Auto Parts Search
We have info for following modifications of 1991 Pontiac 6000
- 1991 Pontiac 6000 LE 2.5 L4 GAS, CC:2474, CID:151, Fuel Injection, Aspiration:151, Engine VIN:, Desg:R
- 1991 Pontiac 6000 LE 3.1 V6 GAS, CID:189, Fuel Injection, Aspiration:189, Engine VIN:, Desg:T
- 1991 Pontiac 6000 SE 3.1 V6 GAS, CID:189, Fuel Injection, Aspiration:189, Engine VIN:, Desg:T
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Pontiac 6000 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Pontiac 6000 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Pontiac 6000 LE 3.1 V6 GAS
- Disconnect battery ground cable.
- Raise and support vehicle, then remove wheel and tire assembly.
- Install drive axle seal protector J-34754 or equivalent on outer joint.
- Insert a screwdriver or drift into caliper and rotor to prevent rotor from turning and remove hub nut and washer.
- Remove lower ball joint cotter pin and nut, then loosen joint using a suitable puller or tool No. J-29330. If right axle is being removed, turn wheel to left, if left axle is being removed, turn wheel to right.
- Insert a prybar between suspension support and lower control arm and sepa...
CLICK HERE TO GET FULL ACCESS TO 1991 Pontiac 6000 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Pontiac 6000 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Pontiac 6000 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Pontiac 6000 LE 2.5 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle, then remove wheel and tire assembly.
- Install drive axle seal protector J-34754 or equivalent on outer joint.
- Insert a screwdriver or drift into caliper and rotor to prevent rotor from turning and remove hub nut and washer.
- Remove lower ball joint cotter pin and nut, then loosen joint using a suitable puller or tool No. J-29330. If right axle is being removed, turn wheel to left, if left axle is being removed, turn wheel to right.
- Insert a prybar between suspension support and lower control arm and sepa...
CLICK HERE TO GET FULL ACCESS TO 1991 Pontiac 6000 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Pontiac 6000 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Pontiac 6000 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Pontiac 6000 SE 3.1 V6 GAS
- Disconnect battery ground cable.
- Raise and support vehicle, then remove wheel and tire assembly.
- Install drive axle seal protector J-34754 or equivalent on outer joint.
- Insert a screwdriver or drift into caliper and rotor to prevent rotor from turning and remove hub nut and washer.
- Remove lower ball joint cotter pin and nut, then loosen joint using a suitable puller or tool No. J-29330. If right axle is being removed, turn wheel to left, if left axle is being removed, turn wheel to right.
- Insert a prybar between suspension support and lower control arm and sepa...
CLICK HERE TO GET FULL ACCESS TO 1991 Pontiac 6000 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1991 Pontiac 6000 vehicle. |
Access the Complete guide! |