Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1991 Subaru Loyale car and truck
repair procedures including Subaru engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1991 Subaru Loyale automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1991 Subaru Loyale
- 1991 Subaru Loyale 1.8 H4 GAS, CC:1781, Fuel Injection, Engine VIN:, Desg:4
- 1991 Subaru Loyale 1.8 H4 GAS, CC:1781, Fuel Injection, Engine VIN:, Desg:5
BRAKE SERVICE PROCEDURES FOR 1991 Subaru Loyale AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Subaru Loyale cars and light trucks from 1990+.
SUBARU, DRUM BRAKES -> PARKING BRAKE ADJUSTMENT
Vehicle: 1991 Subaru Loyale 1.8 H4 GAS
- Pull parking brake lever three to five times. On all except Legacy, mechanism should click six to seven times when a force of 55 lbs. is exerted on the lever. On Legacy, mechanism should click seven to eight times when a force of 44 lbs. is exerted on the lever.
- On all except Justy and Legacy, if lever operation is not as specified, rotate the equalizer cable adjustment nut until play at "A" in Fig. is set at 0-.02...
CLICK HERE TO GET FULL ACCESS TO 1991 Subaru Loyale BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Subaru Loyale AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Subaru Loyale cars and light trucks from 1990+.
SUBARU, POWER BRAKE UNITS -> BRAKE BOOSTER REPLACEMENT -> EXCEPT SVX -> SVX
Vehicle: 1991 Subaru Loyale 1.8 H4 GAS
EXCEPT SVX
- Disconnect brake fluid level indicator connector, if equipped.
- Remove master cylinder assembly.
- Disconnect vacuum hose from brake booster.
- Working from inside the passenger compartment, remove snap pin and operating rod clevis pin from brake pedal assembly.
- Remove brake booster retaining nuts, then brake booster from vehicle.
- Reverse procedure to install. Torque brake booster retaining nuts to 9-17 ft. lbs.
SVX
- Disconnect battery ground cable.
- R...
CLICK HERE TO GET FULL ACCESS TO 1991 Subaru Loyale BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Subaru Loyale AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Subaru Loyale cars and light trucks from 1990+.
SUBARU, ANTI-LOCK BRAKES -> DIAGNOSIS -> DIAGNOSTIC TESTS
Vehicle: 1991 Subaru Loyale 1.8 H4 GAS
To perform self diagnosis, drive vehicle at a speed greater than 20 mph for at least one minute. If system is malfunctioning, a warning lamp on the dash panel will come On. Approximately ten seconds after the light comes on, an L.E.D. located on the ABS control unit displays a trouble code. This trouble code is determined by the number of flashes the L.E.D. emits. To read codes, vehicle must remain running. Read ...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 1991 Subaru Loyale BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Subaru Loyale AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Subaru Loyale cars and light trucks from 1990+.
SUBARU, ANTI-LOCK BRAKES -> COMPONENT REPLACEMENT -> ABS HYDRAULIC UNIT -> ELECTRONIC CONTROL UNIT -> Except SVX Models -> FRONT SENSORS -> INSPECTION -> REAR SENSORS -> REPLACEMENT -> SVX Models
Vehicle: 1991 Subaru Loyale 1.8 H4 GAS
FRONT SENSORS
- Disconnect front speed sensor located in engine compartment, then remove bolts which secure harness to bracket. Do not to damage pole piece located at tip of sensor during removal.
- Remove disc brake caliper and rotor from housing.
- Remove front driveshaft, housing, then hub assembly.
- Remove tone wheel while removing hub from housing and assembly. Refer to Fig. .
- Reverse procedure to install, noting the following:
- Place a feeler gauge between speed sensors pole piece and tone wheels tooth face, on except SVX models, adjust clearance between .039-.059 inch. On SVX mod...
CLICK HERE TO GET FULL ACCESS TO 1991 Subaru Loyale BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Subaru Loyale AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Subaru Loyale cars and light trucks from 1990+.
SUBARU, ANTI-LOCK BRAKES -> DIAGNOSIS -> DIAGNOSTIC TESTS
Vehicle: 1991 Subaru Loyale 1.8 H4 GAS
To perform self diagnosis, drive vehicle at a speed greater than 20 mph for at least one minute. If system is malfunctioning, a warning lamp on the dash panel will come On. Approximately ten seconds after the light comes on, an L.E.D. located on the ABS control unit displays a trouble code. This trouble code is determined by the number of flashes the L.E.D. emits. To read codes, vehicle must remain running. Read ...
[[table data]]CLICK HERE TO GET FULL ACCESS TO 1991 Subaru Loyale BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Subaru Loyale AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Subaru Loyale cars and light trucks from 1990+.
SUBARU, DISC BRAKES -> BRAKE PADS REPLACEMENT -> FRONT -> REAR
Vehicle: 1991 Subaru Loyale 1.8 H4 GAS
FRONT
Refer to Figs. through when performing the following procedure.
- Raise and support vehicle.
- Remove front wheels.
- On all except Justy, Legacy and SVX, remove outer parking brake cable clip and disconnect cable.
- On Legacy Turbo & SVX models, disconnect brake hose from strut.
- On all except Justy with 12 inch wheels, remove caliper lockpin, then rotate caliper on guide pin.
- On Justy with 12 inch wheels, remove caliper-to-support retaining bolts, then the boot protector and caliper.
- On all models, remove brake pads from support.
- Reverse procedure to install noting the following:
- ...
CLICK HERE TO GET FULL ACCESS TO 1991 Subaru Loyale BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1991 Subaru Loyale vehicle.
|
| Access the Complete guide! |
