Auto Parts Search


      Over 40 million used auto parts online. Shop online for auto and truck parts and save up to 75%

1992 Buick Park Avenue CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Buick REPAIR SHOPS DON'T WANT YOU TO KNOW

Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!

    Automotive Domain Names

    Help me findSearch

    Select Section

    Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1992 Buick Park Avenue car and truck repair procedures including Buick engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your Buick Park Avenue automobile. Try the Automotix DIY solution today!
    DIY REPAIR SAMPLES > CONTINUE EXPLORING >
    Using the Automotix DIY repair procedures will save you hundreds and even thousands of dollars! In addition, it will save you hours of touring the city searching for Buick mechanics you can trust. The Automotix DIY solution is particularly affordable. A full access to the entire DIY repair procedures and diagrams for your 1992 Buick Park Avenue vehicle will cost less than a single gallon of gas. Here are some of the DIY repair tips and procedures you will find here:

    A/C & HEATER SERVICE PROCEDURES FOR 1992 Buick Park Avenue AUTOMOBILES

    Cooling Fans -> Passenger Cars Except Saturn -> ELDORADO & SEVILLE -> 4.6L Engine -> 4.9L Engine -> COMPONENT REPLACEMENT -> Coolant Fan, Replace -> DESCRIPTION -> HIGH SPEED CONDITIONS -> HIGH SPEED OPERATION -> LOW SPEED CONDITIONS -> LOW SPEED OPERATION -> SYSTEM DIAGNOSIS & TESTING
    Vehicle: 1992 Buick Park Avenue 3.8 V6 GAS

    DESCRIPTION

    The powertrain control module (PCM) controls both cooling fans by controlling three relays through two outputs. There are two modes of cooling fan operation, low speed and high speed. In the low speed mode the cooling fans are powered in series, cooling fan relay 1 is energized by the PCM and both cooling fans run at low speed. In the high speed mode the cooling fans are powered in parallel which allows the fans to run at high speed. Cooling fans operate only when the ignition is in run.

    SYSTEM DIAGNOSIS & TESTING

    LOW SPEED CONDITIONS
    4...

    CLICK HERE TO GET FULL ACCESS TO 1992 Buick Park Avenue A/C & HEATER SERVICE PROCEDURES

    BRAKE SERVICE PROCEDURES FOR 1992 Buick Park Avenue AUTOMOBILES

    Disc Brakes -> AC-Delco Single Piston Front Disc Brake (Type 2) -> Precautions
    Vehicle: 1992 Buick Park Avenue Ultra 3.8 V6 GAS

    • Grease or any other foreign material must be kept off the brake linings, caliper, surfaces of the disc and external surfaces of the hub, during service procedures. Handling the brake disc and caliper should be done in a way to avoid deformation of the disc and nicking or scratching brake linings.
    • If inspection reveals rubber piston seals are worn or damaged, they should be replaced immediately.
    • During removal and installation of a wheel assembly, exercise care so as not to interfere wi...

    CLICK HERE TO GET FULL ACCESS TO 1992 Buick Park Avenue BRAKE SERVICE PROCEDURES

    FUEL FILTER REPLACEMENT PROCEDURES FOR 1992 Buick Park Avenue AUTOMOBILES

    General Motors Corp./Saturn Passenger Cars -> Fuel Filter Scheduled Maintenance -> 1980-06 Gasoline Engine Models Except Catera, LeMans (1988-93) Metro, Nova (1985-88), Saturn & Sprint -> Normal Service -> Severe Service
    Vehicle: 1992 Buick Park Avenue Ultra 3.8 V6 GAS

    CLICK HERE TO GET FULL ACCESS TO 1992 Buick Park Avenue FUEL FILTER REPLACEMENT PROCEDURES

    DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1992 Buick Park Avenue AUTOMOBILES

    CV AXLE SHAFT, Replace
    Vehicle: 1992 Buick Park Avenue 3.8 V6 GAS

    • Raise and support vehicle, then remove tire and wheel assembly.
    • Install a brass drift or a screwdriver to prevent rotor from turning.
    • Remove shaft nut and washer.
    • Remove brake caliper from steering knuckle and suspend caliper assembly.
    • Remove rotor from hub and bearing assembly, then stabilizer shaft or link from control arm.
    • Remove ball joint from steering knuckle.
    • Remove drive axle from transaxle using axle shaft remover tool No. J-33008, a...

    CLICK HERE TO GET FULL ACCESS TO 1992 Buick Park Avenue DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

    STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1992 Buick Park Avenue AUTOMOBILES

    Starter, Replace
    Vehicle: 1992 Buick Park Avenue 3.8 V6 GAS

    When removing starter, note if any shims are used between starter and mounting surface. If shims are found, reinstall in original locations.

    If starter is noisy during cranking, remove one .015 inch double shim or add one .015 inch single shim to outer bolt. If starter makes a high pitched whine after engine start, add .015 inch double shims until noise ceases.

    • Disconnect batter...

    CLICK HERE TO GET FULL ACCESS TO 1992 Buick Park Avenue STARTER & ALTERNATOR REPLACEMENT PROCEDURES

    MAINTENANCE LAMP RESET PROCEDURES FOR 1992 Buick Park Avenue AUTOMOBILES

    General Motors Corp./Saturn Cars -> Check Gauge Warning Lamp ->
    Vehicle: 1992 Buick Park Avenue Ultra 3.8 V6 GAS

    The Check Gauge warning lamp will light to warn the driver to inspect the oil pressure gauge, engine coolant temperature ga...

    CLICK HERE TO GET FULL ACCESS TO 1992 Buick Park Avenue MAINTENANCE LAMP RESET PROCEDURES

    RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1992 Buick Park Avenue AUTOMOBILES

    Coolant Hose, Replace -> Lower -> Upper
    Vehicle: 1992 Buick Park Avenue Ultra 3.8 V6 GAS

    Lower

    • Drain cooling system into a suitable container.
    • Reposition hose clamp from radiator using hose clamp pliers.
    • Remove radiator outlet hose from radiator.
    • Reposition hose clamp from water pump housing using hose clamp pliers.
    • Remove radiator outlet hose from water pump housing and from vehicle.
    • Reverse procedure to i...

    CLICK HERE TO GET FULL ACCESS TO 1992 Buick Park Avenue RADIATOR & HOSE REPLACEMENT PROCEDURES

    SERPENTINE BELT SERVICE PROCEDURES FOR 1992 Buick Park Avenue AUTOMOBILES

    Serpentine Drive Belt, Replace
    Vehicle: 1992 Buick Park Avenue Ultra 3.8 V6 GAS

    • Remove the battery.
    • Rotate the tensioner counterclockwise to remove the drive belt.
    • Remove the supercharger belt from...

    CLICK HERE TO GET FULL ACCESS TO 1992 Buick Park Avenue SERPENTINE BELT SERVICE PROCEDURES

    COMPONENT LOCATION DIAGRAMS FOR 1992 Buick Park Avenue AUTOMOBILES

    Component location diagrams for most 1992 Buick Park Avenue cars and light trucks sold in the U.S. from 1990+.

    Middle Of LH Shroud Diagram for 1992 Buick Park Avenue Ultra 3.8 V6 GASMiddle Of LH Shroud Diagram for 1992 Buick Park Avenue Ultra 3.8 V6 GAS

    Components on diagram:
  • Park Brake Switch
  • Lower Rear Side Of Front Door Diagram for 1992 Buick Park Avenue  3.8 V6 GASLower Rear Side Of Front Door Diagram for 1992 Buick Park Avenue 3.8 V6 GAS

    Components on diagram:
  • Safety Belt Lap Retractor Solenoids
  • Safety Belt Shoulder Retractor Solenoids
  • CLICK HERE TO GET FULL ACCESS TO 1992 Buick Park Avenue PARTS/COMPONENTS LOCATION DIAGRAMS!

    WIRING DIAGRAMS FOR 1992 Buick Park Avenue AUTOMOBILES

    OEM drawn wiring diagrams for most 1992 Buick Park Avenue cars and light trucks sold in the U.S.

    1992 Buick Park Avenue  3.8 V6 GAS Wiring Diagram1992 Buick Park Avenue 3.8 V6 GAS Wiring Diagram

    Components on diagram:
  • Remote Accessory Control (RAC) Module
  • Horn Relay
  • RH Front Door Lock Cylinder Switch
  • Luggage Compartment Lid Tamper Switch
  • LH Front Door Lock Switch
  • 1992 Buick Park Avenue Ultra 3.8 V6 GAS Wiring Diagram1992 Buick Park Avenue Ultra 3.8 V6 GAS Wiring Diagram

    Components on diagram:
  • Remote Accessory Control Module
  • Relay Center
  • Horn Relay
  • RH Horn
  • Horn Switch
  • CLICK HERE TO GET FULL ACCESS TO 1992 Buick Park Avenue WIRING DIAGRAMS!

    TECHNICAL SERVICE BULLETINS FOR 1992 Buick Park Avenue AUTOMOBILES

    OEM TSB listings for most 1992 Buick Park Avenue cars and light trucks sold in the U.S. from 1985+.

    Document: Car and Truck Fix It Right the First Time Issues
    Vehicle: 1992 Buick Park Avenue 3.8 V6 GAS

    Auto Systems:
  • Labor Times, Manuals, Warranty, Aids
  • Document: GM TIRE WARRANTY PROGRAM CLAIMS GOODWILL GUIDELINES - REVISED
    Vehicle: 1992 Buick Park Avenue 3.8 V6 GAS

    Auto Systems:
  • Labor Times, Manuals, Warranty, Aids
  • Wheels, Tires, Wheel Bearings, Seals, Hubs
  • CLICK HERE TO GET FULL ACCESS TO 1992 Buick Park Avenue TECHNICAL SERVICE BULLETINS!

    COMPONENT/PARTS SPECIFICATIONS FOR 1992 Buick Park Avenue AUTOMOBILES

    BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 1992 Buick Park Avenue cars and light trucks sold in the U.S. and Canada from 1970+.

    • Brake caliper mounting bolt torque
    • Brake drum runout, machining, & discard specs
    • Minimum brake lining thickness.
    • Brake rotor runout, parallelism, machining, discard, & finish specs

    A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 1992 Buick Park Avenue cars and light trucks sold in the U.S. and Canada from 1980+.

    • Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap

    COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.

    PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules

    QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 1992 Buick Park Avenue cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.

    • Automatic transmission/transaxles capacities, lubricant recommendations
    • Differential/final drive capacities, lube recommendations, grades, & viscosities
    • Final drive fill & drain plug torques
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
    • Severe service maintenance & interval recommendations
    • Tire sizes, wheel nut/bolt torque, pressures & rim sizes
    • Transfer case capacities, lube recommendations, grades, & viscosities

    TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 1992 Buick Park Avenue cars and light trucks sold in the U.S. and Canada from 1980+

    • Airflow sensor electrical specifications
    • Tensioning specifications for systems with automatic tensioners
    • Barometric pressure sensor specs
    • Battery group number and cranking performance
    • Crankshaft & camshaft position sensor resistance
    • Engine compression pressures
    • Coolant temperature sensor specs
    • Computer advance.
    • Diesel fuel temperature sensor resistance.
    • Distributor advance specifications
    • Ignition pickup coil resistance
    • Exhaust gas recirculation temperature sensor resistance
    • Engine fastener torque values
    • Firing order diagrams
    • Fuel system pressures
    • Generator (alternator) specs
    • Intake air temperature sensor specs
    • Ignition coil specifications
    • Fuel injector resistance
    • Engine idle speeds
    • Knock sensor resistance
    • Manifold absolute pressure sensor specs
    • Mixture control solenoid resistance
    • Voltage regulator specs
    • Spark plug applications & gaps
    • Starter motor electrical specs.
    • Tensioning specifications for systems without automatic tensioners
    • Throttle body temperature sensor resistance
    • Ignition timing in degrees at rpm
    • Transmission oil temperature sensor resistance
    • Throttle position sensor specs
    • Vacuum sensor valve specs

    CLICK HERE TO GET FULL ACCESS TO 1992 Buick Park Avenue SPECIFICATIONS DATA!

    Shop online for auto body parts, engines, wheels, lights...

    Click here to view more details about 2004 Buick Park Avenue Grille Assembly2004 Buick Park Avenue Grille Assembly, With emblem provision, chrome frame, and black grille insert; A high quality, OE replacement complete grille and shell assembly; Backed by 1-year, unlimited-mileage warranty..

    Source: Auto Body Parts Store

    $97.93

    Click here to view more details about 2005 Buick Park Avenue Bumper Trim, Front, Driver Side2005 Buick Park Avenue Bumper Trim, Front, Driver Side, Made from tough impact-resistant plastic for maximum durability and tensile strength; Built to exact OE quality, fit, and finish..

    Source: Auto Body Parts Store

    $48.31

    Click here to view more details1996 Buick Park Avenue Side Marker, Passenger Side, SIDE MARKER, RH, W/CORNER LAMP , , .

    Source: Wheels / Rims, Mirrors & Lights Store

    $22.45

    Click here to view more details1998 Buick Park Avenue Ultra V6, 3.8 L, 231 CID Rebuilt Engine, Warranty: 7-Year/70,000 Mile, .

    Source: Rebuilt Engines Store

    $2,075.00

    Click here to view more details1994 Buick Park Avenue Used Ignition Switch W/Key, Without opt WA2, Very Good.

    Source: Used Auto Parts Store

    $61.00

    Click here to view more details2000 Buick Park Avenue Used Air Flow Meter/Sensor, 3.8, AUTO, FWD (6-231, 3.8L), Very Good.

    Source: Used Auto Parts Store

    $107.00
    More parts
    Help me findSearch
    Auto Repair Quick Search
    Help me find
    Search DIY repair manuals by VIN...
    Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

    Find out what info we have for your vehicle

    Get the Complete Technical Service Bulletins!
    Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1992 Buick Park Avenue vehicle.
    Access the Complete guide!
    Need To Fix Your Car or Truck?
    Save Money With Free Car Insurance Quote
    FREE car insurance quote
    Enter Zip Code:
    GOT A WEBSITE?Make money with Automotix

    Make money with Automotix Partner Program.

    Learn more

    Auto Repair Quick Search
    Help me find