Auto Parts Search


      Over 40 million used auto parts online. Shop online for auto and truck parts and save up to 75%

Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!
Help me findSearch
Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1993 Mazda Protege car and truck repair procedures including Mazda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 1993 Mazda Protege automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >

We have info for following modifications of 1993 Mazda Protege

  • 1993 Mazda Protege DX 1.8 L4 GAS, CC:1839, Fuel Injection
  • 1993 Mazda Protege LX 1.8 L4 GAS, CC:1839, Fuel Injection

A/C & HEATER SERVICE PROCEDURES FOR 1993 Mazda Protege AUTOMOBILES

Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1993 Mazda Protege cars and light trucks from 1990+

Mazda -> Automatic Temperature Control System Diagnosis & Testing -> Component Diagnosis & Testing -> 929 -> A/C AMPLIFIER -> A/C RELAY -> AIRFLOW MODE ACTUATOR -> AMBIENT TEMPERATURE SENSOR -> BLOWER RELAY -> CONDENSER FAN RELAYS -> EVAPORATOR SENSOR -> INTAKE ACTUATOR -> MAX-HI RELAY -> Millenia -> MIX ACTUATOR -> PASSENGER COMPARTMENT TEMPERATURE SENSOR -> POWER TRANSISTOR -> REFRIGERANT PRESSURE SWITCH -> SOLAR RADIATION SENSOR -> WATER TEMPERATURE SENSOR
Vehicle: 1993 Mazda Protege DX 1.8 L4 GAS

AMBIENT TEMPERATURE SENSOR

  • Disconnect ambient temperature sensor connector.
  • Measure resistance between terminals of sensor, then measure temperature around sensor.
  • If resistance is not as shown in Fig. , replace ambient temperature sensor.

SOLAR RADIATION SENSOR

If service (trouble) code 02 was indicated during self-diagnosis, check wiring harness for an open/short circuit or disconnection of sensor. If no defect is found in wiring harness or connector, replace solar radiation sensor.

EVAPORATOR SENSOR

  • Re...

CLICK HERE TO GET FULL ACCESS TO 1993 Mazda Protege A/C & HEATER SERVICE PROCEDURES

A/C & HEATER SERVICE PROCEDURES FOR 1993 Mazda Protege AUTOMOBILES

Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1993 Mazda Protege cars and light trucks from 1990+

Electrical Symbol & Wire Color Code Identification -> Electrical Symbol Identification -> Imported Vehicles
Vehicle: 1993 Mazda Protege DX 1.8 L4 GAS

[[table data]]

CLICK HERE TO GET FULL ACCESS TO 1993 Mazda Protege A/C & HEATER SERVICE PROCEDURES

A/C & HEATER SERVICE PROCEDURES FOR 1993 Mazda Protege AUTOMOBILES

Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1993 Mazda Protege cars and light trucks from 1990+

Mazda -> Component Replacement & Adjustment -> Adjustments -> 1993 -> 1993-94 -> 1994 -> 1995 -> Air Intake Control -> Air Mix Control -> Airflow Mode Control -> Control Wires -> Function Control -> MIATA -> Mix Control -> Mode Control -> MPV -> MX-3 -> PICKUPS -> PROTEGE & 323 -> Rec/Fresh Air Selector -> Recirculated-Fresh Air Selector -> Temperature Control
Vehicle: 1993 Mazda Protege DX 1.8 L4 GAS

For Navajo procedures, refer to Ford Explorer .

Control Wires

MIATA
Airflow Mode Control
  • Set airflow mode control lever to VENT position.
  • Connect and clamp cable with shutter lever on heater unit at its closest point, Fig. .
  • Ensure lever moves fully from side to side.
Temperature Control
  • Set temperature blend lever to maximum HOT position.
  • Connect and clamp cable with shutter lever on heater unit far to the right as possible, Fig. .
  • Ensure lever moves fully from side to side.
Rec/Fresh ...

CLICK HERE TO GET FULL ACCESS TO 1993 Mazda Protege A/C & HEATER SERVICE PROCEDURES

A/C & HEATER SERVICE PROCEDURES FOR 1993 Mazda Protege AUTOMOBILES

Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1993 Mazda Protege cars and light trucks from 1990+

Air Bag System Precautions -> Mazda -> Disarming -> 1990-93 -> 1994-96 -> 1997-2001 -> 2002-04
Vehicle: 1993 Mazda Protege LX 1.8 L4 GAS

NOTE: For B2300, B3000 And B4000, Refer To "Ranger" In "Ford Motor Co."

NOTE: For Tribute, Refer To "Escape" In "Ford Motor Co."

1990-93
  • On 929 models, refer to "1994-96."
  • On models equipped with audio anti-theft, obtain audio unit anti-theft code number from vehicle owner.
  • On all models, disconnect battery ground cable.
  • On Miata models, disconnect orange and blue air bag clockspring connectors, Fig. .
  • On 626, MX-6 and RX-7 models, remove lower lefthand sound insulator from instrument panel, then disconnect clockspring orange and blue connectors, Figs...

CLICK HERE TO GET FULL ACCESS TO 1993 Mazda Protege A/C & HEATER SERVICE PROCEDURES

A/C & HEATER SERVICE PROCEDURES FOR 1993 Mazda Protege AUTOMOBILES

Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1993 Mazda Protege cars and light trucks from 1990+

Imported Cars & Light Trucks & Vans -> 1993-95 -> Leak Test -> Electronic Leak Detectors -> Flame-Type (Halide) Leak Detectors -> Fluid Leak Detectors
Vehicle: 1993 Mazda Protege DX 1.8 L4 GAS

Testing the refrigerant system for leaks is one of the most important phases of troubleshooting. One or more of the methods outlined will prove useful in detecting leaks or checking connections if service work is performed. Before beginning any leak test, attach a manifold gauge set and note pressure. If little or no pressure is indicated, a partial charge must be installed. Check all connections, compressor head gasket, oil filler plug and compressor shaft seal for leaks.

R-12 leak detectors will not detect R-134a leaks. For R-134a system an electronic type leak detector i...

CLICK HERE TO GET FULL ACCESS TO 1993 Mazda Protege A/C & HEATER SERVICE PROCEDURES

A/C & HEATER SERVICE PROCEDURES FOR 1993 Mazda Protege AUTOMOBILES

Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 1993 Mazda Protege cars and light trucks from 1990+

Mazda -> Component Replacement & Adjustment -> Thermostat, Replace -> 1993 -> 1993-94 -> 1994 -> 1995 -> 2.3L/4-140 Engine -> 3.0L/V6-182 & 4.0L/V6-245 Engines -> 929 -> MIATA & MX-3 -> MILLENIA -> MPV -> MX-6 & 626 -> PICKUPS -> PROTEGE & 323 -> RX-7
Vehicle: 1993 Mazda Protege DX 1.8 L4 GAS

For Navajo procedures, refer to Ford Explorer .

MIATA & MX-3

  • Drain engine coolant from radiator assembly.
  • Disconnect radiator hose from water pipe and thermostat housing assembly, located at the rear of the engine, above the transaxle.
  • Disconnect two heater hoses from the rear of the water pipe and thermostat housing, then remove two bolts retaining the assembly to the engine block.
  • Remove two thermostat housing cover retaining bolts, then thermostat.
  • Clean gasket material from mating surfaces.
  • Reverse procedure to install.
...

CLICK HERE TO GET FULL ACCESS TO 1993 Mazda Protege A/C & HEATER SERVICE PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

Click here to view more details about 1996 Mazda Protege Alternator1996 Mazda Protege Alternator, Clockwise Rotation, S4 Pulley, Uses Only New Components, Meets Or Exceeds All OEM Specifications, With NSA's Limited 2-Year Warranty.

Source: Auto Body Parts Store

$113.17

Click here to view more details1997 Mazda Protege Automatic Transmission Filter, Includes O-ring and pan gasket with 19 bolt holes; A high quality, direct fit OE replacement automatic transmission filter kit; With 2 years limited Trustbuilt warranty..

Source: Auto Body Parts Store

$17.87

Click here to view more details about 1994 Mazda Protege 14" Wheel Cover1994 Mazda Protege 14" Wheel Cover, Wheel Cover; 13 Inch; 7 Slots; Silver, , .

Source: Wheels / Rims, Mirrors & Lights Store

$31.50

Click here to view more details1997 Mazda Protege SE L4, 1.5 L, 1489 CC Rebuilt Engine, Warranty: 3-Year/100,000 Mile, .

Source: Rebuilt Engines Store

Ad Hoc

Click here to view more details2000 Mazda Protege Used Air Flow Meter/Sensor, 2.0, AUTO, FWD, Very Good.

Source: Used Auto Parts Store

$77.00

Click here to view more details1995 Mazda Protege Used Heater and A/C controls, lever cont, VIN JM1BA, Very Good.

Source: Used Auto Parts Store

$86.00
More parts
Help me findSearch
Auto Repair Quick Search
Help me find
Search DIY repair manuals by VIN...
Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

Find out what info we have for your vehicle

Get the Complete Technical Service Bulletins!
Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1993 Mazda Protege vehicle.
Access the Complete guide!
Need To Fix Your Car or Truck?
Save Money With Free Car Insurance Quote
FREE car insurance quote
Enter Zip Code:
GOT A WEBSITE?Make money with Automotix

Make money with Automotix Partner Program.

Learn more

Auto Repair Quick Search
Help me find