Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1992 GEO Metro car and truck
repair procedures including GEO engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1992 GEO Metro automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1992 GEO Metro
- 1992 GEO Metro LSI 1.0 L3 GAS, CC:993, CID:61, Fuel Injection, Aspiration:61, Engine VIN:, Desg:6
- 1992 GEO Metro XFI 1.0 L3 GAS, CC:993, CID:61, Fuel Injection, Aspiration:61, Engine VIN:, Desg:6
- 1992 GEO Metro 1.0 L3 GAS, CC:993, CID:61, Fuel Injection, Aspiration:61, Engine VIN:, Desg:6
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1992 GEO Metro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1992 GEO Metro cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Drive axle -> Intermediate shaft
Vehicle: 1992 GEO Metro LSI 1.0 L3 GAS
Drive axle
- Raise and support vehicle.
- On models with ABS, remove ABS wheel speed sensor.
- On all models, remove wheel and tire assembly.
- Unstake, then remove driveshaft nut and washer.
- Remove ball joint pinch bolt, then pry ball joint from knuckle.
- On models except sedan, pry inboard driveshaft joints from transaxle using a pry bar or large screwdriver.
- On sedan models, remove drive axle as follows:
- Pry lefthand side inboard driveshaft joint from transaxle using a large screwdriver.
- Using a suitable soft mallet, tap at base of right inner joint to remove from intermediate driveshaf...
CLICK HERE TO GET FULL ACCESS TO 1992 GEO Metro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1992 GEO Metro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1992 GEO Metro cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Drive axle -> Intermediate shaft
Vehicle: 1992 GEO Metro XFI 1.0 L3 GAS
Drive axle
- Raise and support vehicle.
- On models with ABS, remove ABS wheel speed sensor.
- On all models, remove wheel and tire assembly.
- Unstake, then remove driveshaft nut and washer.
- Remove ball joint pinch bolt, then pry ball joint from knuckle.
- On models except sedan, pry inboard driveshaft joints from transaxle using a pry bar or large screwdriver.
- On sedan models, remove drive axle as follows:
- Pry lefthand side inboard driveshaft joint from transaxle using a large screwdriver.
- Using a suitable soft mallet, tap at base of right inner joint to remove from intermediate driveshaf...
CLICK HERE TO GET FULL ACCESS TO 1992 GEO Metro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1992 GEO Metro AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1992 GEO Metro cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Drive axle -> Intermediate shaft
Vehicle: 1992 GEO Metro 1.0 L3 GAS
Drive axle
- Raise and support vehicle.
- On models with ABS, remove ABS wheel speed sensor.
- On all models, remove wheel and tire assembly.
- Unstake, then remove driveshaft nut and washer.
- Remove ball joint pinch bolt, then pry ball joint from knuckle.
- On models except sedan, pry inboard driveshaft joints from transaxle using a pry bar or large screwdriver.
- On sedan models, remove drive axle as follows:
- Pry lefthand side inboard driveshaft joint from transaxle using a large screwdriver.
- Using a suitable soft mallet, tap at base of right inner joint to remove from intermediate driveshaf...
CLICK HERE TO GET FULL ACCESS TO 1992 GEO Metro DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1992 GEO Metro vehicle.
|
| Access the Complete guide! |
