Auto Parts Search
We have info for following modifications of 1991 Mercury Tracer
- 1991 Mercury Tracer 1.9 L4 GAS, CID:116, Fuel Injection, Aspiration:116, Engine VIN:, Desg:J
- 1991 Mercury Tracer LTS 1.8 L4 GAS, CID:112, Fuel Injection, Aspiration:112, Engine VIN:, Desg:8
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Mercury Tracer AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Mercury Tracer cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Mercury Tracer 1.9 L4 GAS
If removing both right and left side halfshafts, appropriate plugs must be installed. Failure to do so may result in dislocation of differential side gears, necessitating transaxle disassembly to re-align gears.
- Raise and support vehicle.
- Remove wheel and splash shield.
- Raise staked portion of halfshaft retaining nut using suitable tool.
- Remove retaining nut and discard.
- Remove cotter pin from tie rod end and separate tie rod end from steering knuckle using a suitable tie rod remover tool.
- Remove lower ball joint clamp bolt and pry down on lower control arm to separate ball joi...
CLICK HERE TO GET FULL ACCESS TO 1991 Mercury Tracer DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1991 Mercury Tracer AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1991 Mercury Tracer cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1991 Mercury Tracer LTS 1.8 L4 GAS
If removing both right and left side halfshafts, appropriate plugs must be installed. Failure to do so may result in dislocation of differential side gears, necessitating transaxle disassembly to re-align gears.
- Raise and support vehicle.
- Remove wheel and splash shield.
- Raise staked portion of halfshaft retaining nut using suitable tool.
- Remove retaining nut and discard.
- Remove cotter pin from tie rod end and separate tie rod end from steering knuckle using a suitable tie rod remover tool.
- Remove lower ball joint clamp bolt and pry down on lower control arm to separate ball joi...
CLICK HERE TO GET FULL ACCESS TO 1991 Mercury Tracer DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1991 Mercury Tracer vehicle. |
Access the Complete guide! |