1992 Acura Integra REPAIR MANUAL -- HOW TO FIX YOUR CAR OR TRUCK

Auto Parts Search


1992 Acura Integra CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Acura REPAIR SHOPS DON'T WANT YOU TO KNOW

Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!

Help me findSearch

Select Section

Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1992 Acura Integra car and truck repair procedures including Acura engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your Acura Integra automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >
Using the Automotix DIY repair procedures will save you hundreds and even thousands of dollars! In addition, it will save you hours of touring the city searching for Acura mechanics you can trust. The Automotix DIY solution is particularly affordable. A full access to the entire DIY repair procedures and diagrams for your 1992 Acura Integra vehicle will cost less than a single gallon of gas. Here are some of the DIY repair tips and procedures you will find here:

A/C & HEATER SERVICE PROCEDURES FOR 1992 Acura Integra AUTOMOBILES

Electrical Symbol & Wire Color Code Identification -> Wire Color Code Identification -> Imported Vehicles
Vehicle: 1992 Acura Integra LS 1.8 L4 GAS

[[table data]] [[table data]]

CLICK HERE TO GET FULL ACCESS TO 1992 Acura Integra A/C & HEATER SERVICE PROCEDURES

BRAKE SERVICE PROCEDURES FOR 1992 Acura Integra AUTOMOBILES

ACURA, ANTI-LOCK BRAKE SYSTEM -> SYSTEM SERVICE -> RELIEVING ACCUMULATOR/LINE PRESSURE -> SYSTEM BLEEDING
Vehicle: 1992 Acura Integra GSR 1.7 L4 GAS

SYSTEM BLEEDING

  • Disconnect 6-P inspection connector at crossmember under front passenger seat, then connect inspection connector to ALB checker.
  • Place vehicle on level surface, then block wheels. On models equipped with manual transaxle, place in Neutral. On models equipped with automatic transaxle, place in Park.
  • Using suitable brake fluid, fill modulator reservoir to MAX level.
  • Using tool No. 07HAA-SG00100 or equivalent, bleed high pressure fluid from maintenance bleeder, Fig. and . Do not reuse brake fluid.
  • On all 1989-90 models and 1991-92 Integra models start engine, then release...

CLICK HERE TO GET FULL ACCESS TO 1992 Acura Integra BRAKE SERVICE PROCEDURES

FUEL FILTER REPLACEMENT PROCEDURES FOR 1992 Acura Integra AUTOMOBILES

Acura -> Component Locations -> 1986-95 Integra
Vehicle: 1992 Acura Integra RS 1.8 L4 GAS

Refer to Fig...

CLICK HERE TO GET FULL ACCESS TO 1992 Acura Integra FUEL FILTER REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1992 Acura Integra AUTOMOBILES

CV AXLE SHAFT, Replace -> Driveshaft -> Intermediate shaft
Vehicle: 1992 Acura Integra RS 1.8 L4 GAS

Driveshaft

  • Raise and support front of vehicle.
  • Remove front wheel, then drain transaxle fluid into a suitable container. If removing left driveshaft only, it is not necessary to drain transaxle.
  • Raise spindle nut lock tab and remove nut.
  • Remove damper fork bolt and pinch bolt, then damper fork.
  • Remove steering knuckle to lower control arm castellated nut cotter pin and nut.
  • Separate lower control arm from steering knuckle using a suitable puller.
  • Pull steering knuckle outward and tap driveshaft outboard joint from steering knuckle.
  • Pry driveshaft out with a screwdriver to force s...

CLICK HERE TO GET FULL ACCESS TO 1992 Acura Integra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1992 Acura Integra AUTOMOBILES

Alternator, Replace
Vehicle: 1992 Acura Integra GS 1.8 L4 GAS

  • Remove left driveshaft.
  • Disconnect battery ground cable at battery.
  • Disconnect alternator connector from alternator.
  • Remove terminal nut and WHT wire from B terminal.
  • Remove three mounting bracket bolts and mounting bracket.
  • Remove adjusting nut and upper mounting bolt, then pull out alternator.
  • Loosen adjusting nut, then remove mounting nut.
  • Remove alternator belt from alternator pulley.
  • Remov...

CLICK HERE TO GET FULL ACCESS TO 1992 Acura Integra STARTER & ALTERNATOR REPLACEMENT PROCEDURES

MAINTENANCE LAMP RESET PROCEDURES FOR 1992 Acura Integra AUTOMOBILES

Acura -> Check Engine/Malfunction Indicator (MIL)/PGM-FI Warning Indicator Lamp -> 1990-2001 Integra
Vehicle: 1992 Acura Integra RS 1.8 L4 GAS

The Check Engine/PGM-FI Warning Indicator Lamp should be illuminated for approximately 2 seconds after the ignition switch is placed in the on position as a bulb check. After approximately 2 seconds, the lamp should go off. If the lamp remains lit, a problem in the Programmed Fuel Injection (PGM-FI) system is indicated and a diagnostic trouble code is stored in the Electronic Control Unit (ECU) memory. After diagnosis and repair, clear the ECU memory of diagnostic trouble codes.

After di...

CLICK HERE TO GET FULL ACCESS TO 1992 Acura Integra MAINTENANCE LAMP RESET PROCEDURES

RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1992 Acura Integra AUTOMOBILES

Coolant Hose, Replace -> Lower -> Upper
Vehicle: 1992 Acura Integra GS 1.8 L4 GAS

Lower

  • Disconnect battery ground cable.
  • Drain cooling system into a suitable container by loosening drain plug of radiator.
  • Reposition hose clamp at radiator outlet.
  • Remove hose from radiator.
  • Reposition hose clamp at water inlet.
  • Remove hose from water inlet.
  • Remove hose from vehicle.
  • Reverse procedure to inst...

CLICK HERE TO GET FULL ACCESS TO 1992 Acura Integra RADIATOR & HOSE REPLACEMENT PROCEDURES

SERPENTINE BELT SERVICE PROCEDURES FOR 1992 Acura Integra AUTOMOBILES

Serpentine Drive Belt, Replace -> Air Conditioning -> Alternator -> Power Steering
Vehicle: 1992 Acura Integra RS 1.8 L4 GAS

Alternator

  • Disconnect battery ground cable from battery.
  • Loosen upper mounting nut.
  • Loosen lower mounting bolt and adjustment locknut.
  • Remove A/C compressor drive and alternator drive belt.
  • Clean and inspect belt surfaces of all pulleys.
  • Reverse procedure to install, noting the following:
    • Torque upper alternator adjusting nut to 17 ft. lbs.
    • Torque lower alternator adjusting nut to 33 ft. lbs.

Air Conditioning

  • Disconnect battery ground cable from battery.
  • Loosen adjust pulley bracket pivot bolt and adjusting bolt.
  • Remove A/C compressor drive belt from pulleys.
  • On models equippe...

CLICK HERE TO GET FULL ACCESS TO 1992 Acura Integra SERPENTINE BELT SERVICE PROCEDURES

COMPONENT LOCATION DIAGRAMS FOR 1992 Acura Integra AUTOMOBILES

Component location diagrams for most 1992 Acura Integra cars and light trucks sold in the U.S. from 1990+.

Engine Compartment Connectors & Grounds Diagram for 1992 Acura Integra RS 1.8 L4 GASEngine Compartment Connectors & Grounds Diagram for 1992 Acura Integra RS 1.8 L4 GAS

Components on diagram:
  • Connector C-206
  • Connector C-207
  • Connector C-221
  • Connector C-222
  • Connector C-223
  • Cruise Control Components Diagram for 1992 Acura Integra RS 1.8 L4 GASCruise Control Components Diagram for 1992 Acura Integra RS 1.8 L4 GAS

    Components on diagram:
  • Shift Lever Position Switch
  • Clutch Switch
  • Brake Lamp Switch
  • Cruise Control Unit
  • Cruise Control Actuator Assembly
  • CLICK HERE TO GET FULL ACCESS TO 1992 Acura Integra PARTS/COMPONENTS LOCATION DIAGRAMS!

    WIRING DIAGRAMS FOR 1992 Acura Integra AUTOMOBILES

    OEM drawn wiring diagrams for most 1992 Acura Integra cars and light trucks sold in the U.S.

    1992 Acura Integra GSR 1.7 L4 GAS Wiring Diagram1992 Acura Integra GSR 1.7 L4 GAS Wiring Diagram

    Components on diagram:
  • Rear Window Defogger Relay
  • Power Window Relay
  • 1992 Acura Integra RS 1.8 L4 GAS Wiring Diagram1992 Acura Integra RS 1.8 L4 GAS Wiring Diagram

    Components on diagram:
  • Rear Window Defogger Relay
  • Moonroof Relay
  • Power Mirror Switch
  • Power Antenna Motor
  • Rear Window Defogger Switch
  • CLICK HERE TO GET FULL ACCESS TO 1992 Acura Integra WIRING DIAGRAMS!

    TECHNICAL SERVICE BULLETINS FOR 1992 Acura Integra AUTOMOBILES

    OEM TSB listings for most 1992 Acura Integra cars and light trucks sold in the U.S. from 1985+.

    Document: Battery Maintenance at Dealers
    Vehicle: 1992 Acura Integra LS 1.8 L4 GAS

    Auto Systems:
  • Labor Times, Manuals, Warranty, Aids
  • Starting, Charging, Battery
  • Document: Battery Testing and Replacement
    Vehicle: 1992 Acura Integra LS 1.8 L4 GAS

    Auto Systems:
  • Tools, Equipment
  • Starting, Charging, Battery
  • CLICK HERE TO GET FULL ACCESS TO 1992 Acura Integra TECHNICAL SERVICE BULLETINS!

    COMPONENT/PARTS SPECIFICATIONS FOR 1992 Acura Integra AUTOMOBILES

    BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 1992 Acura Integra cars and light trucks sold in the U.S. and Canada from 1970+.

    • Brake caliper mounting bolt torque
    • Brake drum runout, machining, & discard specs
    • Minimum brake lining thickness.
    • Brake rotor runout, parallelism, machining, discard, & finish specs

    A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 1992 Acura Integra cars and light trucks sold in the U.S. and Canada from 1980+.

    • Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap

    COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.

    PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules

    QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 1992 Acura Integra cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.

    • Automatic transmission/transaxles capacities, lubricant recommendations
    • Differential/final drive capacities, lube recommendations, grades, & viscosities
    • Final drive fill & drain plug torques
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
    • Number of lubrication fittings & plugs
    • Power steering, brake, & clutch fluid recommendations
    • Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
    • Severe service maintenance & interval recommendations
    • Tire sizes, wheel nut/bolt torque, pressures & rim sizes
    • Transfer case capacities, lube recommendations, grades, & viscosities

    TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 1992 Acura Integra cars and light trucks sold in the U.S. and Canada from 1980+

    • Airflow sensor electrical specifications
    • Tensioning specifications for systems with automatic tensioners
    • Barometric pressure sensor specs
    • Battery group number and cranking performance
    • Crankshaft & camshaft position sensor resistance
    • Engine compression pressures
    • Coolant temperature sensor specs
    • Computer advance.
    • Diesel fuel temperature sensor resistance.
    • Distributor advance specifications
    • Ignition pickup coil resistance
    • Exhaust gas recirculation temperature sensor resistance
    • Engine fastener torque values
    • Firing order diagrams
    • Fuel system pressures
    • Generator (alternator) specs
    • Intake air temperature sensor specs
    • Ignition coil specifications
    • Fuel injector resistance
    • Engine idle speeds
    • Knock sensor resistance
    • Manifold absolute pressure sensor specs
    • Mixture control solenoid resistance
    • Voltage regulator specs
    • Spark plug applications & gaps
    • Starter motor electrical specs.
    • Tensioning specifications for systems without automatic tensioners
    • Throttle body temperature sensor resistance
    • Ignition timing in degrees at rpm
    • Transmission oil temperature sensor resistance
    • Throttle position sensor specs
    • Vacuum sensor valve specs

    CLICK HERE TO GET FULL ACCESS TO 1992 Acura Integra SPECIFICATIONS DATA!

    Shop online for auto body parts, engines, wheels, lights...

    More parts
    Help me findSearch
    Auto Repair Quick Search
    Help me find
    Search DIY repair manuals by VIN...
    Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

    Find out what info we have for your vehicle

    Get the Complete Technical Service Bulletins!
    Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1992 Acura Integra vehicle.
    Access the Complete guide!
    Need To Fix Your Car or Truck?
    Save Money With Free Car Insurance Quote
    FREE car insurance quote
    Enter Zip Code:
    Auto Repair Quick Search
    Help me find