Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1992 Lexus SC300 car and truck
repair procedures including Lexus engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1992 Lexus SC300 automobile. Try the Automotix DIY solution today!
MAINTENANCE LAMP RESET PROCEDURES FOR 1992 Lexus SC300 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1992 Lexus SC300 cars and light trucks sold in the U.S. from 1990+.
Lexus -> Low Coolant Lamp ->
Vehicle: 1992 Lexus SC300 3.0 L6 GAS
This lamp will be illuminated when the coolant level in the radiator drops below a pre-determined point. To reset the lamp, bring the c...
CLICK HERE TO GET FULL ACCESS TO 1992 Lexus SC300 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1992 Lexus SC300 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1992 Lexus SC300 cars and light trucks sold in the U.S. from 1990+.
Lexus -> Overdrive (O/D) Indicator Lamp ->
Vehicle: 1992 Lexus SC300 3.0 L6 GAS
The automatic transmission electrical system possesses internal self-diagnostic capabilities. If a fault occurs within the system, the Electronic Control Module (ECM) stores a diagnostic trouble code and the "... "
CLICK HERE TO GET FULL ACCESS TO 1992 Lexus SC300 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1992 Lexus SC300 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1992 Lexus SC300 cars and light trucks sold in the U.S. from 1990+.
Lexus -> Anti-Lock Brake System (ABS)/VSA System Warning Lamp -> 1990-2006
Vehicle: 1992 Lexus SC300 3.0 L6 GAS
The anti-lock warning lamp is used to warn of an anti-lock brake system fault. The lamp will be lit during engine start-up, but should go out when the self-diagnostic system determines that the anti-lock system is functioning properly. If the lamp remains lit, an anti-lock fault is indicated. After diagnosis and repair are complete, the lamp may be reset as follows:
- Place ignition switch in On position.
- On models except GX470, 2002-03 ES300, IS300, LS430, LX470, SC430 and 2004-06 ES330 and RX330 models, connect jumper tool No. 09843-18020, or equivalent, betwe...
CLICK HERE TO GET FULL ACCESS TO 1992 Lexus SC300 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1992 Lexus SC300 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1992 Lexus SC300 cars and light trucks sold in the U.S. from 1990+.
Lexus -> Malfunction Indicator Lamp (MIL) ->
Vehicle: 1992 Lexus SC300 3.0 L6 GAS
On some models equipped with OBD II, the MIL will also illuminate if the fuel tank filler cap is not properly tightened. Tighten fuel tank filler cap until it clicks.
On some models equipped with OBD II, if a misfire condition which may cause damage to the catalytic converter is present, the Check engine lamp will flash once per second until vehicle operation is outside the speed and load range causing the misfire. The lamp will stop flashing and remain steady
On all models, the MIL should light when the ignition switch is placed in the On position without starting the engine. When the engine is...
CLICK HERE TO GET FULL ACCESS TO 1992 Lexus SC300 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1992 Lexus SC300 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1992 Lexus SC300 cars and light trucks sold in the U.S. from 1990+.
Lexus -> Lexus Ride Control (LRC) Indicator Lamp ->
Vehicle: 1992 Lexus SC300 3.0 L6 GAS
The electronic modulated air suspension system has internal self-diagnostic capabilities. When the ignition switch is placed in the On position, the LRC indicator lamp should light for approximately 2 seconds. If the lamp flashes continuously at 1 second intervals, the Electronic Control Unit (ECU) has stored a diagnostic trouble code.
Following diagnosis a...
CLICK HERE TO GET FULL ACCESS TO 1992 Lexus SC300 MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1992 Lexus SC300 AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 1992 Lexus SC300 cars and light trucks sold in the U.S. from 1990+.
Lexus -> Air Bag Warning Lamp -> 1992-2000 SC300
Vehicle: 1992 Lexus SC300 3.0 L6 GAS
The air bag system warning lamp warns of air bag system faults. The lamp will be lit when the ignition switch is placed in the Accessory or On positions, but should go out when the self-diagnostic system determines that no faults are present. If the lamp remains lit or flashes, a system fault is indicated. Air bag system diagnosis and repair procedures must be completed before the warning lamp can be reset.
Reset warning lamp as follows:
- Connect service wires to check connec...
CLICK HERE TO GET FULL ACCESS TO 1992 Lexus SC300 MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1992 Lexus SC300 vehicle.
|
| Access the Complete guide! |
