Auto Parts Search
We have info for following modifications of 1996 Mercury Tracer
- 1996 Mercury Tracer LTS 1.8 L4 GAS, CID:112, Fuel Injection, Aspiration:112, Engine VIN:, Desg:8
- 1996 Mercury Tracer Trio 1.9 L4 GAS, CID:116, Fuel Injection, Aspiration:116, Engine VIN:, Desg:J
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Mercury Tracer AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Mercury Tracer cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1996 Mercury Tracer Trio 1.9 L4 GAS
- Raise and support vehicle.
- Remove wheel and splash shield.
- Raise staked portion of halfshaft retaining nut
- Remove retaining nut and discard.
- Remove cotter pin from tie rod end and separate tie rod end from steering knuckle using a suitable tie rod remover tool.
- Remove lower ball joint clamp bolt and pry down on lower control arm to separate ball joint from steering knuckle.
- Pull outward on steering knuckle/brake assembly.
- Carefully pull halfshaft from steering knuckle and position knuckle aside.
- Support transaxle with a suitable jack stand.
- Remove four transaxle mount to crossmemb...
CLICK HERE TO GET FULL ACCESS TO 1996 Mercury Tracer DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Mercury Tracer AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1996 Mercury Tracer cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1996 Mercury Tracer LTS 1.8 L4 GAS
- Raise and support vehicle.
- Remove wheel and splash shield.
- Raise staked portion of halfshaft retaining nut
- Remove retaining nut and discard.
- Remove cotter pin from tie rod end and separate tie rod end from steering knuckle using a suitable tie rod remover tool.
- Remove lower ball joint clamp bolt and pry down on lower control arm to separate ball joint from steering knuckle.
- Pull outward on steering knuckle/brake assembly.
- Carefully pull halfshaft from steering knuckle and position knuckle aside.
- Support transaxle with a suitable jack stand.
- Remove four transaxle mount to crossmemb...
CLICK HERE TO GET FULL ACCESS TO 1996 Mercury Tracer DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1996 Mercury Tracer vehicle. |
Access the Complete guide! |