Auto Parts Search
We have info for following modifications of 1994 Acura Vigor
- 1994 Acura Vigor GS 2.5 L5 GAS, CC:2451, Fuel Injection
- 1994 Acura Vigor LS 2.5 L5 GAS, CC:2451, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 1994 Acura Vigor AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Acura Vigor cars and light trucks from 1990+.
Power Brake Units -> Diagnosis & Testing -> Check Valve Test -> Function Test -> Leak Test
Vehicle: 1994 Acura Vigor LS 2.5 L5 GAS
Function Test
- With engine stopped, depress brake pedal several times, then depress pedal hard and hold for 15 seconds. If pedal sinks, master cylinder, brake line or brake caliper is faulty.
- With brake pedal depressed, start engine. If pedal sinks slightly, vacuum booster is operating. If pedal height does not vary, booster or check valve is faulty.
Leak Test
- With engine running, depress brake pedal and hold, then stop engine. If pedal height does not vary with brake pedal ...
CLICK HERE TO GET FULL ACCESS TO 1994 Acura Vigor BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Acura Vigor AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Acura Vigor cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> Front -> Rear
Vehicle: 1994 Acura Vigor LS 2.5 L5 GAS
Front
- Raise and support front of vehicle and remove wheels.
- Remove caliper pin bolt, then pivot caliper up away from rotor.
- Remove brake pad shims and pads, Figs. through .
- Clean caliper and inspect for excessive wear or damage.
- Install pad retainers, then pad shims and pads, Figs. through .
- Back out bleed screw and push in piston to allow caliper to fit over pads, then tighten bleed screw to specification.
- Pivot caliper into position, then install pin bolt and tighten to specifications.
Rear
- Raise and support rear of vehicle and remove wheels.
- Remove caliper shield, if eq...
CLICK HERE TO GET FULL ACCESS TO 1994 Acura Vigor BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Acura Vigor AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Acura Vigor cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Brake Hoses -> Dual Proportioning Valve -> Master Cylinder
Vehicle: 1994 Acura Vigor LS 2.5 L5 GAS
Master Cylinder
The master cylinders used on these vehicles are not designed to be rebuilt. If a master cylinder is found to be faulty, replace it as an assembly.
Dual Proportioning Valve
The dual proportioning valve is not a serviceable component and must be replaced if found to be faulty.
Brake Hoses
- Refer to Figs. thro...
CLICK HERE TO GET FULL ACCESS TO 1994 Acura Vigor BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Acura Vigor AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Acura Vigor cars and light trucks from 1990+.
Hydraulic Brake Systems -> Hydraulic Brake System Specifications
Vehicle: 1994 Acura Vigor LS 2.5 L5 GAS
CLICK HERE TO GET FULL ACCESS TO 1994 Acura Vigor BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Acura Vigor AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Acura Vigor cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Assembly & Installation -> Front -> Integra, TL & Vigor -> Legend -> Rear -> Removal & Disassembly
Vehicle: 1994 Acura Vigor GS 2.5 L5 GAS
Front
Removal & Disassembly
- Raise and support front of vehicle and remove wheels.
- Remove banjo bolt and disconnect brake line from caliper. Secure hose in raised position to prevent leakage.
- Remove caliper pin bolt, then caliper, Figs. through .
- On Legend, TL and Vigor models, remove pad spring from caliper.
- On all models, position a block of wood or shop rag in caliper opposite piston, then carefully remove piston by applying compressed air into fluid inlet port. Use only as much air pressure as is needed to remove piston.
- Remove piston boot and ...
CLICK HERE TO GET FULL ACCESS TO 1994 Acura Vigor BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1994 Acura Vigor AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1994 Acura Vigor cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Brake Hoses -> Dual Proportioning Valve -> Master Cylinder
Vehicle: 1994 Acura Vigor GS 2.5 L5 GAS
Master Cylinder
The master cylinders used on these vehicles are not designed to be rebuilt. If a master cylinder is found to be faulty, replace it as an assembly.
Dual Proportioning Valve
The dual proportioning valve is not a serviceable component and must be replaced if found to be faulty.
Brake Hoses
- Refer to Figs. thro...
CLICK HERE TO GET FULL ACCESS TO 1994 Acura Vigor BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1994 Acura Vigor vehicle. |
Access the Complete guide! |