Auto Parts Search
We have info for following modifications of 1994 Jeep Wrangler
- 1994 Jeep Wrangler S 2.5 L4 GAS, CID:150, Fuel Injection, Aspiration:150, Engine VIN:, Desg:P
- 1994 Jeep Wrangler Sahara 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
- 1994 Jeep Wrangler Renegade 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
- 1994 Jeep Wrangler SE 4.0 L6 GAS, CID:242, Fuel Injection, Aspiration:242, Engine VIN:, Desg:S
MAINTENANCE LAMP RESET PROCEDURES FOR 1994 Jeep Wrangler AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1994 Jeep Wrangler cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> EGR System Malfunction Indicator Lamp -> 1993-94 w/California Emissions & 1995-2001
Vehicle: 1994 Jeep Wrangler Sahara 4.0 L6 GAS
The Powertrain Control Module (PCM) performs an On-Board Diagnostic (OBD) inspection of the EGR system on all California Vehicles. The diagnostic system uses the electronic EGR Transducer (EET) for the system tests.
The OBD inspection activates only during selected engine/driving conditions. When the conditions are met, the PCM energizes the EET solenoid to disable the EGR. The PCM inspects for a change in the oxygen sensor signal. If the air/fuel mixture goes lean, the PCM will attempt t...
CLICK HERE TO GET FULL ACCESS TO 1994 Jeep Wrangler MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1994 Jeep Wrangler AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1994 Jeep Wrangler cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> EGR System Malfunction Indicator Lamp -> 1993-94 w/California Emissions & 1995-2001
Vehicle: 1994 Jeep Wrangler SE 4.0 L6 GAS
The Powertrain Control Module (PCM) performs an On-Board Diagnostic (OBD) inspection of the EGR system on all California Vehicles. The diagnostic system uses the electronic EGR Transducer (EET) for the system tests.
The OBD inspection activates only during selected engine/driving conditions. When the conditions are met, the PCM energizes the EET solenoid to disable the EGR. The PCM inspects for a change in the oxygen sensor signal. If the air/fuel mixture goes lean, the PCM will attempt t...
CLICK HERE TO GET FULL ACCESS TO 1994 Jeep Wrangler MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1994 Jeep Wrangler AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1994 Jeep Wrangler cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Air Bag Indicator Lamp ->
Vehicle: 1994 Jeep Wrangler SE 4.0 L6 GAS
The air bag indicator lamp lights for 6-8 seconds each time the ignition is turned On. The lamp indicates a system self-test is being performed by the air bag co...
CLICK HERE TO GET FULL ACCESS TO 1994 Jeep Wrangler MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1994 Jeep Wrangler AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1994 Jeep Wrangler cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Check Gauge Warning Lamp ->
Vehicle: 1994 Jeep Wrangler Renegade 4.0 L6 GAS
When the ignition is turned On, the lamp will light for approximately 2 seconds as a bulb inspection. The PCM continually monitors the engine oil pressure, engine coolant temperature and electrical system voltage. The check gauges lamp w...
CLICK HERE TO GET FULL ACCESS TO 1994 Jeep Wrangler MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1994 Jeep Wrangler AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1994 Jeep Wrangler cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Check Gauge Warning Lamp ->
Vehicle: 1994 Jeep Wrangler S 2.5 L4 GAS
When the ignition is turned On, the lamp will light for approximately 2 seconds as a bulb inspection. The PCM continually monitors the engine oil pressure, engine coolant temperature and electrical system voltage. The check gauges lamp w...
CLICK HERE TO GET FULL ACCESS TO 1994 Jeep Wrangler MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1994 Jeep Wrangler AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1994 Jeep Wrangler cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Trucks -> Service 4WD System Warning Lamp ->
Vehicle: 1994 Jeep Wrangler SE 4.0 L6 GAS
This lamp should light for a approximately 2 seconds when the ignition is turned On as a bulb check. If the warning lamp...
CLICK HERE TO GET FULL ACCESS TO 1994 Jeep Wrangler MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1994 Jeep Wrangler vehicle. |
Access the Complete guide! |