Auto Parts Search


      Over 40 million used auto parts online. Shop online for auto and truck parts and save up to 75%

1996 Chrysler NEW Yorker CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Chrysler REPAIR SHOPS DON'T WANT YOU TO KNOW

Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!

Help me findSearch

Select Section

Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1996 Chrysler NEW Yorker car and truck repair procedures including Chrysler engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your Chrysler NEW Yorker automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >
Using the Automotix DIY repair procedures will save you hundreds and even thousands of dollars! In addition, it will save you hours of touring the city searching for Chrysler mechanics you can trust. The Automotix DIY solution is particularly affordable. A full access to the entire DIY repair procedures and diagrams for your 1996 Chrysler NEW Yorker vehicle will cost less than a single gallon of gas. Here are some of the DIY repair tips and procedures you will find here:

A/C & HEATER SERVICE PROCEDURES FOR 1996 Chrysler NEW Yorker AUTOMOBILES

Orifice Tube/Expansion Valve Locations -> Domestic Passenger Cars -> 1996-97
Vehicle: 1996 Chrysler NEW Yorker 3.5 V6 GAS

[[table data]]

CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler NEW Yorker A/C & HEATER SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1996 Chrysler NEW Yorker AUTOMOBILES

Anti-lock Brakes -> Type 4-Teves Mark IV Anti-Lock Braking System -> Description -> Anti-Lock Warning Lamp -> Brake Warning Lamp -> Components -> Controller Anti-Lock Brake System (CAB) -> Fault Diagnostic System -> Hydraulic Control Unit (HCU) -> Latched Fault -> Locked Fault -> Master Cylinder w/Center Valves & Fluid Level Switch-FLS-1 -> Non-Erasable Fault -> Non-Latching Fault -> Normal Operation Of Warning Lamp -> Pump/Motor Assembly -> System Operation -> Traction Control Function Lamp -> Traction Control Warning Lamp -> Vacuum Booster w/Integrated Pedal Travel Sensor -> Warning Lamp Systems -> Wheel Speed Sensors
Vehicle: 1996 Chrysler NEW Yorker 3.5 V6 GAS

System Operation

Under normal braking conditions, the Anti-Lock Brake System (ABS) functions as a standard brake system with a diagonally split master cylinder and conventional brake booster.

If a wheel lock is detected during braking, the system will enter ABS mode. During ABS mode, hydraulic pressure in the four wheel circuits is modulated to prevent any wheel from locking.

Each wheel circuit has a set of electrical valves to provide modulation to each wheel. Front wheels receive separate signals and rear wheels receive the same signal.

Fault Diagnostic System

Faults detected by the Co...

CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler NEW Yorker BRAKE SERVICE PROCEDURES

FUEL FILTER REPLACEMENT PROCEDURES FOR 1996 Chrysler NEW Yorker AUTOMOBILES

DaimlerChrysler/AMC/Eagle Passenger Cars -> Component Locations -> 1999-04 300M, 2004-93 Concorde, Intrepid, Vision, 1994-02 LHS & 1994-96 New Yorker
Vehicle: 1996 Chrysler NEW Yorker 3.5 V6 GAS

CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler NEW Yorker FUEL FILTER REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1996 Chrysler NEW Yorker AUTOMOBILES

CV AXLE SHAFT, Replace
Vehicle: 1996 Chrysler NEW Yorker 3.5 V6 GAS

  • Raise and support vehicle.
  • Remove front wheel and tire assembly from vehicle.
  • Remove front caliper assembly from front steering knuckle assembly.
  • Remove front braking disk (rotor) from hub, by pulling it straight off wheel mounting studs.
  • Remove speed sensor cable routing bracket from strut assembly.
  • Remove hub and bearing to stub axle retaining nut.
  • Install a puller, Special Tool 6790 or equivalent, on hub and bearing assembly, using wheel lug nuts to secure it in place.
  • Install a wheel lug nut on wheel stud to protect threads on stud. Install a flat blade pry tool to keep hub ...

CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler NEW Yorker DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1996 Chrysler NEW Yorker AUTOMOBILES

Alternator, Replace
Vehicle: 1996 Chrysler NEW Yorker 3.5 V6 GAS

  • Disconnect battery ground cable.
  • Loosen lower mounting bolt.
  • Loosen pivot bolt.
  • Loosen belt adjustment bolt.
  • Remove alternator drive belt.
  • Remove bracket.
  • Remove lower mounting bolt.
  • Remove pivot bolt.
  • Remove alternator.
  • Disconnect alternator field circuit plug.
  • Remove the B+ termin...

CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler NEW Yorker STARTER & ALTERNATOR REPLACEMENT PROCEDURES

MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Chrysler NEW Yorker AUTOMOBILES

Chrysler LLC Cars -> Anti-Lock Brake System (ABS) Warning Lamp -> Breeze, Cirrus, Concord, Intrepid, LHS, Neon, New Yorker, Prowler, Sebring Convertible, Sebring Sedan, Stratus Sedan, Viper, Vision & 300M
Vehicle: 1996 Chrysler NEW Yorker 3.5 V6 GAS

This lamp should light when the ignition is turned On. The lamp may light for as long as 30 seconds as a bulb and system inspection. If the lamp remains lit or lights while operating the vehicle, a fault condition in the anti-lock brake system is indicated. When the lamp is lit, turn ignition Off, then start the engine again. If the lamp still remains lit, the a...

CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler NEW Yorker MAINTENANCE LAMP RESET PROCEDURES

RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1996 Chrysler NEW Yorker AUTOMOBILES

Radiator, Replace
Vehicle: 1996 Chrysler NEW Yorker 3.5 V6 GAS

  • Drain cooling system.
  • Remove sight shields and right and left headlamp modules.
  • Discharge and recover A/C refrigerant.
  • Remove upper radiator crossmember, then the coolant hose clamps and hoses from radiator.
  • Disconnect automatic transaxle cooler lines from radiator.
  • On models equipped with auxiliary transaxle cooler, disconnect rubber auxiliary cooler lines.
  • On all models, disconnect radiator fan wiring from the RFI module.
  • Disconnect upper radiator mounting screws.
  • On models equipped with engine block heater,disconnect wiring.
  • On all m...

CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler NEW Yorker RADIATOR & HOSE REPLACEMENT PROCEDURES

SERPENTINE BELT SERVICE PROCEDURES FOR 1996 Chrysler NEW Yorker AUTOMOBILES

Serpentine Drive Belt, Replace
Vehicle: 1996 Chrysler NEW Yorker 3.5 V6 GAS

  • Raise and support vehicle.
  • Remove right front splash s...

CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler NEW Yorker SERPENTINE BELT SERVICE PROCEDURES

COMPONENT LOCATION DIAGRAMS FOR 1996 Chrysler NEW Yorker AUTOMOBILES

Component location diagrams for most 1996 Chrysler NEW Yorker cars and light trucks sold in the U.S. from 1990+.

Instrument Panel Connections Diagram for 1996 Chrysler NEW Yorker  3.5 V6 GASInstrument Panel Connections Diagram for 1996 Chrysler NEW Yorker 3.5 V6 GAS

Components on diagram:
  • Radio
  • Traction Control Switch
  • Body Control Module
  • A/C-Heater Control
  • Message Center
  • Engine Compartment Splices Diagram for 1996 Chrysler NEW Yorker  3.5 V6 GASEngine Compartment Splices Diagram for 1996 Chrysler NEW Yorker 3.5 V6 GAS

    Components on diagram:
  • Splice S-103
  • Splice S-133
  • Splice S-135
  • Splice S-136
  • Splice S-137
  • CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler NEW Yorker PARTS/COMPONENTS LOCATION DIAGRAMS!

    WIRING DIAGRAMS FOR 1996 Chrysler NEW Yorker AUTOMOBILES

    OEM drawn wiring diagrams for most 1996 Chrysler NEW Yorker cars and light trucks sold in the U.S.

    1996 Chrysler NEW Yorker  3.5 V6 GAS Wiring Diagram1996 Chrysler NEW Yorker 3.5 V6 GAS Wiring Diagram

    Components on diagram:
  • Vehicle Speed Control/Horn Switch
  • Ignition Switch
  • Powertrain Control Module
  • 1996 Chrysler NEW Yorker  3.5 V6 GAS Wiring Diagram1996 Chrysler NEW Yorker 3.5 V6 GAS Wiring Diagram

    Components on diagram:
  • Ignition Switch
  • Left Front Power Window Switch
  • Right Front Power Window Switch
  • Left Front Power Window Motor
  • Right Front Power Window Motor
  • CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler NEW Yorker WIRING DIAGRAMS!

    TECHNICAL SERVICE BULLETINS FOR 1996 Chrysler NEW Yorker AUTOMOBILES

    OEM TSB listings for most 1996 Chrysler NEW Yorker cars and light trucks sold in the U.S. from 1985+.

    Document: CHILD SEAT TETHER ANCHOR INSTALLATION - REV
    Vehicle: 1996 Chrysler NEW Yorker 3.5 V6 GAS

    Auto Systems:
  • Seats, Belts, Interior Trim, Carpets, Air Bags
  • Document: AUTOMATIC TRANSMISSION DIAGNOSTIC TEARDOWN PROCEDURE - REVISED
    Vehicle: 1996 Chrysler NEW Yorker 3.5 V6 GAS

    Auto Systems:
  • Automatic Trans, Coolers, Torque Converter
  • CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler NEW Yorker TECHNICAL SERVICE BULLETINS!

    COMPONENT/PARTS SPECIFICATIONS FOR 1996 Chrysler NEW Yorker AUTOMOBILES

    BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 1996 Chrysler NEW Yorker cars and light trucks sold in the U.S. and Canada from 1970+.

    • Brake caliper mounting bolt torque
    • Brake drum runout, machining, & discard specs
    • Minimum brake lining thickness.
    • Brake rotor runout, parallelism, machining, discard, & finish specs

    A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 1996 Chrysler NEW Yorker cars and light trucks sold in the U.S. and Canada from 1980+.

    • Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap

    COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.

    PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules

    QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 1996 Chrysler NEW Yorker cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.

    • Automatic transmission/transaxles capacities, lubricant recommendations
    • Differential/final drive capacities, lube recommendations, grades, & viscosities
    • Final drive fill & drain plug torques
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
    • Severe service maintenance & interval recommendations
    • Tire sizes, wheel nut/bolt torque, pressures & rim sizes
    • Transfer case capacities, lube recommendations, grades, & viscosities

    TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 1996 Chrysler NEW Yorker cars and light trucks sold in the U.S. and Canada from 1980+

    • Airflow sensor electrical specifications
    • Tensioning specifications for systems with automatic tensioners
    • Barometric pressure sensor specs
    • Battery group number and cranking performance
    • Crankshaft & camshaft position sensor resistance
    • Engine compression pressures
    • Coolant temperature sensor specs
    • Computer advance.
    • Diesel fuel temperature sensor resistance.
    • Distributor advance specifications
    • Ignition pickup coil resistance
    • Exhaust gas recirculation temperature sensor resistance
    • Engine fastener torque values
    • Firing order diagrams
    • Fuel system pressures
    • Generator (alternator) specs
    • Intake air temperature sensor specs
    • Ignition coil specifications
    • Fuel injector resistance
    • Engine idle speeds
    • Knock sensor resistance
    • Manifold absolute pressure sensor specs
    • Mixture control solenoid resistance
    • Voltage regulator specs
    • Spark plug applications & gaps
    • Starter motor electrical specs.
    • Tensioning specifications for systems without automatic tensioners
    • Throttle body temperature sensor resistance
    • Ignition timing in degrees at rpm
    • Transmission oil temperature sensor resistance
    • Throttle position sensor specs
    • Vacuum sensor valve specs

    CLICK HERE TO GET FULL ACCESS TO 1996 Chrysler NEW Yorker SPECIFICATIONS DATA!

    Shop online for auto body parts, engines, wheels, lights...

    Click here to view more details1993 Chrysler New Yorker Throttle Position Sensor, Pin type; 3-prong male terminal; A high quality, direct fit OE replacement throttle position sensor; With 2 years limited Trustbuilt warranty..

    Source: Auto Body Parts Store

    $64.66

    Click here to view more details about 1996 Chrysler New Yorker Antenna1996 Chrysler New Yorker Antenna, 4-section mast; 1200 mm cable; With top and side key; A high quality universal fender mount antenna; May require modification or other adjustment to your vehicle upon installation; Backed by 1-year, unlimited-mileage warranty..

    Source: Auto Body Parts Store

    $5.62

    Click here to view more details2000 Chrysler Cirrus 15" x 6" Steel Wheel, Steel Wheel; 15 X 6; 16 Holes; 5 Lug; 100MM BP; Black, , .

    Source: Wheels / Rims, Mirrors & Lights Store

    $69.50

    Click here to view more details1987 Chrysler New Yorker L4, 2.2 L, 135 CID Rebuilt Engine, FWD, turbo, 8-bolt flywheel, head #782, (supplied with new head casting)., Warranty: 3-Year/100,000 Mile, .

    Source: Rebuilt Engines Store

    $1,598.00

    Click here to view more details1988 Chrysler NEW Yorker Used A/C Compressor, 3.0, AUTO, FWD 6-181 (3.0L), Very Good.

    Source: Used Auto Parts Store

    $132.00

    Click here to view more details1982 Chrysler NEW Yorker Used Flywheel, flex plate, 8-318, Very Good.

    Source: Used Auto Parts Store

    $70.00
    More parts
    Help me findSearch
    Auto Repair Quick Search
    Help me find
    Search DIY repair manuals by VIN...
    Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

    Find out what info we have for your vehicle

    Get the Complete Technical Service Bulletins!
    Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1996 Chrysler NEW Yorker vehicle.
    Access the Complete guide!
    Need To Fix Your Car or Truck?
    Save Money With Free Car Insurance Quote
    FREE car insurance quote
    Enter Zip Code:
    Auto Repair Quick Search
    Help me find