Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1991 Dodge Daytona car and truck
repair procedures including Dodge engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1991 Dodge Daytona automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1991 Dodge Daytona
- 1991 Dodge Daytona 2.5 L4 GAS, CC:2507, CID:153, Fuel Injection, Aspiration:153, Engine VIN:, Desg:K
- 1991 Dodge Daytona 2.5 L4 GAS, CC:2507, CID:153, Fuel Injection, Aspiration:153, Engine VIN:, Desg:J
- 1991 Dodge Daytona 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:3
- 1991 Dodge Daytona ES 2.5 L4 GAS, CC:2507, CID:153, Fuel Injection, Aspiration:153, Engine VIN:, Desg:K
- 1991 Dodge Daytona ES 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:3
- 1991 Dodge Daytona Shelby 2.5 L4 GAS, CC:2507, CID:153, Fuel Injection, Aspiration:153, Engine VIN:, Desg:J
- 1991 Dodge Daytona Iroc 2.5 L4 GAS, CC:2507, CID:153, Fuel Injection, Aspiration:153, Engine VIN:, Desg:J
- 1991 Dodge Daytona Iroc 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:3
BRAKE SERVICE PROCEDURES FOR 1991 Dodge Daytona AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Dodge Daytona cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEM, CHRYSLER CORP. -> DIAGONALLY SPLIT HYDRAULIC BRAKE SYSTEMS
Vehicle: 1991 Dodge Daytona 2.5 L4 GAS
This system operates on the same principles as conventional front and rear split systems using primary and secondary master cylinders moving simultaneously to exert hydraulic pressure on their respective systems.
The hydraulic brake lines on this system, however, have been diagonally split front to rear (left front to right rear and right front to left rear) in place of ...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge Daytona BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Dodge Daytona AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Dodge Daytona cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEM, CHRYSLER CORP. -> DIAGONALLY SPLIT HYDRAULIC BRAKE SYSTEMS
Vehicle: 1991 Dodge Daytona ES 2.5 L4 GAS
This system operates on the same principles as conventional front and rear split systems using primary and secondary master cylinders moving simultaneously to exert hydraulic pressure on their respective systems.
The hydraulic brake lines on this system, however, have been diagonally split front to rear (left front to right rear and right front to left rear) in place of ...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge Daytona BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Dodge Daytona AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Dodge Daytona cars and light trucks from 1990+.
DRUM BRAKES, CHRYSLER CORP. -> Type 2 & 3-Kelsey-Hayes & Varga Leading Trailing Drum Brakes -> REMOVAL
Vehicle: 1991 Dodge Daytona Shelby 2.5 L4 GAS
- Raise and support rear of vehicle.
- Remove tire and wheel assembly, then remove brake drum. If brake lining is dragging on brake drum, back off brake adjustment by rotating adjustment screw.
- Using suitable pliers, remove adjuster lever spring,Fig. .
- Remove adjuster lever.
- Turn automatic adjuster screw out to expand shoes past wheel cylinder boot.
- Disconnect parking brake cable from parking brake lever.
- On Type 2-Kelsey Hayes, using suitable tool, remove hold-down springs.
- Pull brake shoe assembly down and away from anchor plate, then remove brake shoe springs and adjusting screw assembly.
- On Typ...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge Daytona BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Dodge Daytona AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Dodge Daytona cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEM, CHRYSLER CORP. -> WHEEL CYLINDERS SERVICE -> Assembly -> Disassembly -> INSTALLATION -> OVERHAUL -> REMOVAL
Vehicle: 1991 Dodge Daytona ES 3.0 V6 GAS
REMOVAL
- Remove wheel, drum and brake shoes.
- Loosen brake line fitting at wheel cylinder. Do not pull metal line away from cylinder.
- Remove screws holding cylinder to backing plate.
- Separate wheel cylinder from brake line and backing plate by pulling the cylinder outward and away from backing plate.
OVERHAUL
Note position of all parts as they are removed for proper installation.
Disassembly
- Refer toFig. , then remove boots, pistons, cups and spring from wheel cylinder.
- Wipe cylinder walls with denatured alcohol or clean brake fluid.
- Examine cylinder bore. A scored bore may be honed...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge Daytona BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Dodge Daytona AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Dodge Daytona cars and light trucks from 1990+.
HYDRAULIC BRAKE SYSTEM, CHRYSLER CORP. -> TYPE 1-COMPOSITE MASTER CYLINDER -> DESCRIPTION -> Installation -> MASTER CYLINDER OVERHAUL -> MASTER CYLINDER, REPLACE -> Removal -> RESERVOIR, REPLACE -> TESTING
Vehicle: 1991 Dodge Daytona Iroc 3.0 V6 GAS
DESCRIPTION
This master cylinderFig. , is comprised of an aluminum body, pistons, springs, O-rings, cup seals, and a reinforced nylon reservoir. The bore of the aluminum body is anodized for durability, and to prevent corrosion and pitting. The reservoir caps contain diaphragms with precision slits for controlled equalization of pressure.
TESTING
Ensure the master cylinder compensates in both ports by applying the brake pedal lightly (engine running with power brakes) and observing brake fluid squirting up in the reservoir chambers. Due to a baffle incorporated in ...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge Daytona BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1991 Dodge Daytona AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1991 Dodge Daytona cars and light trucks from 1990+.
DISC BRAKES, CHRYSLER CORP. -> Type 12-Kelsey-Hayes Dual Pin Floating Caliper Disc Brake, Rear -> BRAKE PADS
Vehicle: 1991 Dodge Daytona 2.5 L4 GAS
- Raise and support vehicle.
- Remove rear wheel and tire assembly.
- Remove caliper retaining bolts, then lift caliper away from adapter rails.Hang caliper from wire away from rotor.
- Remove outer brake pad by prying pad retainin...
CLICK HERE TO GET FULL ACCESS TO 1991 Dodge Daytona BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1991 Dodge Daytona vehicle.
|
| Access the Complete guide! |
