Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1991 Nissan Sentra car and truck
repair procedures including Nissan engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1991 Nissan Sentra automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1991 Nissan Sentra
- 1991 Nissan Sentra 1.6 L4 GAS, CC:1597, Fuel Injection, Engine VIN:, Desg:E
- 1991 Nissan Sentra 2.0 L4 GAS, CC:1998, Fuel Injection, Engine VIN:, Desg:G
- 1991 Nissan Sentra Classic 1.6 L4 GAS, CC:1597, Fuel Injection, Engine VIN:, Desg:P
- 1991 Nissan Sentra SE-R 2.0 L4 GAS, CC:1998, Fuel Injection, Engine VIN:, Desg:G
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Nissan Sentra AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Nissan Sentra cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Nissan Sentra 2.0 L4 GAS
- Remove wheel bearing lock nut. Tie rod does not need to be disconnected from steering knuckle. Suspend steering knuckle with wire so as not to stretch brake hose. Do not pull or twist brake hose.
- Remove clip and separate brake hose from strut.
- Remove strut lower mounting bolts.
- Separate drive shaft from steering knuckle by lightly tapping it. If it is hard to remove, use a puller. When removing drive shaft, cover boots with shop towel to prevent damage to them.
- Remove right drive shaf...
CLICK HERE TO GET FULL ACCESS TO 1991 Nissan Sentra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Nissan Sentra AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Nissan Sentra cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Nissan Sentra SE-R 2.0 L4 GAS
- Remove wheel bearing lock nut. Tie rod does not need to be disconnected from steering knuckle. Suspend steering knuckle with wire so as not to stretch brake hose. Do not pull or twist brake hose.
- Remove clip and separate brake hose from strut.
- Remove strut lower mounting bolts.
- Separate drive shaft from steering knuckle by lightly tapping it. If it is hard to remove, use a puller. When removing drive shaft, cover boots with shop towel to prevent damage to them.
- Remove right drive shaf...
CLICK HERE TO GET FULL ACCESS TO 1991 Nissan Sentra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Nissan Sentra AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Nissan Sentra cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Nissan Sentra Classic 1.6 L4 GAS
- Remove wheel bearing lock nut. Tie rod does not need to be disconnected from steering knuckle. Suspend steering knuckle with wire so as not to stretch brake hose. Do not pull or twist brake hose.
- Remove clip and separate brake hose from strut.
- Remove strut lower mounting bolts.
- Separate drive shaft from steering knuckle by lightly tapping it. If it is hard to remove, use a puller. When removing drive shaft, cover boots with shop towel to prevent damage to them.
- Remove right drive shaf...
CLICK HERE TO GET FULL ACCESS TO 1991 Nissan Sentra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Nissan Sentra AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Nissan Sentra cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Nissan Sentra 1.6 L4 GAS
- Remove wheel bearing lock nut. Tie rod does not need to be disconnected from steering knuckle. Suspend steering knuckle with wire so as not to stretch brake hose. Do not pull or twist brake hose.
- Remove clip and separate brake hose from strut.
- Remove strut lower mounting bolts.
- Separate drive shaft from steering knuckle by lightly tapping it. If it is hard to remove, use a puller. When removing drive shaft, cover boots with shop towel to prevent damage to them.
- Remove right drive shaf...
CLICK HERE TO GET FULL ACCESS TO 1991 Nissan Sentra DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1991 Nissan Sentra vehicle.
|
| Access the Complete guide! |
