Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1994 Dodge B350 VAN car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1994 Dodge B350 VAN automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1994 Dodge B350 VAN
- 1994 Dodge B350 VAN 5.2 V8 GAS, CID:318, Fuel Injection, Aspiration:318, Engine VIN:, Desg:Y
- 1994 Dodge B350 VAN 5.9 V8 GAS, CID:360, Fuel Injection, Aspiration:360, Engine VIN:, Desg:Z
- 1994 Dodge B350 VAN Sportsman 5.2 V8 GAS, CID:318, Fuel Injection, Aspiration:318, Engine VIN:, Desg:Y
- 1994 Dodge B350 VAN Sportsman 5.9 V8 GAS, CID:360, Fuel Injection, Aspiration:360, Engine VIN:, Desg:Z
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Dodge B350 VAN AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Dodge B350 VAN cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 1994 Dodge B350 VAN Sportsman 5.9 V8 GAS
The following procedure is described for a propeller shaft equipped with only a cardan joint in the tube yoke. If the propeller shaft is equipped with a companion yoke, simply repeat the following steps to remove the cardan joint from the companion yoke after removing the cardan joint from the tube yoke. Individual components of cardan universal joints are not serviceable. If worn or leaking, they must be replaced as an assembly.
Disassemble
- Remove propeller shaft.
- Using a soft drift, tap outside of bearing cap assembly to loosen snap ring.
- Remove snap rings from both si...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge B350 VAN DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Dodge B350 VAN AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Dodge B350 VAN cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Install -> Remove
Vehicle: 1994 Dodge B350 VAN 5.2 V8 GAS
Remove
- Raise and support vehicle.
- Shift transmission to Neutral position.
- Using a suitable marker, mark a line across axle pinion yoke, or companion flange, and propeller shaft, or companion yoke for installation reference.
- On models with Dana axle, remove bolts holding universal joint clamps to pinion yoke.
- On models with Corporate axle, remove bolts holding companion yoke to companion flange.
- Slide slip yoke off of transmission, or transfer case, ou...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge B350 VAN DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Dodge B350 VAN AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Dodge B350 VAN cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Install -> Remove
Vehicle: 1994 Dodge B350 VAN Sportsman 5.9 V8 GAS
Remove
- Raise and support vehicle.
- Shift transmission to Neutral position.
- Using a suitable marker, mark a line across axle pinion yoke, or companion flange, and propeller shaft, or companion yoke for installation reference.
- On models with Dana axle, remove bolts holding universal joint clamps to pinion yoke.
- On models with Corporate axle, remove bolts holding companion yoke to companion flange.
- Slide slip yoke off of transmission, or transfer case, ou...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge B350 VAN DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Dodge B350 VAN AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Dodge B350 VAN cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Install -> Remove
Vehicle: 1994 Dodge B350 VAN 5.9 V8 GAS
Remove
- Raise and support vehicle.
- Shift transmission to Neutral position.
- Using a suitable marker, mark a line across axle pinion yoke, or companion flange, and propeller shaft, or companion yoke for installation reference.
- On models with Dana axle, remove bolts holding universal joint clamps to pinion yoke.
- On models with Corporate axle, remove bolts holding companion yoke to companion flange.
- Slide slip yoke off of transmission, or transfer case, ou...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge B350 VAN DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Dodge B350 VAN AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Dodge B350 VAN cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 1994 Dodge B350 VAN 5.2 V8 GAS
The following procedure is described for a propeller shaft equipped with only a cardan joint in the tube yoke. If the propeller shaft is equipped with a companion yoke, simply repeat the following steps to remove the cardan joint from the companion yoke after removing the cardan joint from the tube yoke. Individual components of cardan universal joints are not serviceable. If worn or leaking, they must be replaced as an assembly.
Disassemble
- Remove propeller shaft.
- Using a soft drift, tap outside of bearing cap assembly to loosen snap ring.
- Remove snap rings from both si...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge B350 VAN DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1994 Dodge B350 VAN AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1994 Dodge B350 VAN cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Install -> Remove
Vehicle: 1994 Dodge B350 VAN Sportsman 5.2 V8 GAS
Remove
- Raise and support vehicle.
- Shift transmission to Neutral position.
- Using a suitable marker, mark a line across axle pinion yoke, or companion flange, and propeller shaft, or companion yoke for installation reference.
- On models with Dana axle, remove bolts holding universal joint clamps to pinion yoke.
- On models with Corporate axle, remove bolts holding companion yoke to companion flange.
- Slide slip yoke off of transmission, or transfer case, ou...
CLICK HERE TO GET FULL ACCESS TO 1994 Dodge B350 VAN DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1994 Dodge B350 VAN vehicle.
|
| Access the Complete guide! |
