Models w/Load Sensing Proportioning Valve (LSPV) -> Models w/Proportioning & By-Pass Valve (P-BV) -> Proportioning Valve -> Wheel Cylinders
Vehicle: 1996 Toyota Land Cruiser 4.5 L6 GAS
Master Cylinder
- On MR2, remove luggage compartment trim cover by removing two clips after disengaging inner part of clip.
- On all models, remove brake fluid with syringe.
- On RAV4, remove air cleaner cover with air cleaner hose.
- On all models, label and disconnect brake lines using line wrench 09751-36011, 09023-00100, or equivalent. Then cap brake lines from master cylinder.
- Disconnect wire connector from brake pressure switch and then disconnect level warning switch connector, if equipped.
- Remove master cylinder to brake unit attaching nuts, then remo...
CLICK HERE TO GET FULL ACCESS TO 1996 Toyota Land Cruiser BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1996 Toyota Land Cruiser AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1996 Toyota Land Cruiser cars and light trucks from 1990+.
DISC BRAKES -> Rear Disc & Parking Brakes -> PARKING BRAKE SERVICE -> Avalon, Previa, Supra, Camry & Celica -> Land Cruiser -> Shoes, Replace
Vehicle: 1996 Toyota Land Cruiser 4.5 L6 GAS
Avalon, Previa, Supra, Camry & Celica
Shoes, Replace
- Raise and support rear of vehicle, then remove tire and wheel assembly.
- Remove rear caliper, refer to "Caliper, Replace."
- Remove rotor disc.
- Remove shoe return springs, Figs. and .
- Using strut remover 09717-20010, or equivalent, remove shoe strut and spring.
- Slide front shoe from under shoe hold-down spring, then remove shoe adjusting screw, tension spring and remove shoe.
- Slide rear from shoe hold-down spring, then disconnect parking brake cable from shoe lever.
- Apply non-melting grease on brake backing plate shoe f...
CLICK HERE TO GET FULL ACCESS TO 1996 Toyota Land Cruiser BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1996 Toyota Land Cruiser vehicle.
|
| Access the Complete guide! |
