Auto Parts Search
We have info for following modifications of 1996 Acura TL
- 1996 Acura TL 2.5 L5 GAS, CC:2451, Fuel Injection
- 1996 Acura TL 3.2 V6 GAS, CC:3206, Fuel Injection
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Acura TL AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Acura TL cars and light trucks sold in the U.S. from 1990+.
Acura -> Automatic Transmission (A/T) Fluid Temperature Indicator -> 1996-2003 3.2TL
Vehicle: 1996 Acura TL 3.2 V6 GAS
The A/T fluid temperature lamp will turn on when ignition switch is placed in on position and should turn off after a few seconds. If lamp illuminates while driving, the vehicle should be pulled off ...
CLICK HERE TO GET FULL ACCESS TO 1996 Acura TL MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Acura TL AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Acura TL cars and light trucks sold in the U.S. from 1990+.
Acura -> Automatic Transmission D, D4 Or D5 Indicator Lamp -> 1996-98 3.2TL
Vehicle: 1996 Acura TL 3.2 V6 GAS
When the PCM detects an abnormal automatic transmission input or output signal the D4 lamp will blink. After completing diagnosis and repairs, reset the D4 lamp as follows:
- Obtain the radio anti-thef...
CLICK HERE TO GET FULL ACCESS TO 1996 Acura TL MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Acura TL AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Acura TL cars and light trucks sold in the U.S. from 1990+.
Acura -> Check Engine/Malfunction Indicator (MIL)/PGM-FI Warning Indicator Lamp -> 1996-98 3.2TL
Vehicle: 1996 Acura TL 3.2 V6 GAS
The Check Engine/PGM-FI Warning Indicator Lamp should be illuminated for approximately 2 seconds after the ignition switch is placed in the on position as a bulb check. After approximately 2 seconds, the lamp should go off. If the lamp remains lit, a problem in the Programmed Fuel Injection (PGM-FI) system is indicated and a diagnostic trouble code is stored in the Electronic Control Unit (ECU) memory. After diagnosis and repair, clear the ECU memory of diagnostic trouble codes.
After diag...
CLICK HERE TO GET FULL ACCESS TO 1996 Acura TL MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Acura TL AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Acura TL cars and light trucks sold in the U.S. from 1990+.
Acura -> Maintenance Required Lamp -> 1996-98 3.2TL
Vehicle: 1996 Acura TL 3.2 V6 GAS
The maintenance required lamp will light in 7400-7600 mile intervals to indicate maintenance is required. After performing the required maintenance, res...
CLICK HERE TO GET FULL ACCESS TO 1996 Acura TL MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Acura TL AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Acura TL cars and light trucks sold in the U.S. from 1990+.
Acura -> Anti-Lock Brake System (ABS) Warning Lamp -> 1996 3.2TL
Vehicle: 1996 Acura TL 3.2 V6 GAS
The ABS warning lamp is used to warn of a system fault. The lamp monitors the condition of the anti-lock brake system. It will be lit during engine start-up, but should go off when the self-diagnostic system determines that the system is operating properly. If the lamp remains lit, a fault in the anti-lock brake system is indicated. Even though the system ...
CLICK HERE TO GET FULL ACCESS TO 1996 Acura TL MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1996 Acura TL AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1996 Acura TL cars and light trucks sold in the U.S. from 1990+.
Acura -> Traction Control System (TCS) Warning Lamp -> 1996-98 3.2TL
Vehicle: 1996 Acura TL 3.2 V6 GAS
The Traction Control System warning lamp is used to warn of a system fault. The lamp monitors the condition of the TCS. It will be lit during engine start-up, but should go off when the self-diagnostic system determines that the system is operating properly. If the lamp remains lit, a fault in the TCS is indicated. Even though the system is operating properly, the indicator may come on if the TCS switch has been manually turned Off, vehicle goes into a spin, one drive wheel is stuck, only ...
CLICK HERE TO GET FULL ACCESS TO 1996 Acura TL MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1996 Acura TL vehicle. |
Access the Complete guide! |