Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1996 Dodge Dakota car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1996 Dodge Dakota automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1996 Dodge Dakota
- 1996 Dodge Dakota 3.9 V6 GAS, CID:239, Fuel Injection, Aspiration:239, Engine VIN:, Desg:X
- 1996 Dodge Dakota 5.2 V8 GAS, CID:318, Fuel Injection, Aspiration:318, Engine VIN:, Desg:Y
- 1996 Dodge Dakota 5.2 V8 CNG, CID:318, Fuel Injection, Aspiration:318, Engine VIN:, Desg:T
- 1996 Dodge Dakota 2.5 L4 GAS, CC:2507, CID:153, Fuel Injection, Aspiration:153, Engine VIN:, Desg:P
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1996 Dodge Dakota AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1996 Dodge Dakota cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1996 Dodge Dakota 5.2 V8 GAS
- Disconnect battery ground cable.
- Remove alternator drive belt.
- Remove pivot and mounting bolts, then position alternator for wire connection access.
- Remove harness hold-down, battery terminal, ground terminal ...
CLICK HERE TO GET FULL ACCESS TO 1996 Dodge Dakota STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1996 Dodge Dakota AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1996 Dodge Dakota cars and light trucks from 1990+.
Starter, Replace -> 2WD Models -> 4WD Models
Vehicle: 1996 Dodge Dakota 5.2 V8 GAS
2WD Models
- Disconnect battery ground cable.
- Raise and support vehicle.
- Remove lower mounting nut and lock washer, then remover upper mounting bolt.
- Move starter forward until gears clears bellhousing, then tilt starter nose down past exhaust pipe.
- Remove battery and solenoid wires, then remove starter from vehicle.
- Reverse procedure to install, noting the following:
- Torque starter mounting bolts to 50 ft. lbs.
- Torque starter mounting nuts to 20 ft. lbs.
- Torque battery lead terminal nut to 90 in. lbs.
- Torque solenoid lead terminal nut to 22 in. lbs.
4WD Models
- Disconnect battery ground cabl...
CLICK HERE TO GET FULL ACCESS TO 1996 Dodge Dakota STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1996 Dodge Dakota AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1996 Dodge Dakota cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1996 Dodge Dakota 3.9 V6 GAS
- Disconnect battery ground cable.
- Remove alternator drive belt.
- Remove pivot and mounting bolts, then position alternator for wire connection access.
- Remove harness hold-down, battery terminal, ground terminal ...
CLICK HERE TO GET FULL ACCESS TO 1996 Dodge Dakota STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1996 Dodge Dakota AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1996 Dodge Dakota cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1996 Dodge Dakota 2.5 L4 GAS
- Disconnect battery ground cable.
- Remove alternator drive belt.
- Remove pivot and mounting bolts, then position alternator for wire connection access.
- Remove harness hold-down, battery terminal, ground terminal...
CLICK HERE TO GET FULL ACCESS TO 1996 Dodge Dakota STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1996 Dodge Dakota AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1996 Dodge Dakota cars and light trucks from 1990+.
Starter, Replace -> 2WD Models -> 4WD Models
Vehicle: 1996 Dodge Dakota 3.9 V6 GAS
2WD Models
- Disconnect battery ground cable.
- Raise and support vehicle.
- Remove lower mounting nut and lock washer, then remover upper mounting bolt.
- Move starter forward until gears clears bellhousing, then tilt starter nose down past exhaust pipe.
- Remove battery and solenoid wires, then remove starter from vehicle.
- Reverse procedure to install, noting the following:
- Torque starter mounting bolts to 50 ft. lbs.
- Torque starter mounting nuts to 20 ft. lbs.
- Torque battery lead terminal nut to 90 in. lbs.
- Torque solenoid lead terminal nut to 22 in. lbs.
4WD Models
- Disconnect battery ground cabl...
CLICK HERE TO GET FULL ACCESS TO 1996 Dodge Dakota STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1996 Dodge Dakota AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1996 Dodge Dakota cars and light trucks from 1990+.
Starter, Replace
Vehicle: 1996 Dodge Dakota 2.5 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- Remove heat shield clamp and heat shield, if equipped.
- Disconnect battery cable at starter motor, then remove solenoid leads and wiring connector at solenoid.
- Remove lower bolt from mounting flan...
CLICK HERE TO GET FULL ACCESS TO 1996 Dodge Dakota STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1996 Dodge Dakota vehicle.
|
| Access the Complete guide! |
