1991 Subaru Loyale Driveline, U-Joint & CV Axles Replacement (ONLINE REPAIR MANUALS)

Auto Parts Search


Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!
Help me findSearch
Get Full Access Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1991 Subaru Loyale car and truck repair procedures including Subaru engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up & drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix your 1991 Subaru Loyale automobile. Try the Automotix DIY solution today!
DIY REPAIR SAMPLES > CONTINUE EXPLORING >

We have info for following modifications of 1991 Subaru Loyale

  • 1991 Subaru Loyale 1.8 H4 GAS, CC:1781, Fuel Injection, Engine VIN:, Desg:4
  • 1991 Subaru Loyale 1.8 H4 GAS, CC:1781, Fuel Injection, Engine VIN:, Desg:5

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Subaru Loyale AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Subaru Loyale cars and light trucks from 1990+.

CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 1991 Subaru Loyale 1.8 H4 GAS

Front

  • Raise and support vehicle.
  • Remove front wheels.
  • Remove axle nut.
  • Remove parking brake cable bracket from transverse link and disconnect cable from disc brake caliper.
  • Using a drift and hammer, remove and discard driveshaft spring pin, Fig. .
  • Remove caliper support retaining bolts and disc brake assembly. Suspend assembly from strut.
  • Disconnect tie-rod end, transverse link and damper strut from axle housing.
  • Remove axle shaft with housing from differential.
  • Separate axle shaft from housing using a suitable puller. Check axle housing bearing for wear or damage and replace oil ...

CLICK HERE TO GET FULL ACCESS TO 1991 Subaru Loyale DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Subaru Loyale AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Subaru Loyale cars and light trucks from 1990+.

DRIVESHAFT, Replace
Vehicle: 1991 Subaru Loyale 1.8 H4 GAS

  • Disconnect ground cable from battery.
  • Move selector lever or gear shift lever to "N".
  • Release parking brake.
  • Jack up vehicle and support it with sturdy racks.
  • Remove rear exhaust pipe and muffler.
  • Remove front exhaust cover.
  • Remove differential mount front cover.
  • Remove four bolts which hold propeller shaft to rear differential. Put matching marks on affected parts before removal. Remove all but one bolt.
  • Remove two bolts which hold center bearing to car body.
  • Place a s...

CLICK HERE TO GET FULL ACCESS TO 1991 Subaru Loyale DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Subaru Loyale AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Subaru Loyale cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Installation -> Removal
Vehicle: 1991 Subaru Loyale 1.8 H4 GAS

Removal

  • Put matching marks on affected parts.
  • Remove bolts which hold front propeller shaft to rear propeller shaft.
  • Place companion flange in a vise and remove stake nut. Be sure not to hold propeller shaft pipe portion in vise.
  • Drive out companion flange with a puller or press. Before disassembling, put matching mark on affected parts.
  • Lightly tap head of front propeller shaft with a copper hammer un...

CLICK HERE TO GET FULL ACCESS TO 1991 Subaru Loyale DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Subaru Loyale AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Subaru Loyale cars and light trucks from 1990+.

DRIVESHAFT U-JOINT, Replace -> Installation -> Removal
Vehicle: 1991 Subaru Loyale 1.8 H4 GAS

Removal

  • Put matching marks on affected parts.
  • Remove bolts which hold front propeller shaft to rear propeller shaft.
  • Place companion flange in a vise and remove stake nut. Be sure not to hold propeller shaft pipe portion in vise.
  • Drive out companion flange with a puller or press. Before disassembling, put matching mark on affected parts.
  • Lightly tap head of front propeller shaft with a copper hammer un...

CLICK HERE TO GET FULL ACCESS TO 1991 Subaru Loyale DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Subaru Loyale AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Subaru Loyale cars and light trucks from 1990+.

DRIVESHAFT, Replace
Vehicle: 1991 Subaru Loyale 1.8 H4 GAS

  • Disconnect ground cable from battery.
  • Move selector lever or gear shift lever to "N".
  • Release parking brake.
  • Jack up vehicle and support it with sturdy racks.
  • Remove rear exhaust pipe and muffler.
  • Remove front exhaust cover.
  • Remove differential mount front cover.
  • Remove four bolts which hold propeller shaft to rear differential. Put matching marks on affected parts before removal. Remove all but one bolt.
  • Remove two bolts which hold center bearing to car body.
  • Place a s...

CLICK HERE TO GET FULL ACCESS TO 1991 Subaru Loyale DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Subaru Loyale AUTOMOBILES

Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Subaru Loyale cars and light trucks from 1990+.

CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 1991 Subaru Loyale 1.8 H4 GAS

Front

  • Raise and support vehicle.
  • Remove front wheels.
  • Remove axle nut.
  • Remove parking brake cable bracket from transverse link and disconnect cable from disc brake caliper.
  • Using a drift and hammer, remove and discard driveshaft spring pin, Fig. .
  • Remove caliper support retaining bolts and disc brake assembly. Suspend assembly from strut.
  • Disconnect tie-rod end, transverse link and damper strut from axle housing.
  • Remove axle shaft with housing from differential.
  • Separate axle shaft from housing using a suitable puller. Check axle housing bearing for wear or damage and replace oil ...

CLICK HERE TO GET FULL ACCESS TO 1991 Subaru Loyale DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES

Shop online for auto body parts, engines, wheels, lights...

More parts
Help me findSearch
Auto Repair Quick Search
Help me find
Search DIY repair manuals by VIN...
Vehicle Identification Number is a unique serial number used by the automotive industry to identify individual motor vehicles

Find out what info we have for your vehicle

Get the Complete Technical Service Bulletins!
Get the Complete Technical Service Bulletins!Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1991 Subaru Loyale vehicle.
Access the Complete guide!
Need To Fix Your Car or Truck?
Save Money With Free Car Insurance Quote
FREE car insurance quote
Enter Zip Code:
Auto Repair Quick Search
Help me find