Auto Parts Search


      Over 40 million used auto parts online. Shop online for auto and truck parts and save up to 75%

1993 Plymouth Acclaim CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Plymouth REPAIR SHOPS DON'T WANT YOU TO KNOW

Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!

    Automotive Domain Names

    Help me findSearch

    Select Section

    Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1993 Plymouth Acclaim car and truck repair procedures including Plymouth engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your Plymouth Acclaim automobile. Try the Automotix DIY solution today!
    DIY REPAIR SAMPLES > CONTINUE EXPLORING >
    Using the Automotix DIY repair procedures will save you hundreds and even thousands of dollars! In addition, it will save you hours of touring the city searching for Plymouth mechanics you can trust. The Automotix DIY solution is particularly affordable. A full access to the entire DIY repair procedures and diagrams for your 1993 Plymouth Acclaim vehicle will cost less than a single gallon of gas. Here are some of the DIY repair tips and procedures you will find here:

    A/C & HEATER SERVICE PROCEDURES FOR 1993 Plymouth Acclaim AUTOMOBILES

    Compressor Service -> Model SD709 & SD709P Compressors -> COMPRESSOR CLUTCH SERVICE -> COMPRESSOR CLUTCH, REPLACE -> Installation -> Removal
    Vehicle: 1993 Plymouth Acclaim 3.0 V6 GAS

    COMPRESSOR CLUTCH, REPLACE

    Removal
    • Using a spanner wrench, insert pins into any two threaded holes of the clutch front plate. Hold plate and remove hex nut.
    • Using a suitable puller, align puller center bolt to compressor shaft, then hand-tighten puller bolts into threaded holes.
    • Turn center bolt clockwise until front plate is loosened.
    • Using a suitable screwdriver and hammer, remove shaft key by lightly tapping it loose.
    • Remove external front housing snap ring, then insert the lips of rotor puller jaws into snap ring groo...

    CLICK HERE TO GET FULL ACCESS TO 1993 Plymouth Acclaim A/C & HEATER SERVICE PROCEDURES

    BRAKE SERVICE PROCEDURES FOR 1993 Plymouth Acclaim AUTOMOBILES

    Anti-lock Brakes -> Type 2--Bendix Anti-Lock 6 Braking System -> Description -> Controller-Anti-Lock Brake (CAB) -> Master Cylinder & Brake Booster -> Modulator & Pump Motor Assembly -> SYSTEM COMPONENTS -> Wheel Speed Sensors (WSS)
    Vehicle: 1993 Plymouth Acclaim 2.5 L4 GAS

    The Anti-Lock Braking System (ABS) prevents the wheels from locking up when braking, regardless of the surface conditions. This allows the car to stop in a shorter distance, and allows the driver to maintain directional control of the vehicle during heavy braking.

    During normal braking conditions, the ABS operates like a conventional diagonally split, hydraulic power assist system. During heavy braking, however, each wheel's braking pressure is modulated according to its speed. To maintain vehicle stability, both rear wheels receive the same signal.

    There are four major components, Fi...

    CLICK HERE TO GET FULL ACCESS TO 1993 Plymouth Acclaim BRAKE SERVICE PROCEDURES

    FUEL FILTER REPLACEMENT PROCEDURES FOR 1993 Plymouth Acclaim AUTOMOBILES

    DaimlerChrysler/AMC/Eagle Passenger Cars -> Fuel Filter Replacement -> Acclaim, Aries, Caravelle, Charger, Daytona, Dynasty, E-Class, Executive, Horizon, Imperial (FWD), Lancer, LeBaron, LeBaron GTS, Omni, Reliant, Shadow, Spirit, Sundance, Turismo, 600, 1984-93 New Yorker & 1987-84 Laser w/1988-95 2.5L, 1989-92 3.0L & 3.3L -> Fuel System Pressure Relief -> Removal & Installation
    Vehicle: 1993 Plymouth Acclaim 2.5 L4 FLEX

    Do not smoke or allow an open flame of any type when working on or near any fuel system related components. The highly flammable vapor mixtures may ignite, resulting in serious personal injury.

    Prior to disconnecting fuel lines, the fuel system pressure must be relieved to prevent accidental spray of fuel.

    After the battery ...

    CLICK HERE TO GET FULL ACCESS TO 1993 Plymouth Acclaim FUEL FILTER REPLACEMENT PROCEDURES

    DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1993 Plymouth Acclaim AUTOMOBILES

    CV AXLE SHAFT, Replace
    Vehicle: 1993 Plymouth Acclaim 2.5 L4 GAS

    Inboard CV joints have stub shafts splined into differential side gears, or intermediate shaft on right side of an equal length system. Driveshafts are spring loaded and are retained to side gears by constant spring pressure provided by spring contained in CV joints.

    • Raise and support vehicle.
    • Remove tires and wheels.
    • Remove cotter pin, lock and spring washer, then hub nut and washer.
    • If removing righthand driveshaft, speedometer pinion must be removed prior to driveshaft removal.
    • Remove clamp bolt securing ball joint clamp bolt to steering knuckle, then separate ball joint st...

    CLICK HERE TO GET FULL ACCESS TO 1993 Plymouth Acclaim DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

    STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1993 Plymouth Acclaim AUTOMOBILES

    Alternator, Replace
    Vehicle: 1993 Plymouth Acclaim 3.0 V6 GAS

    • Disconnect battery ground cable.
    • Remove alternator drive belt.
    • Remove alternator mounting bolts and separate alternator from mounting bracket.
    • Remove B+ terminal nut, field terminal nuts, and ground wire harness hold down nuts. Remove wire connectors.
    • Remove alternator...

    CLICK HERE TO GET FULL ACCESS TO 1993 Plymouth Acclaim STARTER & ALTERNATOR REPLACEMENT PROCEDURES

    MAINTENANCE LAMP RESET PROCEDURES FOR 1993 Plymouth Acclaim AUTOMOBILES

    Chrysler LLC Cars -> Electronic Throttle Control (ETC) Warning Light ->
    Vehicle: 1993 Plymouth Acclaim 2.5 L4 GAS

    This light will turn on briefly as a bulb check when the ignition switch is placed in the on position. This light will also turn on while the engine is run...

    CLICK HERE TO GET FULL ACCESS TO 1993 Plymouth Acclaim MAINTENANCE LAMP RESET PROCEDURES

    RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1993 Plymouth Acclaim AUTOMOBILES

    Radiator, Replace
    Vehicle: 1993 Plymouth Acclaim 3.0 V6 GAS

    Do not attempt to remove radiator cap or service cooling system while engine is hot.

    • Disconnect battery ground cable.
    • Drain cooling system.
    • Remove hose clamps and hoses.
    • Remove coolant reserve system tank to filler neck tube.
    • Disconnect fan electrical connector, then remove fan and fan support.
    • ...

    CLICK HERE TO GET FULL ACCESS TO 1993 Plymouth Acclaim RADIATOR & HOSE REPLACEMENT PROCEDURES

    SERPENTINE BELT SERVICE PROCEDURES FOR 1993 Plymouth Acclaim AUTOMOBILES

    Serpentine Drive Belt, Replace
    Vehicle: 1993 Plymouth Acclaim 2.5 L4 FLEX

    • To remove or install air conditioning compressor and alternator drive belt, loosen idler pulley lock bolt, then turn adjusting screw to move idler pulley.
    • T...

    CLICK HERE TO GET FULL ACCESS TO 1993 Plymouth Acclaim SERPENTINE BELT SERVICE PROCEDURES

    COMPONENT LOCATION DIAGRAMS FOR 1993 Plymouth Acclaim AUTOMOBILES

    Component location diagrams for most 1993 Plymouth Acclaim cars and light trucks sold in the U.S. from 1990+.

    LH Side Body Wiring Diagram for 1993 Plymouth Acclaim  2.5 L4 FLEXLH Side Body Wiring Diagram for 1993 Plymouth Acclaim 2.5 L4 FLEX

    Components on diagram:
  • Flex Fuel Sensor
  • Fuel Pump Connector
  • Door
  • Power Seat
  • Door Ajar Switch
  • Steering Column Wiring Diagram for 1993 Plymouth Acclaim  3.0 V6 GASSteering Column Wiring Diagram for 1993 Plymouth Acclaim 3.0 V6 GAS

    Components on diagram:
  • Multi-Function Switch
  • Clock Spring
  • Vehicle Speed Control
  • Turn Signal Lever
  • Ignition Switch Connector
  • CLICK HERE TO GET FULL ACCESS TO 1993 Plymouth Acclaim PARTS/COMPONENTS LOCATION DIAGRAMS!

    WIRING DIAGRAMS FOR 1993 Plymouth Acclaim AUTOMOBILES

    OEM drawn wiring diagrams for most 1993 Plymouth Acclaim cars and light trucks sold in the U.S.

    1993 Plymouth Acclaim  3.0 V6 GAS Wiring Diagram1993 Plymouth Acclaim 3.0 V6 GAS Wiring Diagram

    Components on diagram:
  • ABS Pump Motor Relay
  • Anti-Lock Brake System Controller
  • Anti-Lock Brake System Hydraulic Modulator
  • Hydraulic Modulator
  • 1993 Plymouth Acclaim  2.5 L4 FLEX Wiring Diagram1993 Plymouth Acclaim 2.5 L4 FLEX Wiring Diagram

    Components on diagram:
  • Idle Air Control Motor
  • Throttle Position Sensor
  • Powertrain Control Module
  • Heated Oxygen Sensor
  • CLICK HERE TO GET FULL ACCESS TO 1993 Plymouth Acclaim WIRING DIAGRAMS!

    TECHNICAL SERVICE BULLETINS FOR 1993 Plymouth Acclaim AUTOMOBILES

    OEM TSB listings for most 1993 Plymouth Acclaim cars and light trucks sold in the U.S. from 1985+.

    Document: Exterior Lamp Condensation and Replacement Guidelines
    Vehicle: 1993 Plymouth Acclaim 2.5 L4 GAS

    Symptoms:
  • Leaks
  • Auto Systems:
  • Lighting, Horns, Turn Signals, Steering Column
  • Document: Exterior Lamp Condensation and Replacement Guidelines
    Vehicle: 1993 Plymouth Acclaim 2.5 L4 GAS

    Symptoms:
  • Leaks
  • Auto Systems:
  • Lighting, Horns, Turn Signals, Steering Column
  • CLICK HERE TO GET FULL ACCESS TO 1993 Plymouth Acclaim TECHNICAL SERVICE BULLETINS!

    COMPONENT/PARTS SPECIFICATIONS FOR 1993 Plymouth Acclaim AUTOMOBILES

    BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 1993 Plymouth Acclaim cars and light trucks sold in the U.S. and Canada from 1970+.

    • Brake caliper mounting bolt torque
    • Brake drum runout, machining, & discard specs
    • Minimum brake lining thickness.
    • Brake rotor runout, parallelism, machining, discard, & finish specs

    A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 1993 Plymouth Acclaim cars and light trucks sold in the U.S. and Canada from 1980+.

    • Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap

    COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.

    PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules

    QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 1993 Plymouth Acclaim cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.

    • Automatic transmission/transaxles capacities, lubricant recommendations
    • Differential/final drive capacities, lube recommendations, grades, & viscosities
    • Final drive fill & drain plug torques
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
    • Severe service maintenance & interval recommendations
    • Tire sizes, wheel nut/bolt torque, pressures & rim sizes
    • Transfer case capacities, lube recommendations, grades, & viscosities

    TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 1993 Plymouth Acclaim cars and light trucks sold in the U.S. and Canada from 1980+

    • Airflow sensor electrical specifications
    • Tensioning specifications for systems with automatic tensioners
    • Barometric pressure sensor specs
    • Battery group number and cranking performance
    • Crankshaft & camshaft position sensor resistance
    • Engine compression pressures
    • Coolant temperature sensor specs
    • Computer advance.
    • Diesel fuel temperature sensor resistance.
    • Distributor advance specifications
    • Ignition pickup coil resistance
    • Exhaust gas recirculation temperature sensor resistance
    • Engine fastener torque values
    • Firing order diagrams
    • Fuel system pressures
    • Generator (alternator) specs
    • Intake air temperature sensor specs
    • Ignition coil specifications
    • Fuel injector resistance
    • Engine idle speeds
    • Knock sensor resistance
    • Manifold absolute pressure sensor specs
    • Mixture control solenoid resistance
    • Voltage regulator specs
    • Spark plug applications & gaps
    • Starter motor electrical specs.
    • Tensioning specifications for systems without automatic tensioners
    • Throttle body temperature sensor resistance
    • Ignition timing in degrees at rpm
    • Transmission oil temperature sensor resistance
    • Throttle position sensor specs
    • Vacuum sensor valve specs

    CLICK HERE TO GET FULL ACCESS TO 1993 Plymouth Acclaim SPECIFICATIONS DATA!

    Shop online for auto body parts, engines, wheels, lights...

    Click here to view more details1992 Plymouth Acclaim Ignition Lock Cylinder, Keys included; A high quality, direct fit OE replacement ignition lock cylinder; With 2 years limited Trustbuilt warranty..

    Source: Auto Body Parts Store

    $56.21

    Click here to view more details about 1995 Plymouth Acclaim Headlight, Driver Side1995 Plymouth Acclaim Headlight, Driver Side, Bulbs included; Composite type; DOT and SAE approved; A high quality, OE replacement headlight assembly; Backed by 1-year, unlimited-mileage warranty..

    Source: Auto Body Parts Store

    $36.26

    Click here to view more details1995 Plymouth Acclaim Park Lamp Assembly Driver Side, Parklamp Assembly; Driver Side, , .

    Source: Wheels / Rims, Mirrors & Lights Store

    $7.45

    Click here to view more details1995 Plymouth Acclaim V6, 3 L, 2972 CC, 181 CID Rebuilt Engine, FWD, SOHC, roller cam., Warranty: 3-Year/100,000 Mile, .

    Source: Rebuilt Engines Store

    $2,349.00

    Click here to view more details1989 Plymouth Acclaim Used Wiper Motor Front, Very Good.

    Source: Used Auto Parts Store

    $66.00

    Click here to view more details1991 Plymouth Acclaim Used A/C Compressor, 3.0, AUTO, FWD 6-181 (3.0L), Very Good.

    Source: Used Auto Parts Store

    $111.00
    More parts
    Help me findSearch
    Auto Repair Quick Search
    Help me find
    Search DIY repair manuals by VIN...
    Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

    Find out what info we have for your vehicle

    Get the Complete Technical Service Bulletins!
    Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1993 Plymouth Acclaim vehicle.
    Access the Complete guide!
    Need To Fix Your Car or Truck?
    Save Money With Free Car Insurance Quote
    FREE car insurance quote
    Enter Zip Code:
    GOT A WEBSITE?Make money with Automotix

    Make money with Automotix Partner Program.

    Learn more

    Auto Repair Quick Search
    Help me find